United Technologies MobileView 9000 Series Manual de usuario
MobileView 9000 & 9100
Series Analog/IP Camera
User Manual
P/N 1072868 • REV A • ISS 05NOV14
Copyright
© 201
4 United Technologies Corporation.
MobileView
is part of UTC Building & Industrial Systems, a unit of United Technologies
Corporation.
All rights reserved.
Trademarks and patents
The MobileView product name
and logo are trademarks of United Technologies.
Other trade names used in this document may be trademarks or registered trademarks
of the manufacturers or vendors of the respective products.
Manufacturer
UTC Building & Industrial Systems
4001 Fairview Industrial Dr. SE
,
Salem
, OR 97302, USA
Authorized EU manufacturing representative:
UTC Climate Controls & Security B.V.,
Kelvinstraat 7, 6003 DH Weert, Netherlands
Intended use
Use this product only for the purpose it was designed for; refer to the data sheet and
user documenta
tion for details. For the latest product information, contact your local
supplier or visit us online at www.interlogix.com.
Certification
N4131
Complete additional sections according to the governing laws and standards for the
intended market plac
e.
FCC compliance
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
You are
cautioned that any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate the
equipment.
ACMA compliance
Notice!
This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate measures.
European Union
directives
1999/5/EC (R&TTE directive):
Hereby, UTC Building & Industrial Systems declares that
this device is in compliance with the essential
requirements and other relevant
provisions of Directive 1999/5/EC.
2002/96/EC (WEEE directive):
Products marked with this symbol cannot be disposed
of as unsorted municipal waste in the European Union. For proper recycling, return this
product to your
local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more information see:
www.recyclethis.info.
2006/66/EC (battery directive):
This product contains a battery that cannot be
disposed of
as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with this symbol,
which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For
proper recyclin
g, return the battery to your supplier or to a designated collection point.
For more information see: www.recyclethis.info.
Contact information
For contact information, see
www.interlogix.com/mobileview/.
Content
System Requirements 3
Camera Network Connections 4
Wiring over LAN 4
Detecting and Changing the IP Address 5
Accessing the Camera 6
Accessing by Web Browser 6
Live View 9
Live View Page 9
Starting Live View 10
Recording and Capturing Pictures Manually 10
Camera Configuration 11
Configuring Local Parameters 11
Configuring Time Settings 13
Configuring Network Settings 15
Configuring Video andAudio Settings 28
Configuring Image Parameters 31
Configuring and HandlingAlarms 37
Handling Exception 42
Others 44
Managing User Accounts 44
Configuring RTSPAuthentication 46
Anonymous Visit 47
IPAddress Filter 48
Viewing Device Information 50
Maintenance 51
RS-232 Settings 53
Defog Settings (only available on MVC-9000) 54
IR Settings 54
Telnet Settings 54
MobileView 9000 & 9100 Series Analog/IP Camera User Manual i
System Requirements
Table 1: System Requirements
Operating System
Microsoft Windows XP SP1 and above /Vista/Win 7 32bits
CPU
Intel Premium IV 3.0 GHz or higher
RAM
1 GB or higher
Display
1024 x768 resolution or higher
Web Browser
Microsoft Explorer 6.0 and above, Mozilla Firefox 3.5 and above,
Google Chrome 8 and above
MobileView 9000 & 9100 Series Analog/IP Camera User Manual 3
Camera Network Connections
Wiring over LAN
The following figures show the two ways of cable connection of a network
camera and a computer:
• To test the network camera, you can directly connect the network camera to a
computer with a network cable as shown in Figure 1 below.
• Refer to Figure 2 below for connection of the network camera by LAN via a
switch or a router.
Figure 1: Direct Connection
Figure 2: Connecting via a Switch or Router
4 MobileView 9000 & 9100 Series Analog/IP Camera User Manual
Detecting and Changing the IP Address
You need the IP address of the camera to connect to the network camera using a
computer. If you already know the IP address of the camera, skip to the next
section, Accessing the Camera. The default IP address is 192.168.1.70, subnet
is 255.255.255.0, and the port number is 8000. The default user name is admin,
and password is 1234.
1. To get the IP address, you can install the Mobileview Camera Finder to list
online devices.
2. To change the IP address and subnet mask as needed, input the new values
in the appropriate fields, input the camera password, and click Save.
MobileView 9000 & 9100 Series Analog/IP Camera User Manual 5
Accessing the Camera
Accessing by Web Browser
1. Open the web browser.
2. In the address field, input the IP address of the network camera, e.g.,
192.168.1.70 and press the enter key to access the login interface.
3. Input the user name and password, and click Login.
Note: The default user name is admin, and the password is 1234.
Figure 3: Login Interface
4. When prompted, please follow the installation prompts to install the plug-in.
MobileView 9000 & 9100 Series Analog/IP Camera User Manual 6
Figure 4: Download and Install Plug-in
Figure 5: Install Plug-in (1)
MobileView 9000 & 9100 Series Analog/IP Camera User Manual 7
Figure 6: install Plug-in (2)
Note: You must close the web browser to install the plug-in. Please reopen the
web browser and log in again after the plug-in is installed.
8 MobileView 9000 & 9100 Series Analog/IP Camera User Manual
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
