Uniden EXP2900 Manual de usuario

Features •900 MHz Extended Range Technology

•3 One-Touch Priority Keys

•7 Hour Talk Time/14 Day Standby Time

•10 Number Memory Dialing

•30 Channel Autoscan

•32 Digit Redial

The EXP2900 Series features include

AAuuttooTTaallkk

and

AAuuttooSSttaannddbbyy

AutoTalk

allows you to

answer a call by just removing the handset from the base so you don’t have to waste time

pushing buttons or flipping switches. AutoStandby allows you to hang up by simply

returning the handset to the base.

The

UUllttrraaCClleeaarrPPlluuss

true compander circuitry virtually eliminates background noise. This

innovative technology, together with 30 different channels, provides you with the best

possible reception during all your conversations.

To protect you against misbilled calls which might result from your phone being activated

by other equipment, the EXP2900 Series has

RRaannddoommCCooddee

digital security which

automatically selects one of over 65,000 digital security codes for the handset and base.

Also, the

AAuuttooSSeeccuurree

feature electronically locks your phone when the handset is in the base.

BBeessuurreettoovviissiittoouurrwweebbssiittee::wwwwww..uunniiddeenn..ccoomm

Welcome The Uniden EXP2900 Series 900 MHz cordless phones are designed and engineered to exacting

standards for reliability, long life, and outstanding performance.

NNoottee::SSoommeeiilllluussttrraattiioonnssiinntthhiissmmaannuuaallmmaayyddiiffffeerrffrroommtthheeaaccttuuaalluunniittffoorr

eexxppllaannaattiioonnppuurrppoossee..

•AutoStandbyTM

•AutoTalkTM

•Handset Earpiece and Ringer Volume Control

•Hearing Aid Compatible

•Page/Find

•Tone/Pulse Dialing

Uniden®is a registered trademark of Uniden America Corporation.

AutoTalk, AutoStandby, UltraClear Plus, Random Code, and AutoSecure are trademarks of Uniden America Corporation.

Contents

Welcome/Features

Controls and Functions 2

Getting Started

Checking the Package Contents 3

Setting up the Phone 4

Mounting the Base Unit on a Wall 9

Basics

Making and Receiving Calls 11

Terminology 12

Adjusting Ringer and Earpiece Volume 12

Redial 12

Tone Dialing Switch-over 13

Traveling Out-of-Range 13

Selecting a Different Channel 14

Page 14

Flash and Call Waiting 14

Memory Dialing

Storing a Phone Number in Memory 15

Dialing a Stored Number 16

Chain Dialing 17

Erasing a Stored Number from Memory 17

Additional Information

Changing the Digital Security Code 18

Note on Power Sources 19

Maintenance 19

Troubleshooting 20

General Information 22

Technical Information 23

[ 2 ] CONTROLS AND FUNCTIONS[ 2 ]

Controls and Functions

1. Handset earpiece

2. Talk/batt LED

3. Talk key

4. */tone key

5. Redial key

6. Pause key

7. One-Touch Priority

(m1, m2, and m3) keys

8. Handset microphone and ringer speaker

9. Memory (m) key

10. Flash key

11. Handset ringer tone and earpiece

volume key

12. Channel (chan) key

13. Handset charging contacts

14. Handset retainer clip

15. Status LED

16. Page/find key

GETTING STARTED [ 3 ]

GETTING STARTED

Checking the Package Contents

• BBaasseeuunniitt• HHaannddsseett• AACCaaddaapptteerr• RReecchhaarrggeeaabbllee

bbaatttteerryy

• TTeelleepphhoonneeccoorrdd

Uniden Parts Department at (800) 554-3988

Hours: M-F 7:00 a.m. to 5:00 p.m. CST. We can also be

reached on the web at www.uniden.com

Make sure you have received the following items in the package. If any of these items

are missing or damaged, contact the Uniden Parts Department (see below).

AAllssooiinncclluuddeedd::

•This Owner’s Manual

•Precautions and Important Safety

Instructions/Warranty Information

GETTING STARTED

[ 4 ]

DDootthheeffoolllloowwiinnggsstteeppss::

A. Choose the best location

B. Install the battery pack

AA..CChhoooosseetthheebbeessttllooccaattiioonn

Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS

included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS brochure. Here are

some important guidelines you should consider:

AAvvooiiddeexxcceessssiivveemmooiissttuurree,,

eexxttrreemmeellyylloowwtteemmppeerraattuurreess,,

dduusstt,,mmeecchhaanniiccaallvviibbrraattiioonn,,oorrsshhoocckk

Setting up the Phone

AAvvooiiddhheeaattssoouurrcceess,,ssuucchhaass

rraaddiiaattoorrss,,aaiirrdduuccttss,,aannddssuunnlliigghhtt

AAvvooiiddtteelleevviissiioonnsseettssaanndd

ootthheerreelleeccttrroonniicceeqquuiippmmeenntt

AAvvooiiddnnooiisseessoouurrcceessssuucchhaassaawwiinnddoowwbbyy

aassttrreeeettwwiitthhhheeaavvyyttrraaffffiicc

AAvvooiiddmmiiccrroowwaavveeoovveennss

AAvvooiiddppeerrssoonnaallccoommppuutteerrss

AAvvooiiddootthheerrccoorrddlleesssstteelleepphhoonneess

CChhoooosseeaacceennttrraallllooccaattiioonn

C. Connect the base unit

D. Choose the dialing mode

•The location should be close to both a phone jack and a continuous power outlet

which is not switchable.

•Keep the base and handset away from sources of electrical noise such as motors,

microwave ovens, and fluorescent lighting.

•Be sure there is sufficient space to raise the base antenna to a vertical position.

•The base can be placed on a desk, tabletop, or mounted on a standard wall plate.

[ 5 ]

GETTING STARTED

BB..IInnssttaalllltthheebbaatttteerryyppaacckk

CChhaarrggeetthheebbaatttteerryyppaacckkffoorraattlleeaasstt1122--1155hhoouurrssbbeeffoorreepplluuggggiinngg

tthheepphhoonneelliinneeiinnttooyyoouurrpphhoonnee..

1)Press in on the battery cover release and slide the cover

down until it comes off.

2)Connect the battery pack connector observing correct

polarity (black and red wires) to the jack inside the battery

compartment.

Do not exert any force on this connection. It could cause

damage to the battery or handset. The plastic connector

will fit together only one way. Once you are certain that

you have made a good connection, then insert the battery

pack into the battery compartment. Do not pinch the wires.

3)Securely close the battery compartment cover by sliding it

up until it snaps into place.

4)Place the handset on the base.

Use only the Uniden

battery (BT-905)

supplied with your

phone. Replacement

batteries are also

available through the

Uniden Parts

Department

(see page 3).

[ 6 ] GETTING STARTED

BBaatttteerryyuusseettiimmee((ppeerrcchhaarrggee))

From fully charged

•Seven hours continuous use

•Fourteen days when the handset is in the standby mode

LLoowwBBaatttteerryyAAlleerrtt

When the battery pack is very low and needs to be charged, the phone is

programmed to eliminate functions in order to save power. If the phone is not in

use, the

ttaallkk//bbaatttt

LED flashes when the battery pack is low.

If the phone is in use, the

ttaallkk//bbaatttt

LED flashes and the handset beeps. Complete

your conversation as quickly as possible and return the handset to the base for

charging.

CClleeaanniinnggtthheeBBaatttteerryyCChhaarrggiinnggCCoonnttaaccttss

TToommaaiinnttaaiinnaaggooooddcchhaarrggee,,iittiissiimmppoorrttaannttttoocclleeaanntthhee

bbaatttteerryyccoonnttaaccttssoonntthheehhaannddsseettaannddbbaasseeuunniittwwiitthhaaddrryy

ccllootthhoorraappeenncciilleerraasseerraabboouuttoonncceeaammoonntthh..

DDoonnoottuusseeaannyylliiqquuiiddssoorrssoollvveennttss..

•Even when the

battery pack is not

being used, it will

gradually discharge

over a long period of

time. For optimum

performance, be sure

to return the handset

to the base unit after

each telephone call .

•If you must replace

the battery pack

during a telephone

call, complete the

replacement within

30 seconds, and you

can return to the

original call.

The last number dialed in the redial memory and the numbers stored in the

memory locations are retained for up to 1 minute while you replace the

battery pack.

GETTING STARTED [ 7 ]

GETTING STARTED

CC..CCoonnnneecctttthheebbaasseeuunniitt

1)Connect the AC adapter to the

DDCCIINN99VV

jack

and a standard 120V AC wall outlet.

2)Set the base on a desk or tabletop, and place

the handset on the base unit as shown. (For

wall mounting, see "Mounting the Base Unit

on a Wall", on page 9.)

3)Then raise the antenna to a vertical position.

4)Make sure the

ssttaattuuss

LED lights. If the LED does not

light, check to see that the AC adapter is plugged in

and the handset makes good contact with the base

charging contacts.

Place the power cord so

that it does not create a

trip hazard or where it

could become chafed

and create a fire or

electrical hazard.

•Use only the supplied AD-310 AC adapter. Do not

use any other AC adapter.

•Connect the AC adapter to a continuous

power supply.

•Place the base unit close to the AC outlet so that

you can unplug the AC adapter easily.

The handset can be

placed face up or face

down in the base for

charging.

[ 8 ] GETTING STARTED

If your telephone outlet isn’t

modular, contact your telephone

company for assistance.

DD..CChhoooosseetthheeddiiaalliinnggmmooddee

Most phone systems use tone dialing which sends DTMF tones through the phone lines.

However some phone systems still use pulse dialing such as in rural areas. The default

setting is tone dialing. Depending on your dialing system, set the mode as follows:

1)Press and hold

ffllaasshh

until you hear a confirmation tone.

2)To set the dial mode for pulse dialing, press

Or to set the dial mode for tone dialing, press */

ttoonnee

A confirmation tone sounds to indicate the setting is complete.

•If you are not sure of your dialing system, set for tone dialing. Make a trial call.

If the call connects, leave the setting as is, otherwise set for pulse dialing.

•If your phone dialing system requires pulse dialing and you need to send DTMF

tones for certain situations during a call, you may "switch-over" to tone dialing.

(Refer to "Tone Dialing Switch-over" on page 13.)

Modular

Make sure your battery

pack is fully charged

before choosing the dial

mode.

5)Connect the telephone line cord to the

TTEELLLLIINNEE

jack and a telephone outlet once the handset is

fully charged.

After installing the battery pack in the handset, charge your handset at least

1122--1155hhoouurrssbbeeffoorreepplluuggggiinnggiinnttootthheepphhoonneelliinnee. Once the handset battery pack is

fully charged, connect the telephone line cord to the base and telephone wall outlet.

Tabla de contenidos

Otros manuales de Teléfono de Uniden

Uniden

Uniden WDECT 2300 Manual de usuario

Uniden

Uniden 1035 Series Manual de usuario

Uniden

Uniden DSS7955+1 Series Manual de usuario

Uniden

Uniden SSE34 Series Manual de usuario

Uniden

Uniden D1680-4XTA Manual de servicio

Uniden

Uniden EXP7241 Series Manual de usuario

Uniden

Uniden 1360BK Manual de servicio

Uniden

Uniden DECT2035 Manual de usuario

Uniden

Uniden DECT1480-3 Manual de usuario

Uniden

Uniden FP100 Manual de usuario

Uniden

Uniden CEZ200 Manual de usuario

Uniden

Uniden D3098S Manual de usuario

Uniden

Uniden FP205 Manual de usuario

Uniden

Uniden DECT1363BK Manual de servicio

Uniden

Uniden DXAI4588-2 Manual de usuario

Uniden

Uniden DXAI5588-3 Series Manual de usuario

Uniden

Uniden DECT1363 Series Manual de usuario

Uniden

Uniden MC 724 Manual de usuario

Uniden

Uniden DGMax DGA940 Manual de usuario

Uniden

Uniden FP1100 Manual de usuario

Uniden

Uniden DECT4066 Manual de usuario

Uniden

Uniden CEZAI998A Manual de servicio

Uniden

Uniden 1360 Manual de usuario

Uniden

Uniden WDECT2385 Manual de usuario

Manuales populares de Teléfono de otras marcas

GE 2-9480 Manual de usuario

Geemarc

Geemarc PHOTOPHONE 155 Manual de usuario

D-Link

D-Link DWR-720/PW Manual de usuario

Interquartz

Interquartz Gemini IQ333 Manual de usuario

SSS Siedle

SSS Siedle HT 840-0 Manual de usuario

Motorola

Motorola TITANIUM Manual de usuario

Panasonic

Panasonic ICX Manual de usuario

LG H870DS Manual de usuario

Samsung

Samsung GT-I9500 Manual de usuario

AT&T

AT&T Trimline 205 Manual de usuario

Selta

Selta zenyth 600 Manual de usuario

Doro

Doro AFTI 20 Manual de usuario

UNIQCELL

UNIQCELL A1 Manual de usuario

Panasonic

Panasonic KX Series Manual de usuario

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manual de usuario

BT Decor 425 Manual de usuario

NEC

NEC SV8500 Manual de usuario

Teledex

Teledex PEARL Manual de usuario