UniStrong UT30 Manual de usuario
UT30 Quickstart guide
2.Battery Charging
•Charge with travel charger
Insert the small plug end of the USB data cable into the TYPE-C port
of the device, insert the large plug end of the USB data cable into the
travel charger plug, and then insert the travel charger plug into a
power outlet to charge.
Charge with USB data cable
Connect the cable and the device with USB type-c interface, and plug
in the other end with adapter.
Note: During normal charging, the home screen status bar will display
the charging icon when screen is on.
When the charging is completed, the home screen status bar will display
the full battery icon when screen is on.
3. Insert SIM card, memory card and battery
Power off the device before installing or removing the SIM card, MicroSD
card or battery.
Flip the device to its rear, follow the directions shown in Figure 1 and
push the back cover lock to the open position, and remove the battery
cover. Install the SIM card and MicroSD card according to the battery
compartment label instructions, as shown in Figure 2.
Picture 1 Picture 2
Face the SIM card metal contacts downwards and push into the slot.
Take note on the direction of the notched corner.
Face the MicroSD card metal contacts downwards and push into the
slot. Take note on the direction of the notched corner.
Align the contacts of the battery with the terminals of the battery
compartment and put in the battery gently.
After the battery is installed, replace the battery compartment
cover and push the back cover lock to locked position to secure the
battery compartment cover.
4. Turning the device on and off
To turn on the device, firmly press and hold the bottom right【Power
Button】until the boot screen appears.
To turn off the device, firmly press and hold the 【Power Button】to
display the options menu. Select the Power off option to shutdown.
With the device turned on, press the 【Power Button】to turn off the
screen and go into sleep mode; Press the 【Power Button】again to
wake the device, swipe upwards on the screen to unlock; If the device
has been idle for a period of time, the screen will automatically turn off
and go into sleep mode.
5. Home screen operation
From the home screen, you can view the device status and access the
applications. The home screen can have multiple panels; Swipe left or
right on the screen to view each panel.
At the top of the home screen is the status bar, which contains the
notification area, the status area and the display area; the shortcut panel
is at the bottom.
Using the notification panel
When new notification icons appear in the notification area of the status
bar, hold the status bar and drag down to open the notification panel; To
hide the panel, drag the bottom border of the panel upwards.
Customize the shortcut panel
You can customize the shortcuts at the bottom of the home screen by
adding or removing “Shortcut Icons”.
To remove the “Shortcut icon”, press and hold the “Shortcut icon” and
drag it to the “Delete icon”. To add a “Shortcut icon”, press and hold the
icon on the home screen and drag it to the Shortcut panel.
Using applications
Slide the screen left and right to see all the included applications.
Touch the [Home button] below the screen to close it and return to the
home screen.
Expanding the home screen
Swipe your finger horizontally on the home screen to expand to the left
or right of the home screen.
Adding an icon on the home screen
Press and hold any application or widget icon and drag it to an empty
area on the home screen.
Moving icons on the home screen
Press and hold the icon on the home screen and drag the icon to the
desired location on the screen.
Removing icons on the home screen
Press and hold the home screen icon and drag the icon to the "Delete"
icon until the icon turns red.
Create folder
On the home screen, folders are automatically formed when you drag an
icon onto another icon.
Touch the new folder on the screen to open it.
Click on the folder’s label to rename it.
Changing the home screen wallpaper
Press and hold a blank area on the home screen or touch the [Menu
button] →"Wallpaper" to change the home screen wallpaper by
selecting options such as wallpaper, live wallpaper, gallery, etc.
6. Connecting to a computer
Use the USB data cable to connect the device to the computer, pull down
the top status bar, and you can see the message "Connected as a media
device" in the notification area. Clicking on that notification bar will bring
up 3 options "Media device", "Camera" and "Charging mode", which can
be selected according to your needs. Select "Media device" mode to
transfer files between the device and the computer.
If you need to remove the MicroSD card when the device is turned on,
slide the screen to the left or right "→Settings, or touch the [Menu
button] →"System Settings", go into the Settings panel, scroll down
the screen, and then select "Save"→"Uninstall SD Card".
7. Installation and management of applications
Users can enter the applications store to download and install related
application programs.
Slide the screen left or right →"Settings", select "Apps", or touch the
[Menu button] →"Manage apps" to view and manage application
programs on your device.
8. Using Beidou/GPS positioning function
Slide the screen left and right →"Settings", select "Location
Information" to go into the location service panel, turn on the location
information switch.
In the "Satellite Positioning Mode" option, select GPS + BDS or GPS +
GLONASS or BDS options as needed.
The meaning of the following 2 options:
The NMEA switch turns on the NMEA data output function, which
requires the use of a dedicated data line.
SBAS: To use differential positioning.
The user can view the status of the BeiDou Satellite, GPS satellites and
GLONASS satellites at the current position through an application with
the corresponding functions. The program can display real-time
information such as the serial number, signal strength, position of the
satellite, etc. at the current position.
After the location service is turned on, the applications downloaded and
installed from the applications store can obtain the current location
information and provide location-related services and applications
through the corresponding service interfaces.
Note: "Satellite Positioning Mode" "SBAS" is only supported in certain
models.
9. Camera and videos
Slide the screen left and right →”Camera”, to turn on the camera, the
screen orientation will change according to how the device is held.
Use two fingers to make a gesture of zooming in or zooming out on the
subject.
Touch the camera switch icon on the top middle part of the screen to
select the front or rear camera.
Touch the button at the bottom right of the screen to switch between
taking photos and videos.
After taking a photo or video, tap the gallery button at the bottom left of
the screen to share, delete, edit or other operations.
Tabla de contenidos
