Unitech Tashi MT200 Manual de usuario
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Intercom & Access Control Terminal
MT200
Quick Reference Guide
400723G Version 1.0
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
English
About This Manual
This manual explains how to install, operate and maintain the MT200 Intercom
& Access Control Terminal.
No part of this publication may be reproduced or used in any form, or by any
electrical or mechanical means, without permission in writing from the
manufacturer, which includes photocopying, recording, or information storage
and retrieval systems. The material in this manual is subject to change without
notice.
© Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved.
Unitech TASHI Web site: http:\\www.unitech-sbd.com
Unitech Global Web site: http:\\www.unitech-adc.com
Regulatory Compliance Statements
FCC Warning Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following:
¾Relocate the receiving antenna.
¾Increase the separation between the equipment and receiver.
¾Connect the equipment into an outlet on a circuit that is different from
the receiver.
¾Consult the dealer or an experienced radio/television technician for
help.
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
English
Canadian Compliance Statement
Industry Canada Notice Operation is subject to the following two conditions: (1)
This device may not cause interference and (2) This device must accept any
interference, including interference that may cause undesired operation of the
device.
European Conformity Statement
Declaration of Conformity with Regard to the R&TTE 1999/5/EC and EMC 89/336/
EEC directives.
RoHS Statement
This device conforms to RoHS (Restriction of Hazardous
Substances) European Union regulations that set
maximum concentration limits on hazardous materials
used in electrical and electronic equipment.
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
English
Taiwan NCC Warning Statement
根據 NCC 低功率電波輻射性電機管理辦法 規定:
第十二條 經型式認證合格之低功率射頻電機，非經許
可，公司、商號或使用者均不得擅自變更頻率、
加大功率或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干
擾合法通信；經發現有干擾現象時，應立即停
用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信法規定作業之無線電
通信。
低功率射頻電機須忍受合法通信或工業、科學
及醫療用電波輻射性電機設備之干擾。
Warranty
The following items are covered under Unitech Limited Warranty:
zMT200 Intercom & Access Control Terminal -- 1-year limited warranty.
zCables -- three-month limited warranty.
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
English
Contents of Package
After Opening the box, ensure that the following items are present.
MT200 Model MiFare Card (Optional)
Power Adapter (Optional) Terminal Block Plug
Unitech CD-ROM
(User Manual / Quick Reference Guide)
If there is a shortage of parts or if there are defective parts, please contact
regional sales representatives.
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
English
Front View
Rear View
Speaker
Microphone
2.0 Megapixel
CMOS Camera
LED Indicator
Touch Sensor
MiFare Scan Sensor
Terminal Block
Female Socket
DC Input Jack
Mini USB
Port (Client)
Ethernet Port
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
English
Using Terminal Block
MT200 is designed with a 12-pin terminal block for input/output signals. To
install the 12-pin block, refer to the instruction made below.
1. Insert the stripped ends of the wires respectively into terminal block
sockets of the male plug (see the illustration made below), and then
tighten the lock screw to secure the wire.
2. Then, insert the terminal block
plug into the female socket of
MT200.
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
English
Terminal Block Pin Assignment
Pin Name Description
1 (N/A) (N/A)
2 (N/A) (N/A)
3 D1+ Input Anode (+)
4 D1- Input Cathode (-)
5 RS485+ RS485, Positive
6 RS485- RS485, Negative
7 R1-C Common
8 R1-NO Normal Open
9 R1-NC Normal Close
10 (N/A) (N/A)
11 12 Vin DC IN 12V
12 GND GND
Relay Output
RL1-CTRL→High R1 (C & NO Linked)
RL1-CTRL→Low R1 (C & NC Linked)
Digit Input
D1+ and D1- are the positive and negative terminals of the external power
input.
D1 = High Digit input1 = High
D1 = Low Digit input1 = Low
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
English
Using MT200
MT200 is easy for users and visitors respectively to open the door and call the
house owner to open the door.
Using Mifare card for access control
MT200 is featured with a MiFare scan sensor
compatible with the Mifare card. Thus, you may
keep the card near the black sensor area at the
distance of approximately 4cm to make MT200
read the card data. After reading the right data,
MT200 will drive the door to open.
Touching the sensor with your finger for doorbell ringing
MT200 is featured with a touch sensor that you
may touch with your finger in the center of sensor
area to make the doorbell ring. Visitors may call
persons in the house by touching the sensor to
open the door.
Otros manuales para Tashi MT200
1
Tabla de contenidos
Idiomas:
Otros manuales de Sistema de intercomunicación de Unitech
