Uniden DECT1480-2 Manual de usuario

DECT1480 base

with answering

system and

cordless

handset

Battery

cover

Accessory handset

and charger

If you purchased

model number:

You should

have:

DECT1480-2 1 of each

DECT1480-3 2 of each

DECT1480-4 3 of each

DECT1480-5 4 of each

DECT1480-6 5 of each

You will also nd:

Not pictured:

Rechargeable battery

(BT-1007)

AC adapter (PS-0035)

Telephone cord

If any items are missing or damaged, contact our Customer Care Line

immediately. Never use damaged products!

Need help? Get answers 24/7 at our website: www.uniden.com.

If You... Contact Uniden’s... Phone Number

have a question or problem Customer Care Line* 817-858-2929 or

800-297-1023

need a replacement part or an

accessory Parts Department* 800-554-3988

need special assistance due to

a disability Accessibility Help Line 800-874-9314

(voice or TTY)

* During regular business hours, Central Standard Time; see our website for

detailed business hours.



DECT1480 Series User's Guide

What's in the box?

Not pictured:

Rechargeable

battery (BT-1007)

Battery cover

AC adapter

(PS-0035)

Ft. Worth, Texas UNZZ01107BZ(0)



When using your telephone equipment, basic safety precautions

should always be followed to reduce the risk of fire, electric shock and

injury to persons, including the following:

This unit is NOT waterproof. DO NOT expose this unit to rain or

moisture.

Do not use this product near water, for example, near a bath tub,

wash bowl, kitchen sink or laundry tub, in a wet basement or near a

swimming pool.

Avoid using a telephone (other than a cordless type) during an

electrical storm. There may be a remote risk of electric shock from

lightning.

Do not use the telephone to report a gas leak in the vicinity of the

leak.

Use only the power cord and batteries indicated in this manual. Do

not dispose of batteries in a fire. They may explode. Check with local

codes for possible special disposal instructions.

Do not place the handset in any charging cradle without the battery

installed and the battery cover securely in place.



What’s in the manual?

............................ 3

Installing Your Phone.................. 3

Geng to Know Your Phone ...... 5

Using the Menu .......................... 8

 ...................... 10

Basics ........................................ 10

Using the Phonebook ............... 12

Finding a Lost Handset.............. 13

............... 13

Chain Dialing............................. 13

Mulhandset Features ............. 13

Voice Message Nocaon ...... 15

..... 15

Answering System Opons

(Ans. Setup)............................ 15

Accessing the Answering

System.................................... 16

Personalizing the Greeng........ 17

Geng Your Messages ............. 18

Using the System While You're

Away from Home ................... 19

 .............. 20

Solving Problems ...................... 20

AC Adapter and Baery

Informaon ............................ 23

Compliance Informaon........... 24

1-Year Limited Warranty .......... 27









product.

For more details, see the Important Information section.





Charge the Baery

Unpack all handsets, battery packs,

and battery covers. If you need to

remove a battery cover, press in on

the notch and slide the cover down

and off.

Line up the battery connector with the jack inside the handset.

(The battery connector will only fit one way.)

Push the connector in until it clicks into place; tug gently on the

wires to make sure the battery pack is securely connected.

Replace the battery cover and slide it into place.

Connect the AC adapters to the

AC IN 8V

jacks on the base and on

each charger. Set the plugs into the notches.

Plug the other end of the adapters into standard 120V AC outlets.

Place one handset in the base and the other(s) in the charger(s)

with the displays facing forward. The display on each handset

should light up; if it doesn’t, reseat the handset or try plugging the

AC adapter into a different outlet.



them.



Connect the Telephone Cord

Use the telephone cord to connect the

TEL LINE

jack on the base to a

standard telephone wall jack.

Test the Connecon

Pick up the handset from the cradle and press

Talk

. You should

hear a dial tone, and the display should say Talk.

If you don't hear a dial tone or the display says Check Tel Line, try

checking the connection between the base and the phone jack.

Make a quick test call. (Press

End

to hang up.)

If you keep hearing a dial tone, try changing to pulse dialing mode.

If there is a lot of noise, see page 21 for tips on avoiding

interference.

Test all your handsets the same way. If you can't get a dial tone, try

moving the handset closer to the base.

Changing from Tone to Pulse Dialing

Your phone communicates with the telephone network in two ways:

tone dialing or pulse dialing. Most telephone companies use tone

dialing. If your phone company uses pulse dialing, you will need to

change your phone’s dial mode.

From a handset, open the menu and select Global Setup. (See page

8 for details on using the menu.)

Select Dial Mode, then select Pulse. The phone sounds a

confirmation tone.

If you use pulse dialing and you need to send DTMF tones during a call

(if you're using an automated response system, for example), press

to temporarily switch to tone dialing. When the call ends, the phone

automatically returns to pulse dialing mode.





Parts of the handset

Microphone

Twelve-

key dial

pad

STATUS

Display

Charging

contacts

Earpiece

PHONEBOOK/

LEFT

SPEAKER

DOWN

CALLER ID/

RIGHT

REDIAL/

PAUSE

MESSAGES/

MUTE

CLEAR/

INTERCOM MENU/

SELECT

END

TALK/

FLASH

Parts of the base

REV DOWN FWD

Charging

contacts

DELETE

PLAY/

STOP

ANSWERING

SYSTEM

STATUS

ON/OFF FIND

Base keys/LEDs and how they work

 What it does

Up (+)

In standby: increase the ringer volume.

While a message is playing: increase the speaker volume.

down (–)

In standby: decrease the ringer volume.

While a message is playing: decrease the speaker volume.

Fwd ( )

While a message is playing: skip to the next message.-

REV ( )

While playing messages: for the first 2 seconds, go to

the previous message; after that: go to the start of the

current message.

play/sTop

( )

In standby: start playing messages.

While a message is playing: stop playing messages.

If the phone is ringing: mute the ringer for this call only.

on / oFF

In standby: turn the answering system on or off.-

dElETE

( )

While a message is playing: delete this message.

In standby: delete all messages.

Find

In standby: page all handsets.-

LED What it means

play/sTop

On: a message is playing.

Blinking: there are new messages.

sTaTUs

On: the answering machine is on.

Off: the answering machine is off.

Blinking: the base is paging all handsets.

Handset keys/LEDs and how they work

 What it does

ClEaR/

inTERCom

In standby: start an intercom call.

During a call: put the call on hold and start a call

transfer to another handset.

While entering text: delete one character, or press

and hold to delete all the characters.

Talk/Flash

In standby: start a telephone call (get a dial tone).

During a call: switch to a waiting call.

 What it does

End

During a call: hang up.

In the menu or any list: exit and go to standby.

mEnU/sElECT

In standby: open the menu.

In the menu or any list: select the highlighted item.

Up ( )

In standby: increase the ringer volume.

During a call: increase the audio volume.

In any menu or list: move the cursor up one line.

down ( )

In standby: decrease the ringer volume.

During a call: decrease the audio volume.

In any menu or list: move the cursor down one line.

phonEbook/

lEFT ( )

In standby or during a call: open the phonebook.

In the menu: go back to the previous screen.

During text entry: move the cursor to the left.

CallER id/

RighT ( )

In standby or during a call: open the Caller ID list.

During text entry: move the cursor to the right.

REdial/

paUsE

In standby: open the redial list.

While entering a phone number: insert a 2-second

pause.

mEssagEs/

mUTE ( )

In standby: access your answering system.

During a call: mute the microphone.

If the phone is ringing: mute the ringer for this call

only.

spEakER ( )

Switch a normal call to the speakerphone (& back).-

LED What it means

sTaTUs

On: the battery is charging.

Blinking: there are new messages.

Reading the Display

This table shows possible status icons and what they mean. Since the

icons appear based on what you're doing with the phone, you won't

ever see all of these icons at the same time.

Icon What it means

The ringer is turned off and will not ring for new calls.

You have a voice message waiting.

Privacy Mode is on: no other handset can join the call.

The speakerphone is on.

The microphone is muted; the caller can't hear you.

T-coil mode is on (see page 21).

The battery is 1) fully charged, 2) half charged, 3) getting

low, or 4) empty.

[Aa] [aA] Enter 1) capital or 2) lower case letters (see page 9).



If you open the

menu during a call,

use

lEFT

to back out

of the menu without

hanging up.

If you don't press

any keys for about

thirty seconds, the

handset exits the

menu.

Handset Setup

You can change these settings separately for each handset.

T-coil Turn on T-coil mode to reduce noise on some hearing

aids (for more details, see page 21).

Ringer Tones

Choose this handset's ring tone. As you highlight each

ring tone, the phone plays a sample. When you hear

the tone you want, press

mEnU/sElECT



Handset Setup

Ans. Setup

Day & Time

To open the

menu, press

MENU/SELECT.Press MENU/SELECT

to choose the

highlighted option

press END

to exit the

To go back a

screen, press

PHONEBOOK/LEFT

The cursor

shows the

highlighted

option.

To move the

cursor, use

UP & DOWN.

T-coil

Ringer Tones

Handset Setup

Ans. Setup

Day & Time

To open the

menu, press

MENU/SELECT.Press MENU/SELECT

to choose the

highlighted option

press END

to exit the

To go back a

screen, press

PHONEBOOK/LEFT

The cursor

shows the

highlighted

option.

To move the

cursor, use

UP & DOWN.

T-coil

Ringer Tones

AutoTalk Have this handset answer a call when you pick it up

from the cradle (without pressing any buttons).

Any Key

Answer

Have this handset answer a call when you press any

key on the 12-key dialpad.

Banner Change the name used on the handset's display.

Handset

Language Change the display language.

Key Touch Tone Have the keypad sound a tone when you press a key.

Ans Setup

Refer to page 15 for details on setting up your answering system.

Day & Time

Use this menu to set the clock manually. (If you have Caller ID, the

phone sets the day and time from the CID data.) Select the day of week,

then use the number keypad to enter the hour and minutes in HHMM

format (e.g., enter 0345 for 3:45). Then, select AM or PM.

Global Setup

The settings on this menu affect all handsets. Only one handset at a

time can change these menu options.

Dial Mode Change the way your phone communicates with the

telephone network (see page 4).

Set Line Mode Do not change this setting unless instructed to by

customer service.

VMWI Reset Reset your Visual Message Waiting Indicator to

bring it back in sync with your voice mail service.

Entering Text on Your Phone

Use the 12-key dial pad when you want to enter text into your phone

(a name in the phonebook, the handset banner, etc.).

The phone defaults to a capital letter for the first letter and any

letter after a space; otherwise, it uses small letters.



To switch to all capital letters, press

The phone defaults to all

capital letters first (e. g. ABCabc2) until you enter a blank space or

press

again. (Any time you want to change case, just press

If two letters in a row use the same number key, enter the first letter

and wait a few seconds (or press

RighT

); the cursor will move to the

next space. Enter the next letter.

Press

to enter a blank space.

To change a letter, move the cursor to that letter and press

ClEaR

erase the letter. Then, enter the new one.

To erase the entire entry, press and hold

ClEaR

Press

to cycle through all available symbols and punctuation.



Basics

To... Earpiece 

make a call: Dial the

number, then Press

Talk/Flash

. Press

spEakER

answer a call Press

Talk/Flash

. Press

spEakER

hang up Press

End

or put the handset in the cradle.

switch between the

speaker & earpiece Press

spEakER

mute the microphone

during a call

Press

mEssagEs/mUTE

. Press again to turn

the microphone back on.

put a call on hold Press

ClEaR/inTERCom

. After 5 minutes on

hold, the call will be disconnected.

return to a call on hold Press

Talk/Flash

. Press

spEakER

mute the ringer for this

call only

While the phone is ringing, press

mEssagEs/

mUTE

Changing the Volume

You can set speaker volume levels separately for the base and each

handset. You can also set the earpiece volume on each handset.

Anytime you are listening to a speaker or earpiece, press

increase the volume and

down

to decrease it.



Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Teléfono inalámbrico de Uniden

Uniden

Uniden OCT4960-2 Manual de usuario

Uniden

Uniden EXP91 Manual de usuario

Uniden

Uniden DCX300 - DCX 300 Cordless Extension Handset Manual de usuario

Uniden

Uniden DECT3080-3 - DECT Cordless Phone Manual de usuario

Uniden

Uniden TRU9380 Series Manual de servicio

Uniden

Uniden EXAI 398 Series Manual de usuario

Uniden

Uniden BLUETOOTH XDECT R035BT Manual de usuario

Uniden

Uniden EWCI 936 Series Manual de usuario

Uniden

Uniden EXP 8000 Series Manual de usuario

Uniden

Uniden ANA 9310 Manual de usuario

Uniden

Uniden WDECT2315+2 Manual de usuario

Uniden

Uniden EXP91 Manual de usuario

Uniden

Uniden DECT1560 Series Manual de usuario

Uniden

Uniden EXT1265 Manual de usuario

Uniden

Uniden 4541 Manual de usuario

Uniden

Uniden EXI960 Manual de usuario

Uniden

Uniden EXP 7900 Series Manual de servicio

Uniden

Uniden DXAI7288-2 Manual de usuario

Uniden

Uniden DCT738 Series Manual de usuario

Uniden

Uniden EWCI936 Manual de servicio

Uniden

Uniden DX15686 Series Manual de usuario

Uniden

Uniden CXA 15698 Manual de usuario

Uniden

Uniden DECT1905 Manual de usuario

Uniden

Uniden TRU9465 Series Manual de usuario

Manuales populares de Teléfono inalámbrico de otras marcas

3Com

3Com NBX Manual de usuario

Panasonic

Panasonic KX-TGK210HK Manual de usuario

Panasonic

Panasonic KX-TCA181EX Manual de usuario

BT FREESTYLE 3200 Manual de usuario

AT&T

AT&T CL84102 Manual de usuario

BREZZICNI

BREZZICNI CL-3622 Manual de usuario

Panasonic

Panasonic KX-TG1831NZ Manual de usuario

Panasonic

Panasonic KX-TG7301E Manual de usuario

Furuno

Furuno FM-4721 Manual de usuario

Sanyo

Sanyo CLT-J70 Manual de usuario

Amplicomms

Amplicomms BigTel 201 Manual de usuario

GE 26992 Manual de usuario

AT&T

AT&T E1812B Manual de usuario

Sanyo

Sanyo CLT-670 Manual de usuario

GE 15432970 Manual de usuario

Curtis

Curtis TC595 Manual de usuario

Gigaset

Gigaset Gigaset 3000 Micro Manual de usuario

Poly

Poly VVX D230 Guía de configuración