Uniden BT359 Manual de usuario
BT359 Bluetooth® Headset
User’s Guide
Also in this package:
Extra ear cushion AC (indoor) power adapter
Questions? Problems?
Get help on the web at www.uniden.com
or call our Customer Service line at 800-292-2294.
2
Getting to Know the Headset
Using the headset at excessive volume can
cause permanent hearing loss. To reduce the
risk of hearing damage, use the minimum
volume level necessary (see page 17).
Reading the LEDs
State Meaning
Flashing together The headset is turned on.
1 ash every 5
seconds The headset is in pairing mode.
2 ashes every 5
seconds
The headset is currently paired to a
Bluetooth device.
Steady The headset is charging. The LEDs
turn o when the battery is charged.
Alternately ashing The headset is in pairing mode.
Speaker
(inside ear
cushion)
Multi-
function
button
Ear
cushion
Power
connector
Speaker
(inside ear
cushion)
Multi-
function
button
Ear
cushion
Power
connector
Ear hook
Volume
Down
button LEDs
Volume Up
button
Ear hook
Volume
Down
button LEDs
Volume Up
button
3
Using the Buttons
The buttons only activate the function when you release them.
Muti-function
Press to Press & hold for
2 seconds to 4 seconds to
In standby: redial the last number.
While a call is ringing: answer
the call.
On a call: hang up.
–
–
–
In standby: activate voice dialing.
While a call is ringing: reject the call.
On a call: send the call to your phone.
When the headset is o: turn it on.
–
–
–
–
In standby:
turn the
headset o.
–
VoluMe up
Press to Press & hold for
2 seconds to 4 seconds to
On a call: increase
the volume.
– In standby: activate voice
dialing on your 2nd phone.
– On a call: put the current call on
hold and switch to a waiting call.
–
4
VoluMe Down
Press to Press & hold for
2 seconds to 4 seconds to
On a call: decrease
the volume.
–In standby: redial the last number
on your 2nd phone.
On a call: mute the microphone.
–
–
On a call: hang up the current
call and switch to a waiting
call.
–
Setting Up Your Headset
Charge the Battery
Before using your headset, charge the battery for at least 2 hours.
Charging the battery completely (and keeping it charged) will help you
get the longest possible talk and standby time out of the battery. With
average use, the battery provides about 4 hours of talk time and 120
hours of standby time.
5
Connect the adapter to the power connector on the top of the headset,
then plug it into any standard 120 V AC (regular indoor) power outlet.
Use ONLY the power adapter supplied with the headset! Using any other adapter
could damage your headset, create a re hazard, or cause a risk of electric shock!
Checking the battery
When the battery is low, the headset sounds an alert tone every 20
seconds. To check the current status of the battery, press
VoluMe up
and
VoluMe Down
at the same time. The headset announces the battery status
as “Battery low,”“Battery normal,” or “Battery high.”
Pair the Headset to Your Phone
Pairing “introduces”two Bluetooth devices and gives them permission
to connect to each other. If you want to use the headset with more than
one phone, you need to pair it with each phone separately. Once you
pair a phone to the headset, the two devices can connect automatically
whenever they can detect each other.
6
Make sure the headset is powered o and the power adapter is not
connected (you can’t use the headset while it’s charging).
Press & hold
Multi-function
until the LEDs ash alternately. The
headset is in pairing mode and should be visible to other Bluetooth
devices.
On your phone, start a search for Bluetooth headsets or hands-free
devices. (This process may take several seconds, and it will be dierent
for each mobile phone; see your phone’s owner’s manual for detailed
instructions.)
Your phone should discover a device called a BT359 or BT359 headset.
When your phone asks if you want to pair with this device, answer yes.
When your phone prompts you for a PIN code or password to pair
with the BT359, enter
0000
.
When the headset is paired, the LEDs ash twice every 5 seconds. Your
phone might display a conrmation message, also.
Your phone might ask if you want to change the headset’s name;
generally, you should only change the name if you have more than
one BT359 headset that you use with this phone.
1)
2)
3)
4)
5)
6)
7)
7
Connect to Your Phone
Most phones connect to the headset as soon as you pair it; if yours won’t,
turn the headset o and back on. If headset still won’t connect, check
your phone’s owner’s manual for additional Bluetooth information.
Once the headset is paired
Whenever you turn the headset on, it automatically tries to connect to
whatever device it was connected to last.
If the headset loses the connection (e.g., if your phone is out of range),
press
Multi-function
to reconnect.
Using Your Headset
To put your headset on, insert the ear cushion in your right ear, then
wrap the earhook behind your ear.
Finding the “Sweet Spot”
Everyone’s ear has a sweet spot, a particular angle of the speaker where
the audio comes in loud and clear. Take a few minutes to move the
headset around until you nd the best angle for the ear cushion.
•
•
8
Switching to Your Left Ear
If you want
to wear the
headset on
your left
ear, take the
earhook o
and turn it
over.
Turning the Headset On and O
To turn on the headset, press & hold
Multi-function
until you hear the
Power-on melody (about 2 seconds). Press & hold
Multi-function
for
about 4 seconds to turn the headset o.
9
Common Tasks
Make a call
Dial from your phone as usual. Your phone should automatically send the
call to the headset. If it doesn’t, press & hold
Multi-function
for 2
seconds to send the call to the headset manually.
Answer a call Press
Multi-function
while the call is ringing.
Hang up a call On a call, press
Multi-function
.
Reject a call Press & hold
Multi-function
until you hear a beep (about 2 seconds).
Change the volume On a call, press
VoluMe up
for more volume or
VoluMe Down
for less.
Mute the
microphone
Press & hold
VoluMe Down
for about 2 seconds. While the microphone
is muted, the headset plays a melody every 10 seconds. To turn the
microphone back on, press either
VoluMe up
or
VoluMe Down
.
Redial the last
number
With the phone in standby, press
Multi-function
. When the phone
displays the number, press
Multi-function
again.
Activate voice
dialing
With the phone in standby, press & hold
Multi-function
for about 2
seconds. When you hear a beep, you can use any command you have already
programmed into your phone. (The phone must support voice dialing.)
Send a call back to
your phone.
Press & hold
Multi-function
for 2 seconds. The headset sends the call to
the phone & disconnects from the phone.
10
Special Features
Using the Headset with 2 Phones
You can connect your headset to two Bluetooth devices and use them
at the same time. Just pair the headset to the rst phone following the
instructions on page 4. Then, pair the headset to the second phone.
This feature may not be compatible with certain mobile phones.
Using Both Phones
The headset stays connected to both phones until a call comes in. If
you answer the call, the headset disconnects from the other phone for
the duration of the call. When you hang up, the headset automatically
reconnects to the other phone.
Only one phone at a time can be on an active call.
The headset plays a dierent ring tone for each phone so you know
which one is ringing. To answer the call, press
Multi-function
as usual.
All the button functions remain the same for the rst phone (the one
you paired rst).
•
•
•
•
Tabla de contenidos
Otros manuales de Auriculares de Uniden
Uniden
Uniden BTHS500 Manual de usuario
Uniden
Uniden BT-109 Manual de usuario
Uniden
Uniden BT108 Manual de servicio
Uniden
Uniden BT230 Manual de usuario
Uniden
Uniden BT-109 Manual de usuario
Uniden
Uniden BT112APT Manual de usuario
Uniden
Uniden BTS200 Manual de usuario
Uniden
Uniden BT112 Manual de usuario
Uniden
Uniden BT229 - Bluetooth Headset Manual de usuario
Uniden
Uniden BT110 Manual de usuario
Uniden
Uniden BT-955 Manual de usuario
Uniden
Uniden BT230 Manual de servicio
Uniden
Uniden BTS200 Manual de usuario
Uniden
Uniden BT110 Manual de servicio
Uniden
Uniden BT229 - Bluetooth Headset Manual de servicio
Uniden
Uniden BT229 - Bluetooth Headset Manual de usuario
Uniden
Uniden DHS100 Manual de usuario
Uniden
Uniden DECT HS950 Manual de usuario
Uniden
Uniden EXAI 7248 SERIES Manual de usuario
