Uniden XDECT 8105 Manual de usuario

XDECT 8105

Accessory Handset

For more exciting new products please visit our website:

Australia: www.uniden.com.au

New Zealand: www.uniden.co.nz

When using your telephone equipment, basic safety precautions should

always be followed to reduce the risk of fire, electric shock and injury to

persons, including the following:

• This unit is NOT waterproof. DO NOT expose this unit to moisture.

• DO NOT expose this unit to rain.

• Do not use this product near water, for example, near a bath tub,

wash bowl, kitchen sink or laundry tub, in a wet basement or near a

swimming pool.

• Avoid using a telephone (other than a cordless type) during an

electrical storm. There may be a remote risk of electric shock from

lightning.

• Do not use the telephone to report a gas leak in the vicinity of the leak.

SAVE THESE INSTRUCTIONS!

IMPORTANT SAFETY INSTRUCTIONS

• The grant of a NZ Telepermit for any item of terminal equipment

indicates only that Telecom has accepted that the item complies with

minimum conditions for connection to its network. It indicates no

endorsement of the product by Telecom, nor does it provide any sort

of warranty. Above all, it provides no assurance that any item will work

correctlyin all respects with another item of Telepermitted equipment

of a differentmake or model, nor does it imply that any product is

compatiblewith all of Telecom’s network services.

• The maximum volume setting of this telephone exceeds the Telecom

specified volume requirement. Telecom takes no responsibility for the

high volume available on this telephone, who believe this telephone is

too loud should contact the manufacturer at the website indicated on

owner’s manual warranty page.

• For telephone networks other than Telecom there may be a charge

incurred for local calls if the Insert 0 feature is on. Turn Insert 0 off.

• This equipment may not provide for the effective hand-over of a call to

another device connected to the same line.

General Notices for New Zealand Model:

If any item is missing or damaged, contact your place of purchase

immediately. Never use damaged products!

Need help? Get answers at our website:

• www.uniden.com.au for Australian model

• www.uniden.co.nz for New Zealand model.

What’s in the Box?

XDECT 8105 accessory

handset with charger

Rechargeable Battery

Pack

AC adaptor

XDECT 8105

Battery Cover

This handset is designed for use with Uniden’s XDECT 8115 and XDECT

8155 bases.

Compatible Bases

REGISTERING TO A BASE

INSTALLING YOUR HANDSET

The accessory handset won’t work until you register it to a

compatible Uniden cordless phone!

1. Unpack the handset, battery pack, and battery

cover. If you need to remove the cover, press in

on the notch and slide the cover down and off.

2. Line up the battery connector with the jack inside

the handset; the connector only fits one way.

3. Push the connector in until it clicks into place; tug

gently on the wires to make sure the battery is

securely connected.

4. Replace the battery cover and slide it into place.

5. Use the AC adaptor to connect the power jack on the charger to a

regular indoor (240V AC) power outlet.

6. Place the handset in the charger with the display facing forward. If the

display doesn’t light up, reseat the handset or connect the charger to

a different outlet.

Charge the Battery

#Charge the handset completely (about 15 hours) before using it.

Installing the Beltclip

Line up the holes on each side of the handset.

To attach the belt clip; Insert into the holes on each side of the handset.

Press down until it clicks.

To remove the belt clip; Pull either side of the belt clip to release the

tabs from the holes.

Your handset may be used with the Uniden HS915 headset. To use this

feature, insert the headset plug into the headset jack. Your handset is

ready for hands-free conversations. Headsets can be purchased online,

see the website details on the front cover.

Headset Installation

If.. Try..

xyou don’t hear a dial tone

xthe display says Registration

Failed

Making sure the handset is fully

charged, before trying again.

Test the Connection

Registration Methods

This handset is designed for use with XDECT 8115 and XDECT 8155

bases. For the most up-to-date list of compatible bases with this handset,

see our website.

Does the handset fit in the base cradle?

Yes Place the handset in the base. The display should say

Registering.

No Does the base have an LCD display?

Yes On the base, open the menu and select

Registering.

On the handset, press and hold #DND until the

display shows Registering (about 2 seconds).

No On the base, press and hold FIND HS when the

phone is in standby (about 5 seconds).

On the handset, press and hold #DND until the

handset display shows Registering (about 2

seconds).

#After about 30 seconds, the handset display should say Registration

Complete.

Pick up the handset and press TALK/FLASH. Make sure you get a dial

tone. (Press END to hang up.)

RESETTING THE HANDSET

If you are having trouble with a handset or if you want to replace one, you

need to clear the registration information from the base and the handset:

Parts Number Input Voltage Output Voltage

AAD-600S(M) 100-240V AC, 50/60Hz 9V DC @ 210mA

Type Capacity Talk time Standby Time

BT-694 or

BT-694s

BT- 694n

650mAh or 500mAh

or 400mAh

about 10 hours about 7 days

IMPORTANT INFORMATION

AC Adaptor

Battery Information

1. All features and operation for the handset are described in the owner’s

manual for the base.

2. Owner’s Manual for all Uniden phones are available on our website for

free downloading.

• Use only the supplied AC adaptors.

• Use the proper adaptor for the base and any chargers.

• Do not place the unit in direct sunlight or subject it to high

temperatures.

• Replace the battery when the talk or standby time becomes

noticeably reduced. For replacements, visit the online shop on our

website (see the front cover).

• When the battery gets low, the handset beeps and shows a low

battery alert; put the handset in the cradle for recharging.

Do you have the base the HS is registered to?

Yes No

1. Press & hold END and #until

the System Reset menu appears

(about 5 seconds).

2. Select Deregister HS. The display

lists all registered handsets.

3. Select the HS you want to reset.

4. 4. When the phone asks you to

confirm, select Yes. The HS clears

its information from the base &

deletes it own link to the base.

1. Press & hold END and #until

the System Reset menu appears

(about 5 seconds).

2. Select Base Unavailable.

3. When the phone asks you to

confirm, select Yes. The handset

deletes its own link without

contacting the base.

ONE-YEAR LIMITED WARRANTY

Terms of Warranty: Uniden Aust/NZ warrants to the original retail

purchaser only that the XDECT 8105 (“the Product”), will be free

from defects in materials and craftsmanship for the duration of the

warranty period, subject to the limitations and exclusions set out below.

Warranty Period: This warranty to the original retail purchaser is only

valid in the original country of purchase for a Product first purchased

either in Australia or New Zealand and will expire one (1) year from the

date of the original retail sale. If a warranty claim is made, this warranty

will not apply if the Product is found by Uniden to be:

A. Damaged or not maintained in a reasonable manner or as recommended

in the relevant Uniden Owner’s Manual;

B. Modified, altered or used as part of any conversion kits, subassemblies

or any configurations not sold by Uniden Aust or Uniden NZ;

C. Improperly installed contrary to instructions contained in the relevant

Owner’s Manual

D. Repaired by someone other than an authorized Uniden Repair Agent in

relation to a defect or malfunction covered by this warranty; or

E. Used in conjunction with any equipment, parts or a system

notmanufactured by Uniden.

Parts Covered: This warranty covers the Product and included

accessories.

User-generated Data: This warranty does not cover any claimed loss of

or damage to user-generated data (including but without limitation phone

numbers, addresses and images)that may be stored on your Product.

Satisfactory evidence of the original purchase is required for warranty

service. Please refer to our Uniden website for any details or warranty

durations offered in addition to those contained below.

The warrantor is either Uniden Australia Pty Limited ABN 58 001 865 498

(“Uniden Aust”) or Uniden New Zealand Limited (“Uniden NZ”) as the

case maybe.

XDECT 8105

Important:

Warrantor:

Statement of Remedy: If the Product is found not to conform to this

warranty as stated above, the Warrantor, at its discretion, will either

repair the defect or replace the Product without any charge for parts or

service. This warranty does not include any reimbursement or payment

of any consequential damages claimed to arise from a Product’s failure to

comply with the warranty. Our goods come with guarantees that cannot

be excluded under the Australian Consumer Law. You are entitled to a

replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the

goods repaired or replaced if the goods fail to be of acceptable quality and

the failure does not amount to a major failure. This warranty is in addition

to and sits alongside your rights under either the COMPETITION AND

CONSUMER ACT 2010 (Australia) or the CONSUMER GUARANTEES

ACT (New Zealand) as the case may be, none of which can be excluded.

Procedure for Obtaining Warranty Service: Depending on the

country in which the Product was first purchased, if you believe that

your Product does not conform with this warranty, you should deliver

the Product, together with satisfactory evidence of your original

purchase (such as a legible copy of the sales docket) to Uniden at the

addresses shown below. You should contact Uniden regarding any

compensation that may be payable for your expenses incurred in making

a warranty claim. Prior to delivery, we recommend that you make a

backup copy of any phone numbers, images or other data stored on

your Product, in case it is lost or damaged during warranty service.

UNIDEN AUSTRALIA PTY LTD

Service Division

345 Princes Highway,

Rockdale, NSW 2216

Phone number: 1300 366 895

Email: [email protected]

UNIDEN NEW ZEALAND LTD

Service Division

150 Harris Road, East Tamaki

Auckland 2013

Phone number: (09) 273 8377

Email: [email protected]

Printed in Vietnam U01UU282BZZ(0)

U01UU297BZZ(0)

2013

Tabla de contenidos

Otros manuales de Auricular de Uniden

Uniden

Uniden DECT 6015 Manual de usuario

Uniden

Uniden WDSS 5305 Manual de usuario

Uniden

Uniden D1484 series Manual de usuario

Uniden

Uniden DCX291 Manual de lista de piezas

Uniden

Uniden DCX700 Manual de usuario

Uniden

Uniden ELX500 Manual de usuario

Uniden

Uniden XDECT 7005 Manual de usuario

Uniden

Uniden DCX320 Manual de usuario

Uniden

Uniden XDECT 7005 Manual de usuario

Uniden

Uniden XDECT SSE07 Manual de usuario

Uniden

Uniden 2305 Manual de usuario

Uniden

Uniden DECT 1715+1 Manual de usuario

Uniden

Uniden DSS8900 Series Manual de usuario

Uniden

Uniden DSS 5805 Manual de usuario

Uniden

Uniden DCX770 - DCX 770 Cordless Extension Handset Manual de usuario

Uniden

Uniden TCX 805 Manual de usuario

Uniden

Uniden WDECT2380 Manual de usuario

Uniden

Uniden TCX4 Series Manual de usuario

Uniden

Uniden DCX309 Manual de usuario

Uniden

Uniden DCX200 Series Manual de usuario

Uniden

Uniden Elite 8805 Manual de usuario

Uniden

Uniden DRX402 Manual de usuario

Uniden

Uniden XDECT SSE35 Series Manual de usuario

Uniden

Uniden DCX170BT Manual de usuario

Manuales populares de Auricular de otras marcas

Swissvoice

Swissvoice ePure HD Manual de usuario

Philips

Philips TD6736/BH051P Manual de usuario

ASCOM

ASCOM I62 - Manual de usuario

LG-Ericsson

LG-Ericsson LIP-9010 Manual de usuario

GE 1583 Manual de usuario

iiNet

iiNet Handset Manual de usuario

ASCOM

ASCOM 9p23 Manual de usuario

AT&T

AT&T DLP70110 Manual de usuario

AirCell

AirCell ST 3100 Manual de usuario

Eaton

Eaton HHIR-LCD-PROG Instrucciones de montaje

Mitel

Mitel 112 Manual de usuario

SBC

SBC SBC-381H Manual de usuario

Mitel

Mitel 5602 Manual de usuario

ASCOM

ASCOM d81 Messenger Instrucciones de instalación

SpectraLink

SpectraLink 7522 Manual de usuario

Avaya

Avaya L100 Series Cómo utilizar

ooma

ooma HD2 Handset Manual de usuario

Yealink

Yealink IPW56 Manual de usuario