Uncaged Ergonomics KT1 Guía de referencia rápida
www.UncagedErgonomics.com
ASSEMBLY & OPERATING INSTRUCTIONS:
KT1
Adjustable Height &
Angle Keyboard Tray
IMPORTANT: Before using your KT1:
Read and clearly understand the contents of this manual
Understand how to adjust KT1correctly
Practice adjusting KT1with nothing on it.
KT1allows you to easily adjust the height & angle of your keyboard to optimize your typing posture.
IMPORTANT: BEFORE using KT1or placing a keyboard & mouse on KT1, practice adjusting KT1’s height & angle.
1
A B C
D
Have Questions? Need Help?
Out A+ customer support team is here to help:
EMAIL: hello@UncagedErgonomics.com
PHONE: 240-583-0517
2
A
2. Align the Rail (A) with the edge of your desk.
3
3. Use 6Escrews to connect the Rail (A) to the bottom
of your desk.
E
G
8 Black M6 Nuts
E
6 Silver M6x16 Screws H
8 Black M6x14 Screws
1. Remove the ARM (B) from the Rail (A).
A. Remove two Stopper Screws from the front edge of the Rail (A).
B. Slide the ARM (B) off of the Rail (A)
C. Re-install the two Stopper Screws after completing the installation.
1
A
B
Stopper Screws
www.UncagedErgonomics.com
ASSEMBLY & OPERATING INSTRUCTIONS:
KT1
Adjustable Height &
Angle Keyboard Tray
2
6
6. The Mouse Pad (D) attaches to the right or left side of the
Keyboard Tray (C). Release the thumb screw on the attachment to
move the Mouse Pad closer to or farther away from the Keyboard tray.
D
C
7
7. Press down to tilt the Mouse Pad and adjust its’ angle.
If the mouse pad is too loose, tighten
the 2 screws on the mouse pad mounting bracket.
9
9. KT1 is adjustable in height and angle.
Release the lever (8A), adjust to your desired position,
and lock the lever in place.
8
8. The Keyboard Tray slides in/out by pushing/pulling.
8A.To adjust the Keyboard Tray’s angle, release the lever under
the keyboard tray.
8A
G
H
4. Attach the Keyboard Panel (C) to the mounting panel with
4 H Screws & 4 G nuts.
45
5. Connect the metal Mouse Pad Bracket to the keyboard tray
using 2 H Screws & 2 G Nuts.
4A. Connect the Mouse Pad to the Mouse Pad Bracket
using 2 H Screws & 2 G Nuts.
4A
G
H
Otros manuales de Accesorios de computadora de Uncaged Ergonomics
