UltraLite ALS Turbo Manual de usuario

2®

TABLE OF CONTENTS

Welcome.......................................................................3

Operational Safety ....................................................4

UltraLite Features ......................................................5

Operating Instructions ............................................7

 •UltraLiteALS®Assembly...............................7

 •UltraLiteALS®Operation..............................8

 •UltraLiteALS®Disassembly .........................9

Battery Pack Charger............................................. 10

Care and Cleaning.................................................. 11

Troubleshooting ..................................................... 12

Operating Specications ..................................... 13

Warranty .................................................................... 14

AdditionalAccessories ......................................... 15

OPERATOR’SMANUAL

Welcome

Thank you for purchasing the UltraLite ALS®. Please take a

moment to inspect the shipment to make sure the following

parts are included with your Kit:

Basic Kit (200-00110)

1 UltraLite ALS®

1 BMT™TurboHead Assembly

1 Power Adapter Pack

1 Power Supply

1 Pair Amber Glasses

1 Vehicle Power Supply

20 ft. Extension Cord

Basic Plus Kit (200-00114)

1 Basic Kit

1 Battery Charger

1 Battery Pack (3)

Complete Kit (200-00111)

1 Basic Plus Kit

1 UV Magnum Head

1 GreenTurbo Head

1 Red Turbo Head

1 Yellow Turbo Head

1 Red Glasses

1 Yellow Glasses

1 Glasses Bag

If any parts are damages or missing upon arrival, please

contactanauthorizedUltraLiteALS®representative.

Before operating the UltraLite ALS, please read these

instructions and familiarize yourself with the UltraLite ALS

and its features.

U.S. Patents #6,954,270; #7,252,678; #7,267,457; #7,283,230

Basic DVSA Kit, UV (200-00007)

Basic DVSA Kit, BMT™ Turbo (200-00108)

1 UltraLite ALS® Handle

1 UV Magnum Head*

1 Power Supply

1 Battery Charger

3 Battery Packs

1 Pair Amber Glasses w/ Bag

1 UltraLite ALS® Case w/ Foam Set

Complete DVSA Turbo Kit, UV (200-00109)

1 Basic DVSA Kit, UV

1 BMT™Turbo Head

1 White Turbo Head

* BMT™Turbo Head

(Item #200-0108) can

be substituted

OPERATIONAL SAFETY

The UltraLite ALS® incorporates solid-state emitters to

generate the wavelengths required for quality forensic

illumination. The output intensity of these components is

strong enough to present the risk of injury to eye and skin

tissue.

DO NOT POINT THE UNIT

DIRECTLY AT THE EYES OR SKIN!

Use only accessories and power sources that are supplied

withanddesignedspecicallyfortheUltraLite®.Donotallow

moisturetocollectonorenterintotheunit.Donotimmerse.

If the unit is used in humid environments, store in a warm, dry

placebetweenusetoallowmoisturetoevaporate.

ULTRALITE ALS® FEATURES

UltraLite ALS®

Battery Pack Charger

On/O

Button

Charging

Indicators

Battery

Docks

Charger

Power

Indicator

Power Input

Jack

1/4-20Tripod

Mount

Low Battery

Indicator

Power Level

Indicators

Power Setting

Button

OPERATOR’SMANUAL

HeadAssembly

Battery Pack

PowerAdapterPack

LIGHTOUTPUTSPECIFICATIONS(mW)

Head Designation 1/4 Power 1/2 Power 3/4 Power Full Power

UV (400 nM) 65 125 185 250

BMT 460 1030 1550 2110

Green 190 410 605 730

Yellow 75 190 295 400

Red 270 610 950 1325

Infrared (IR) 160 370 575 805

White 280 630 945 1275

1. UltraLite ALS® Assembly

a.)AttachthedesiredHeadAssemblytothe 

 UltraLitebody.Inserttheheadinastraightand 

slow manner to avoid damaging the contact

pins. Hold the head against the handle, and

rotate the locking ring on the handle until it is

 hand-tight.DO NOT TWIST THE HEAD.

DO NOT OVER TIGHTEN.

b.) Inserteitherabatterypackorthepower

 adapterpackintothebottomofthehandle.

For the power adapter pack, plug in the jack

from either the wall or the car power supply

 intothebottomofthepack.

Head

WhenmountingtheHeadAssemblytothe

UltraLiteALS®,twisttheLockingRingonly.

DON’TTWISTTHEHEAD!

Locking Ring

OPERATOR’SMANUAL

OPERATING INSTRUCTIONS

2. UltraLite ALS® Operation

Thisunit featuresanenergyconserving“sleepmode”.After

ve minutes of inactivity, the unit will automatically shut o

the indicator lights and enter this mode.

a.) If the unit is in sleep mode, press the On/O

 buttononceto“wakeup”theunit.

b.)PresstheOn/Obuttononcetoactivatethelight.

c.)PressthePowerSettingbuttontoincrease

the power output to the desired setting. The

power increases from setting 1, to 2, to 3, to 4,

 thencyclesbackto1.Thegreenlightson

the neck of the unit indicate the power setting

that is currently in use.

d.)PresstheOn/Obuttontodeactivatethelight.

Note: The yellow light on the neck will illuminate when the battery pack has

20% of its full charge left. Actual time remaining will vary, depending on which

Head Assembly is in use.

3. Disassembly

a.) To remove the head, rotate the locking ring

 onthehandleuntiltheheadbecomesloose. 

Pull the head straight away from the handle.

b.) Toremovethepowerorbatterypack,

 squeezebothtabsonthesidesoftheitem,then

pull straight out.

LEDHEAD WAVELENGTH(nM) EVIDENCE GLASSES

BMT™ 450 nM 99.5% Of All Evidence Amber

UV 400 nM Body Fluids, Bite Marks

Bruise Evidence

Amber

Red

Yellow

GREEN 525 nM Trace Evidence

Fingerprints, Fibers

Amber

Red

YELLOW 590 nM Fingerprints, Fibers

Altered Documents

Amber

Red

RED 630 nM Fibers, Altered Documents Amber

INFRARED (IR) 850 nM

Altered Documents, cleaning

solvents, fresh paint, and

explosive residues

Infrared detection cameras and

other devices

WHITE

Full Spectrum

400-750 nM

6500 kalvin

General crime scene search,

oblique lighting; hair, ber &

ngerprints

None or Yellow forensic goggles

and lters

WhenmountingtheHeadAssemblytotheUltraLiteALS®,

twisttheLockingRingonly.DON’TTWISTTHEHEAD!

Head

Locking Ring

OPERATOR’SMANUAL

The battery pack charger features a logic circuit that will

determine if a battery pack is in place and if it needs to

be charged. If two battery packs are in pace and both

need charging, the unit will fully charge both batteries

simultaneously. If all packs in the unit are fully charged, it will

shutountilthechargefallsbelowfull.DO NOT place the

powerpackadapterinthebatterycharger.

1. Assembly

a.) Insert the cord jack of either the wall power

supply or car power supply into the side of the

charger.

b.)Insertabatterypackintooneofthebattery

 docks.Makesurethebatteryiscompletely

inserted and snaps in place.

2. Operation

Each row of colored lights indicates the amount of charge

eachbatterycurrentlyhas,relativetoafullcharge.

BATTERY PACK CHARGER

Tabla de contenidos

Otros manuales de Luz de trabajo de UltraLite

UltraLite

UltraLite DIFFUSION 200 DYNAMIC WHITE Manual de usuario

Manuales populares de Luz de trabajo de otras marcas

ANSMANN

ANSMANN POWERLIGHT 5.1 Manual de usuario

RTRMAX

RTRMAX RTX1868 Manual de usuario

FeinTech

FeinTech LAL00220 Manual de usuario

Bunker Hill Security

Bunker Hill Security 64735 Manual de usuario

Goobay

Goobay 30450 Manual de usuario

REV Ritter

REV Ritter SPOT Manual de usuario

Ignition

Ignition Stagepix Line 100 IP Manual de usuario

SCANGRIP

SCANGRIP DUO CONNECT Manual de usuario

Bosch

Bosch GLI 18 V Manual de usuario

Bayco

Bayco SL-1514 Manual de usuario

EUFAB

EUFAB SMD LED 8+1 Manual de usuario

DeWalt

DeWalt DCL510 Manual de usuario

PowerSmith

PowerSmith PWLD080T Manual de usuario

MaxLite

MaxLite 73683 Manual de usuario

Heitronic

Heitronic Trend 27867 Manual de usuario

Monzana

Monzana Gore MZCL10 Manual de usuario

EINHELL

EINHELL TE-CL 18/2000 LiAC Manual de usuario

Bayco

Bayco NIGHTSTICK Dual-Light Xtreme Lumens... Manual de usuario