UnionNet SP2100 Manual de usuario
1
SMARTPHONE BLUETOOTH BARCODE SCANNER
REFERENCE MANUAL
[ SP-2100 ]
** For 1D Laser / 1D CCD / 2D CCD **
UNIONNET
Copyright@2010 UnionNet Co , Ltd
(Version 1.33)
GOMARO s.a.
La Rosaire 5
CH – 1123 Aclens (Switzerland)
Tel: +41 (0)21 869 97 70 Fax : +41 (0)21 869 96 02
www gomaro ch
2
IMPORTANT NOTI ES
Precautions for Use
- Read precautions carefully before using
Before installation
1 Please let this be away from the direct ray of light, heating system like a heater
2 It can be interrupted with magnetics
3 Please do not install this around water
4 It can cause (a)trouble(s) if It drops
When ontrolling,
1 Please do not sprinkle water on it directly and do not clean with benzene,
thinner, or alcohol, etc
2 Please do not touch and look up the beam directly
3 Please do not break it up, fix it up, and reorganize it
4 Please do not use it as a toy of children
5 Please do not spill coffee or drink on it
6 Please contact our Service Center directly when it needs to be fixed
7 Please charge the battery with the Rated Voltage
8 Please use only the Genuine USB cable included, in case of use of PC USB
cable for computer, it can be damaged
You can also connect to ‘ http://www gomaro ch ‘
PRE AUTIONS
3
ONTENTS
BASI FUN TION
1. Precautions ………………………………………………………………………………………………………… 2
2. ontents ……………………………………………………………………………………………………………… 3
3. omposition ………………………………………………………………………………………………………… 4
4. Exterior View ……………………………………………………………………………………………………… 5
5. Battery harging…………………………………………………………………………………………………… 6
How TO USE
6. Turn On / Off & Auto Pairing………………………………………………………………………………… 6
7. Barcode Scan & Firmware ready mode & Scanner reset setting ……………………………….. 7
INSTALLATION (WINDOWS)
8. How to install SP-2100 driver to Windows XP / Vista / Windows ...................................... 8 - 9
APPLI ATION & SYSTEM MENU
9. Available application for SP-2100 testing ……………………………………………………………… 10
10. Battery harging & Reading Barcodes …………………………………………………………… 11-12
11. SP-2100 System Menu ………………………………………………………………………………… 13-16
12. ANDROID UniReaderSPP……………………………………………………………………………… 17-18
13. iOS(iPhone / iPad / iPod touch) Uni-Linker…………………………………………………………… 19
14. Symbology ……………………………………………………………………………………………………… 20
DATA TRANSMISSION TO MOBILES
15-1. Windows mobile………………………………………………………………………………………… 21 -27
15-2. Android (SPP Profile) ………………………………………………………………………………… 28 -31
15-3. Android (HID profile) ………………………………………………………………………………… 32 -34
15-4. iOS (HID profile) ……………………………………………………………………………………… 35 -37
15-5. iOS (MFI profile) ……………………………………………………………………………………… 38 -40
SETTINGS
16. Settings of Barcode Scanner ………………………………………………………………………… 41 - 63
INFORMATION
17. ontact(A/S center) ……………………………………………………………………………………… End
4
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
Barcode Scanner
USB Cable USB Adaptor Lanyard
USB Cigar Jack for CAR (OPTION)
OMPOSITION (SP-2100)
5
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
①MAIN BUTTON: POWER & scan the Barcode
②Down Scroll Button : Checking the barcode data
③Up Scroll Button : Checking the barcode data & enter to System Menu
④LCD Window : Checking the Scanner status & Barcode data in real time
⑤LED : Green / Red LEDs & Checking the scanned Barcode success or not
⑥Mini USB charging port & reset button
⑦Dust Cover for scanner engine
⑧Buzzer
EXTERIOR VIEW
①
②
③ ④
⑤
⑥
⑦
⑧
89mm(L) * 43mm(W) * 19mm(H)
6
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
①
①
BATTERY HARGING & TURN ON/OFF & AUTO Reconnect / Disconnect
Battery harging:
Users can easily use a Cigar Jack or USB cable with
adaptor to charge the SP-2100
Turn On: Put No 1 button about 3 seconds
Turn Off: It will automatically turn off according to
the Power Auto-Off settings
Turn Off (shortcut key): Press the Scan button for
about 7 seconds then it will turn off directly
Auto-Reconnect:
Pls press the “down button” only one time when
the scanner’s pairing is disconnected from the
device Then after about 1 - 2 sec , SP-2100 will be
completely reconnected to the latest device
Disconnect:
Pressing the “down button” about 3 sec when BT is
connected to the device
①
7
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BAR ODE S AN & FIRMWARE READY MODE & S ANNER RESET SETTING
How to scan the Barcodes:
The Barcode data will be indicated with a beep
sound on the OLED Screen, when users press the
Scan Button into the distance of about 10 - 30cm
Firmware Ready Mode:
To upgrade its firmware, users first need to go to a
“firmware upgrade mode” b pressing the scan
button + up button simultaneously, then the LED
will be flashing and it means ready
Scanner Rest:
If user needs to reset the scanner, pls press the
reset button which is located at bottom left of the
scanner
8
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
Windows XP / Vista / Windows 7
WARNING: DO NOT CONNECT SP-2100 SCANNER TO USB PORT PRIOR TO
INSTALLATION
1 Insert SP-2100 Installation CD into our computer’s CD drive.
2 Go to Driver Folder in the CD
3 Click SP-2100 Driver and then try to install the driver at your computer
* You can download the driver at our homepage as follows *
http://www unionnet co kr/eng/products/list_new asp?ref=15&title=Bluetooth Barcode Scanner
NOTES
• If you have any problems, please refer to the Manual Installation section
SP-2100 DRIVER SETUP
Below are the screen images you will see during the installation of SP-2100 Driver
① Try to connect the SP-2100 to the PC using the USB cable
& turn-on the SP-2100 scanner for driver installation ready
②After a few minutes, the [Driver Software Installation] program is automatically run and
select <The Driver folder, you can find it into the CD > SP-2100 Driver, if your PC ask for
a suitable driver, and select the <Next> button
INSTALLATION with Windows XP / Vista / Windows 7
9
③If you see the following message on your PC, then it means that the program is
successfully installed
④User can verify installed COM Port in Device Manager as below
Notes: After installation, if you see either “SP-2100 BARCODE SCANNER (COM5)”
or “AT91 USB to Serial Converter (COM5)”, it means that the installation is successfully
done
10
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
Android
Download and install “UniReaderSPP” and “UniLinker” from the Android Market
UniReaderSPP UniLinker
iPad/iPhone/iPod touch
Download and install “Uni-Linker” from the Apple App Store
AVAILABLE APPLI ATIONS FOR SP-2100 TESTING
Otros manuales para SP2100
1
Tabla de contenidos
Otros manuales de Lector de código de barras de UnionNet
