UNITY Lasers ELITE 5 PRO Manual de usuario
USER MANUAL
ELITE 5 PRO | ELITE 10 PRO
ELITE 20 PRO | ELITE 30 PRO
Notice
AVOID EYE OR SKIN EXPOSURE
TO DIRECT OR SCATTERED LIGHT
CLASS 4 LASER PRODUCT
Manufactured / Certified by
Unity Lasers s.r.o.
Odborárska 23
831 02 Bratislava
Slovakia, Europe
Classified per IEC 60825-1: 2014
Complies with US FDA CDHR laser safety
standards 21 CFR 1040.10 & 1040.11
and Laser notice 56
UNITY Lasers s.r.o. Raw series Operational Manual (Revision 2022-10)
CONTENTS
INTRODUCTION 3
WHAT IS INCLUDED 3
UNPACKING INSTRUCTIONS 3
GENERAL INFORMATION 3
SAFETY NOTES 4
LASER AND SAFETY NOTES 5
PRODUCT SAFETY LABEL LOCATION 7
PRODUCT SAFETY LABELS 8
INTERLOCK CONNECTION DIAGRAM 9
INSTRUCTIONS FOR USING ESTOP SYSTEM 10
THEORY OF OPERATION 11
PROPER USAGE 11
RIGGING 11
OPERATION 12
SAFETY TESTS 14
ESTOP FUNCTION 14
INTERLOCK RESET FUNCTION POWER 14
KEY SWITCH FUNCTION 14
INTERLOCK RESET FUNCTION REMOTE INTERLOCK BYPASS 14
MODEL SPECIFICATION 15
PRODUCT SPECIFICATION ELITE 5 PRO 15
FRONT & REAR PANEL VIEW ELITE 5 PRO 16
DIMENSION DETAILS ELITE 5 PRO 17
PRODUCT SPECIFICATION ELITE 10 PRO 18
FRONT & REAR PANEL VIEW ELITE 10 PRO 19
DIMENSION DETAILS ELITE 10 PRO 20
PRODUCT SPECIFICATION ELITE 20 PRO 21
FRONT & REAR PANEL VIEW ELITE 20 PRO 22
DIMENSION DETAILS ELITE 20 PRO 23
PRODUCT SPECIFICATION ELITE 30 PRO 24
FRONT & REAR PANEL VIEW ELITE 30 PRO 25
DIMENSION DETAILS ELITE 30 PRO 26
ILDA PINOUT SPECIFICATION 27
TECHNICAL INFORMATION MAINTENANCE 28
SERVICE 28
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10)
3
Thank you for purchasing your purchase. To optimize the performance of your laser, please read these operating
instructions carefully and familiarize yourself with the basic operations of this system. These instructions
contain important safety information regarding the use and maintenance of this system as well. Please keep
this manual with the unit, for future reference. If you sell this product to another user, be sure that they also
recieve this document.
Notice
• We are constantly striving to improve the quality of our products. As such, the content of this
manual may be changed without notice.
• We have tried our best to guarantee the accuracy of this manual. If you have any questions or find
any errors, please contact us directly to help address this.
WHAT IS INCLUDED
INTRODUCTION
NAME
Elite PRO Laser
Control cable ILDA 10m
Power cord AC 1,5m
Keys for Projector key switch
Keys for E-stop box
E-stop box Unity
E- stop box connecting cable 10m
Remote interlock bypass 3pin
User guide
PCS
1
1
1
2
2
1
1
1
1
Remark
UNPACKING INSTRUCTIONS
• Open the package and carefully unpack everything inside.
• Ensure all parts are present and in good condition.
• Do not use any equipment that appears to be damaged.
• If any parts are missing or damaged then please immediately notify your carrier or local distributor.
GENERAL INFORMATION
The following chapters explain important information about lasers in general, basic laser safety and some
tips about how to use this device correctly. Please read this information as it contains critical information
you must be aware of, prior to using this system.
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10)
4
SAFETY NOTES
WARNING! This projector is Class 4 laser product. It must never be used for audience-scanning applications.
The output beam of the projector must always be at least 3 metres above the floor in the audience. See the
Operating Instructions section for further information.
Please read the following notes carefully! They include important safety information about the installation,
usage, and maintenance of this product.
• Keep this User Manual for future consultation. If you sell this product to another user, be sure that they also
receive this document.
• Always make sure that the voltage of the outlet to which you are connecting this product is within the range
stated on the decal or rear panel of the product.
• This product is not designed for use outdoors in adverse weather conditions. To prevent risk of fire or shock,
do not expose this product to rain or moisture.
• Always disconnect this product from the power source before cleaning it or replacing the fuse.
• Make sure to replace the fuse with another of the same type and rating.
• If mounting it overhead, always secure this product to a fastening device using a safety chain or cable.
• In the event of a serious operating problem, stop using the projector immediately. Never try to repair the unit
except in a controlled environment under trained supervision. Repairs carried out by unskilled people can
lead to damage or malfunction of the unit, as well as exposure to dangerous laser light.
• Never connect this product to a dimmer pack.
• Make sure the power cord is not crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
• Never carry a product from the power cord or any moving part. Always use the hanging/mounting bracket or
the handles.
• Always avoid eye or skin exposure to direct or scattered light from this product.
• Lasers can be hazardous and have unique safety considerations. Permanent eye injury and blindness is
possible if lasers are used incorrectly. Pay close attention to each safety REMARK and WARNING statement
in this user manual. Read all instructions carefully BEFORE operating this device.
• Never intentionally expose yourself or others to direct laser light.
• This laser product can potentially cause instant eye injury or blindness if laser light directly strikes the eyes.
• It is illegal and dangerous to shine this laser into audience areas, where the audience or other personnel
could get direct laser beams or bright reflections into their eyes.
• It is a US Federal oense to shine any laser at aircraft.
• No service allowed by customer. There are no user serviceable parts inside the unit. Do not attempt any
repairs yourself.
• Service is only to be handled by the factory or authorized factory trained technicians.
• Product is not to be modified by the customer.
• Caution – use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10)
5
LASER AND SAFETY NOTES
STOP AND READ ALL THE LASER SAFETY NOTES BELOW
Laser Light is dierent from any other light sources with which you may be familiar. The light from this product can
cause eye and skin injury if not set up and used properly. Laser light is thousands of times more concentrated
than light from any other kind of light source. This concentration of light can cause instant eye injuries, primarily
by burning the retina (the light sensitive portion at the back of the eye). Even if you cannot feel “heat” from
laser beam, it can still potentionally injure or blind you or your audience. Even very small amounts of laser light
are potentionally hazardous even at long distances. Laser eye injuries can happen quicker than you can blink.
It is incorrect to think that because these laser entertainment products use high speed scanned laser beams,
that an individual laser beam is safe for eye exposure. It is also incorrect to assume that because the laser light
is moving, it is safe. This is not true.
Since eye injuries can occur instantly, it is critical to prevent the possibility of any direct eye exposure. It is not
legal to aim this laser projector into areas where people can be exposed. This is true even if it is aimed below
people’s faces, such as on a dance floor.
• Do not operate the laser without first reading and understanding all safety and technical data in this manual.
• Always set up and install all laser eects so that all laser light is at least 3 metres (9.8 feet) above the floor on
which people can stand. See the “Proper Usage” section later in this manual.
• After set up, and prior to public use, test the laser to ensure proper function. Do not use if any defect is
detected.
• Laser Light - Avoid Eye or Skin Exposure to Direct or Scattered Light.
• Do not point lasers at people or animals.
• Never look into the laser aperture or laser beams.
• Do not point lasers in areas where people can potentionally be exposed, such as uncontrolled balconies, etc.
• Do not point lasers at highly reflective surfaces, such as windows, mirrors and shiny metal objects. Even laser
reflections can be hazardous.
• Never point a laser at aircraft, as this is a US Federal Oense.
• Never point un-terminated laser beams into the sky.
• Do not expose the output optic (aperture) to cleaning chemicals.
• Do not use the laser if the housing is damaged, open, or if the optics appear damaged in any way.
• Never leave this device running unattended.
• In the United States, this laser product may not be purchased, sold, rented, leased or loaned for use unless
the recipient possesses a valid Class 4 laser light show variance from the US FDA CDRH.
• This product must always be operated by a skilled and well-trained operator who is familiar with the valid
Class 4 laser light show variance from the CDRH as stated above.
• The legal requirements for using laser entertainment products vary from country to country. The user is
responsible for the legal requirements at the location/country of use.
• Always use appropriate lightning safety cables when hangng this projector overhead.
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10)
6
LASER EMISSION DATA
• Class 4 Laser Projector - Avoid Eye and Skin Exposure to Direct or Scattered Light!
• This Laser Product is designated as Class 4 during all procedures of operation.
• Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1 Standard
“For Safe Use of Lasers”, available from the Laser Institute of America: www.laserinstitute.org. Many
local governments, corporations, agencies, military and others, require all lasers to be used under the
guidelines of ANSI Z136.1.
UNITY Lasers s.r.o.
• Laser Classification Class 4
• Red Laser Medium AlGaInP, 639 nm, depending on model
• Green Laser Medium InGaN, 520-525 nm, depending on model
• Blue Laser Medium InGaN, 445 nm to 465 nm depending on model
• Beam Diameter <10 mm at aperture
• Divergence (each beam) <2 mrad
• Maximum total output power 5 – 30 W, depending on model
LASER COMPLIANCE STATEMENT
• This laser product complies with FDA performance standards for laser products except for deviations
pursuant to Laser Notice No. 56, dated May 8, 2019. This laser device is classified as a Class 4
demonstration laser product.
• No maintenance is required to keep this product in compliance with laser performance standards.
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10)
7
PRODUCT SAFETY LABEL LOCATION
FRONT PANEL
1. Aperture Label
2. Hazard Warning Symbol
TOP PANEL
3. Aircraft Warning Label
4. Logotype Danger Label
5. Interlocked Housing Label (duplicate label is located inside the laser projector and is visible when the
top cover is removed)
See next page for large reproductions of the product labels. All these labels must be intact and legible prior
to using the projector.
4
44
4
2
2
2 2
33
3
3
11
5
5
5
5
PRO 5 PRO 10
PRO 30PRO 20
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10)
8
PRODUCT SAFETY LABELS
IEC 60825 - 1:2014
___W AT ________nm
Diode Laser
__ W MAX OUTPUT AT __ nm
__ W MAX OUTPUT AT __ nm
__ W MAX OUTPUT AT __ nm
Logotype Danger Label
Hazard Warning Symbol
CAUTION
LASER LIGHT IS BRIGHT AND
BLINDING DO NOT SHINE AT
AIRCRAFT OR VEHICLES AT
ANY DISTANCE
Aircraft Warning Label
Interlocked Housing Label
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10)
9
INTERLOCK CONNECTION DIAGRAM
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10)
10
INSTRUCTIONS FOR USING E-STOP SYSTEM
Connect the E-stop box to the 3-pin interlock connector on the rear of the laser projector using a 3-PIN XLR
cable.
** Note that the E-stop box has an available secondary interlock port. The secondary port is to be used to interface a secondary
interlock device (e.x. door switch or pressure sensitive step pad). If a secondary interlock device is NOT used then the secondary
port must have the bypass shunt plug inserted.
The diagram below outlines the pinout configuration for the 3-pin connection from E-STOP box to the rear of
the projector.
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Proyector de UNITY Lasers
