Uniden DECT1905 Manual de usuario

Ver. 1, Mar 05

USER GUIDE

THIS EQUIPMENT IS NOT DESIGNED FOR

MAKING EMERGENCY TELEPHONE CALLS

WHEN THE POWER FAILS. ALTERNATIVE

ARRANGEMENTS SHOULD BE MADE FOR

ACCESS TO DIAL EMERGENCY SERVICES.

Before operating this set,

please read these instructions carefully.

DIGITAL CORDLESS

TELEPHONES

DECT1905

WITH SMS

MESSAGING

AND FULL

COLOUR

OPTIONAL HANDSET TO SUIT MODELS 

DECT 1915, DECT1955

Important note — emergency calls

The DECT 1905 must be registered to a base series

designed for making emergency calls when the mains

power fails. So you should make alternative

arrangements for access to Emergency Services.

(This means that you should also have a basic

phone that does not need mains power, connected

to your line so that you can make calls during a

power failure.)

If you need help …

Visit our websites for information;

Australia: www.uniden.com.au

Unpacking your DECT1905

In the box are:

■the cordless handset

■two rechargeable batteries and a battery

compartment cover for each handset

■

charger pod with separate mains power lead

and adaptor

Keep the packaging materials in a safe place in

case you later need to transport the unit.

Keep your sales (till) receipt, which is your

guarantee.

New Zealand: www.uniden.co.nz

(DECT 1915 or DECT1955) before use and is not

Read these notes first

Choosing

a site for the

charger pod

The charger pod(s) should be placed on a level surface,

in a position where:

■the mains adapter plug will reach an easily accessible

240-V

AC switched mains supply socket — never try

to lengthen the mains power cable

■it is not close to another telephone — this can cause

radio interference

■it is not close to a sink, bath or shower, or anywhere

else where it might get wet

■it is not close to other electrical equipment — fridges,

washing machines, microwave ovens, fluorescent

lights, TVs etc.

Radio signals

between

handset and

base unit

To use your handset and base unit together, you must

be able to establish a radio link between them. Be

aware that:

■Any large metal object — like a refrigerator, a mirror

or a filing cabinet — between the handset and the

base unit may block the radio signal.

■Other solid structures, like walls, may reduce the

signal strength.

Mains power

connection IMPORTANT — The DECT 1905 charger pod must be

used with the mains adapter supplied with the unit.

Using any other adapter will invalidate any approval

given to this apparatus.

Fit the rechargeable batteries in each handset

A+

–

. Fit the two batteries as shown,

making sure you match the and

ends to the markings in the

battery compartment

B. Fit the battery compartment

cover, sliding it into place

and pressing firmly to make

sure it is secure

Battery safety

—

DON’T use non-rechargeable

batteries in the handset they may

burst, causing damage. Use the

rechargeable batteries supplied.

1Plug the mains adapter into a240 VAC,

50 Hz mains socket, with the switch on

the socket set to OFF

Switch on at the mains socket

Choose a suitable site for the charger pod. See page 3.

See the note

on page 3

Installation and Set-up

Installation and set-up

4Charge the batteries for 15 hours

The battery charge level symbol should

increase by one bar every half hour when

you’re charging an empty battery. If you

think that the symbol isn’t showing the

correct battery charge level, remove and

refit the batteries.

Keeping the batteries charged

When you don’t need to use the

handset (for example, overnight or

when you go out), replace it on the

base unit or charger pod, to keep the

batteries charged.

Whenever the battery charge level

symbol shows ‘nearly empty’( ),

place the handset on the base unit or

charger pod to charge the batteries.

Before you use the handset for the first time,

it’s important to charge the batteries fully.

The handset ‘beeps’ when it’s correctly in

position on the charging cradle.

Leave the handset on the charging cradle

for 15 hours.

Battery charge

level symbol

The Charge

light comes on.

Before you start

Electrical

safety ■DON’T let the base unit or charger pod get wet.

Electrical equipment can cause serious injury if used

while you are wet or standing in water.

■If the base unit or charger pod ever falls into water,

DON’T retrieve it until you have unplugged the power

lead from the mains and the telephone line plug from

the telephone socket (base unit only); then pull it out by

the unplugged cables.

■

NEVER use your DECT 1905 outdoors during a

thunderstorm — unplug the base unit from the

telephone line and the mains socket when there are

storms in your area. Damage caused by lightning is not

covered by the guarantee.

Interference If the sound quality gets worse as you move around

while on a call, this is probably caused by interference

between the handset and the base unit, perhaps

because you are too near to another phone or other

electrical equipment.

Move to a different position to clear the interference.

If you do not move, your call may be cut off.

!Radio interference in the environment may occasionally

cause a short break in the link between the handset

and the base unit while you are on a call. The handset’s

display may briefly show No Base Found until the link

is restored.

‘Out of range’

warning If you hear a warning tone during a call, and/or the

sound in the earpiece becomes faint or distorted, you

may be going out of range of the base unit. Move

nearer to the base unit within 20 seconds, until the

tone stops. Otherwise, your call may be cut off.

BASIC USE

Handset registration

!You must register the DECT 1905 handset to a

compatible base (DECT 1915 or DECT1955 series base)

before use.

To check whether a handset is already registered, make

sure mains power to the base unit is switched on

and the handset is within range. The handset’s display

should show its name (default )

and number.

If the display constantly shows No base found, you

need to register the handset.

Each handset can be registered to up to four base

units, which have numbers 1 to 4.

To re-register

or to register a

new handset

1 On the base unit, press and hold the

FIND HS button until you hear

Registration tone (repeated ‘beeps’)

You now have 60 seconds to register the

handset.

2On the handset, press the right Soft button

[Menu], then press the or button to

scroll to Handset

3Press the right Soft button [OK]

4Press the or button to scroll to Register,

then press the right Soft button [OK]

uThe display shows a list of base units. If any

of these numbers has a tick next to it, the

handset is already registered to that base unit.

5Move the highlight to BASE: 1 then press the

right Soft button [OK]

uThe display shows Base-PIN:

6Key in the base unit’s PIN code (default 0000)

If the base unit’s PIN code has been changed

from 0000 (see your base unit's User Guide), you’ll

need to know the current PIN code.

Handset

find hs

7Press the right Soft button [OK]

uThe display may flash Register for a few

moments, while the handset searches for a

base unit. It then shows a list of handset

numbers for the base unit.

8Key in a free handset number (optional) and

press the right Soft button [OK]

(If you don’t key in a number, the base will

select one automatically.)

uIf registration is successful, the display

returns to standby mode.

To register

to an extra

base unit

◗Follow the steps as for re-registering, but at step 5,

move the highlight to a free base unit number (one

without a tick)

To de-register

a handset You may need to do this in order to replace a

faulty handset. Using any registered handset:

1Press the right Soft button [Menu], then

press the or button to scroll to Base

2Press the right Soft button [OK], then press

the or button to scroll to De-register

3Press the right Soft button [OK]

uThe display shows Base-PIN:

4Key in the base unit’s PIN code (default

0000) and press the right Soft button [OK]

uThe display shows a list of the handsets

registered to the base unit.

5Key in a handset number

uThe display shows De-register forafew

moments.When the handset has been de-

registered, the display goes back to standby

mode.

Handset registration

To select a

base unit If your handset is registered to more than one

base unit, it will automatically select the one

with which it can best set up a radio link

(usually the nearest one). Or you can select a

base unit manually.

You don’t need this function if you have

only one base unit.

1Press the right Soft button [Menu], then

press the or button to scroll to

Handset

2Press the right Soft button [OK]

3Press the or button to scroll to

Select Base, then press the right Soft

button [OK]

uThe display shows a list of base units. The

currently selected base unit (or Best Base for

automatic selection), has a tick next to it.

4Move the highlight to the base unit number

you want, or to Best Base, then press the

right Soft button [OK]

uThe display may show No base found for a

few moments, then it should return to standby

mode. If it continues to show No base found,

you’ll need to select a different base unit, or

Best Base for automatic selection.

!We recommend that you leave this setting at

Best Base (the default) if you want your handset

to work with more than one base unit.

Handset registration

To register to

a different

brand of base

unit

Your DECT 1905 handset(s) can be registered to any

GAP-compatible base unit.

But we do not guarantee that all features or display

messages will be available using other manufacturers’

equipment.

1Follow the instructions in the base unit’s User Guide to

put the base unit into registration mode.

2Follow the instructions to register the handset (Steps 2

to 5 on page 7).

If you need to enter a PIN code for the base unit, refer

to the base unit’s User Guide.

If you have problems, visit our website at

www.uniden.com.au

Handset registration

www.uniden.co.nz

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Teléfono inalámbrico de Uniden

Uniden

Uniden D1660 Manual de usuario

Uniden

Uniden EXI 8965 Instrucciones de montaje

Uniden

Uniden XC3510 Manual de usuario

Uniden

Uniden EXT 1465 Manual de usuario

Uniden

Uniden TWX977 Series Manual de usuario

Uniden

Uniden EXP901 Manual de usuario

Uniden

Uniden DSS7815 +1 Series Manual de usuario

Uniden

Uniden EXAI3248 Series Manual de usuario

Uniden

Uniden EXT 1960 Manual de usuario

Uniden

Uniden XC 320 Manual de usuario

Uniden

Uniden EXI4246 - EXI 4246 Cordless Phone Guía del usuario

Uniden

Uniden EXAI398 Series Manual de usuario

Uniden

Uniden EXP 4240 Series Manual de usuario

Uniden

Uniden DECT2088 - DECT 2088 Cordless Phone Base... Manual de usuario

Uniden

Uniden EXAI2980 Series Manual de usuario

Uniden

Uniden DXI7286-2 Manual de lista de piezas

Uniden

Uniden EXP 8000 Series Manual de usuario

Uniden

Uniden EXP1240 Manual de usuario

Uniden

Uniden UIP 160P Series Manual de usuario

Uniden

Uniden SS E15 Series Manual de usuario

Uniden

Uniden EXI8560 - EXI 8560 Cordless Phone Guía del usuario

Uniden

Uniden DXI4560-2 Manual de usuario

Uniden

Uniden EXI2926 Manual de usuario

Uniden

Uniden 202 Manual de usuario

Manuales populares de Teléfono inalámbrico de otras marcas

3Com

3Com NBX Manual de usuario

Panasonic

Panasonic KX-TGK210HK Manual de usuario

Panasonic

Panasonic KX-TCA181EX Manual de usuario

BT FREESTYLE 3200 Manual de usuario

AT&T

AT&T CL84102 Manual de usuario

BREZZICNI

BREZZICNI CL-3622 Manual de usuario

Panasonic

Panasonic KX-TG1831NZ Manual de usuario

Panasonic

Panasonic KX-TG7301E Manual de usuario

Furuno

Furuno FM-4721 Manual de usuario

Sanyo

Sanyo CLT-J70 Manual de usuario

Amplicomms

Amplicomms BigTel 201 Manual de usuario

GE 26992 Manual de usuario

AT&T

AT&T E1812B Manual de usuario

Sanyo

Sanyo CLT-670 Manual de usuario

GE 15432970 Manual de usuario

Curtis

Curtis TC595 Manual de usuario

Gigaset

Gigaset Gigaset 3000 Micro Manual de usuario

Poly

Poly VVX D230 Guía de configuración