Ultra Power B6 mini Manual de usuario

UP-B6 mini: 60W, 6.0A Multi Charger

INSTRUCTION MANUAL

B6 mini

Smart Charger

Warning and Safety Notes........................................................................2

Introduction...............................................................................................4

Specification..............................................................................................4

Special Features.......................................................................................6

Warning and Safety Notes........................................................................9

Lithium Battery Connection Diagram......................................................11

Program Flow Chart................................................................................13

Lithium Battery(LiPo/LiFe/LiIon/LiHV)Program.......................................14

Charging Lithium Battery at Balance Mode............................................14

Charging of Lithium Battery.....................................................................15

'Fast' Charging of Lithium Battery...........................................................16

'Storage' Control of Lithium Battery.........................................................17

Discharging Lithium Battery....................................................................18

Pb Battery Program.................................................................................19

Charging of Pb Battery...........................................................................19

Discharging of Pb Battery.......................................................................19

NiMH/NiCD Battery Program..................................................................20

Charging of NiMH/NiCD Battery.............................................................20

Charging NiMH/NiCD Battery in the Auto Charge Mode........................20

Charging NiMH/NiCD Battery in re-peak Charge Mode.........................21

Discharging of NiMH/NiCD Battery.........................................................21

Charge/Discharge & Discharge/Charge Cycle of NiMH/NiCD Battery....22

Battery Memory Set................................................................................23

Lithium Battery Meter..............................................................................25

System Set up.........................................................................................26

Various Information During the Process.................................................28

Warning and Error Message...................................................................29

Warranty and Service.............................................................................30

TABLE OF CONTENTS

These warnings and safety notes are particularly important. Please

follow the instructions for maximum safety; otherwise the charger and

the battery can be damaged or at worst it can cause a fire. Also read

the chapter before you begin.

Never leave the charger unsupervised when it is connected to its

power supply. If any malfunction is found, TERMINATE THE

PROCESS IMMEDIATELY and refer to the operation manual.

Keep the charger well away from dust, damp, rain, heat, direct

sunshine and vibration. Never drop it.

The allowable DC input voltage is 11-18V DC.

This charger and the battery should be put on a heat-resistant,

non-flammable and non-conductive surface. Never place them on

a car seat, carpet or similar surface. Keep all flammable volatile

materials away from the operating area.

Make sure you know the specifications of the battery to be

charged or discharged to ensure it meets the requirements of this

charger. If the program is set up incorrectly, the battery and

charger may be damaged. Fire or explosion can occur due to

overcharging. This warranty is not valid for any damage or

subsequent damage arising as a result of a misuse or failure to

observe the procedures outlined in this manual.

To avoid short circuiting between the charge lead, always connect

the charge cable to the charger first, then connect the battery.

Reverse the sequence when disconnecting.

Never attempt to charge or discharge the following types of

batteries:

A battery pack which consists of different types of cells (including

different manufacturers)

A battery that is already fully charged or just slightly discharged

Non-rechargeable batteries (pose an explosion hazard)

A faulty or damaged battery

A battery fitted with an integral charge circuit or a protection circuit.

WARNING AND SAFTEY NOTE

Batteries installed in a device or which are electrically linked to

other components

Batteries that are not expressly stated by the manufacturer to be

suitable for the currents the charger delivers during the charge

process

Please bear in mind the following points before commencing

charging:

Did you select the appropriate program suitable for the type of

battery you are charging?

Did you set up appropriate current for charging or discharging?

Have you checked the battery voltage? Lithium battery packs can

be wired in parallel and in series, i.e. a 2-cell pack can be 3.7V (in

parallel) or 7.4V (in series).

Have you checked that all connections are firm and secure? Make

sure there are no intermittent contacts at any point in the circuit.

Standard Battery Parameters

Be very careful to choose the correct voltage for different types of

battery otherwise you may cause damage to the batteries. Incorrect

settings could cause the cells to fire or explode.

WARNING AND SAFTEY NOTE

3.7V/cell

Nominal

Voltage

Min. Discharge

Voltage

Max Charge

Voltage

Storage

Voltage

Allowable

Fast Charge

3.7V/cell

4.2V/cell

3.8V/cell

≦1C

LiPo LiIon

3.6V/cell

4.1V/cell

≦1C

3.3V/cell

3.6V/cell

3.3V/cell

≦4C

LiFe

3.0-3.3V/cell 2.9-3.2V/cell 2.6-2.9V/cell

1.2V/cell

1.5V/cell

n/a

1C-2C

NiCd

1.2V/cell

1.5V/cell

n/a

1C-2C

MiMH

2.0V/cell

2.46V/cell

n/a

≦0.4C

0.1-1.1V/cell 0.1-1.1V/cell

1.8V/cell

LiHV

3.7V/cell

4.35V/cell

3.85V/cell

≦1C

3.1-3.4V/cell

Thank you for purchasing the B6 mini charger.This product is a rapid

charger with a high performance microprocessor and specialized

operating software. Please read this entire instruction manual completely

and attentively before using this product, as it covers a wide range of

information on operation and Safety.

INTRODUCTION

Input voltage DC 11.0-18.0V

Max. 60W

Max. 5W

0.1-6.0A

0.1~1.0A

2~6 series

1 - 15cells

2V～20V(1-10cells)

200mAh/cell

170g

103*80*34mm

Charge power

Discharge power

Charge current range

Discharge current range

LiPo/LiFe/LiIo/LiHV cell count

NiCd/NiMH battery cell count

Pb battery voltage

Current drain for balancing LiPo

Weight

Dimension

B6 mini Specification

INTRODUCTION

LCD display

XT60 Battery Port

• Scroll through

the main menu

• Stop any charge

Process

•Alter values

• See the status of individual

cells in balance charge mode

• Resume or Start

charge processes

• Confirm an action

Temp. Sensor

Balance Socket

DC Input

11-18V DC

PC Link

Optimized Operating Software

B6 mini features the AUTO function that set the feeding current during

the process of charging or discharging. Especially for lithium batteries, it

can prevent the overcharging which may lead to an explosion. It can

disconnect the circuit automatically and alarm once detecting any

malfunction. All the programs of this product were controlled through

two way linkage and communication, to achieve the maximum safety

and minimize the trouble. All the settings can be configured by users!

Internal Independent Lithium Battery Balancer

B6 mini employs an in dividual-cell-voltage balancer. It isn't necessary

to connect an external balancer for balance charging.

Balancing Individual Cells For Battery Discharging

During the process of discharging, B6 mini can monitor and balance

each cell of the battery individually. Error message will be indicated and

the process will be ended automatically if the voltage of any single one

cell is abnormal.

Adaptable to Various Type of Lithium Battery

B6 mini is adaptable to various types of lithium batteries,such as LiPo,

Lilon, LiFe and new generation of LiHV batteries.

Fast and Storage Mode of Lithium Battery

Purposes to charge lithium battery varies, 'fast' charge reduce the

duration of charging, whereas 'store' state can control the final voltage

of your battery, so as to store for a long time and protect useful time of

the battery.

Cyclic Charging/Discharging

1 to 5 cyclic and continuous process of charge>discharge or discharge

> charge is operable for battery refreshing and balancing to stimulate

the battery's activity.

SPECIAL FEATURES

Re-Peak Mode of NiMH/NiCD Battery

In re-peak charge mode, the charger can peak charge the battery

once, twice or three times in a row automatically. This is good for

making certain the battery is fully charged, and for checking how well

the battery receives fast charges.

Data Store/Load

The charger can store up to 10 different charge/discharge profiles for

your convenience. You can keep the data pertaining to program setting

of the battery of continuous charging or discharging. Users can call out

these data at any time without any special program setting.

Terminal Voltage Control(TVC)

The charger allows user to change the end voltage.

LiPo Battery Meter

The user can check battery's total voltage, the highest voltage, the

lowest voltage and each cell's voltage.

Maximum Safety

Delta-peak sensitivity for NiMH/NiCd battery: The automatic charge

termination program based on the principle of the Delta-peak voltage

detection. When the battery's voltage exceeds the threshold, the

process will be terminated automatically.

SPECIAL FEATURES

Automatic Charging Current Limit

You can set up the upper limit of the charging current when charging

your NiMH or NiCd battery, it is useful for the NiMH battery of low

impedance and capacity in the 'AUTO' charging mode.

Capacity Limit

The charging capacity is always calculated as the charging current

multiplied by time. If the charging capacity exceeds the limit, the

process will be terminated automatically when you set the maximum

value.

Temperature Threshold*

The battery's internal chemical reaction will cause the temperature of

the battery to rise. If the temperature limit is reached, the process will

be terminated.

*This function is available by connecting optional temperature probe,

which is not included in the package.

Processing Time Limit:

You can also limit the maximum process time to avoid any possible

defect.

SPECIAL FEATURES

Charging

During charge process, a specific quantity of electrical energy is fed

into the battery. The charge quantity is calculated by multiplying charge

current by charge time. The maximum permissible charge current

varies depending on the battery type or its performance, and can be

found in the information by the battery manufacturer. Only batteries

that are expressly stated to be capable of quickcharge are allowed to

be charged at rates higher than the standard charge current.

Connect the battery to the terminal of the charger: red is positive and

black is negative. Due to the difference between resistance of cable

and connector, the charger can not detect resistance of the battery

pack. The essential requirement for the charger to work properly is that

the charge lead should be of adequate conductor cross-section, and

high quality connectors which are normally goldplated should be fitted

to both ends.

Always refer to the manual by the battery manufacturer pertaining

to charging methods. Operate according to their recommended

charging current and charging time. lithium batteries, in particular,

should be charged strictly according to the manufacturer’s instruction.

Close attention should be paid to the connection of lithium batteries.

Do not attempt to disassemble the battery pack arbitrarily.

Please get highlighted that lithium battery packs can be wired in

parallel and in series. In the parallel connection, the battery's capacity

is calculated by multiplying single the battery's capacity by the number

of cells, bearing in mind that total voltage stays the same. If the voltage

is imbalanced, it may cause a fire or explosion. Lithium batteries are

recommended to charge in series.

WARNING AND SAFTEY NOTE

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cargador de baterías de Ultra Power

Ultra Power

Ultra Power UP200AC DUO Manual de usuario

Ultra Power

Ultra Power UP120AC DUO Manual de usuario

Ultra Power

Ultra Power UP-S6 Manual de usuario

Ultra Power

Ultra Power UP240AC DOU Manual de usuario

Ultra Power

Ultra Power UP200 Duo Manual de usuario

Ultra Power

Ultra Power UP600AC DUO Manual de usuario

Ultra Power

Ultra Power UP-S6 Manual de usuario

Ultra Power

Ultra Power UP-S4AC Manual de usuario

Ultra Power

Ultra Power UP610 Manual de usuario

Ultra Power

Ultra Power UP240AC Plus Manual de usuario

Ultra Power

Ultra Power UP1350W Touch Manual de usuario

Ultra Power

Ultra Power UP300AC Touch Manual de usuario

Ultra Power

Ultra Power UP-S6 Manual de usuario

Ultra Power

Ultra Power UP1200+ Manual de usuario

Ultra Power

Ultra Power UP400AC Duo Manual de usuario

Ultra Power

Ultra Power UP1200AC PLUS Manual de usuario

Ultra Power

Ultra Power UP616 Manual de usuario

Ultra Power

Ultra Power UP1200AC PLUS Manual de usuario

Manuales populares de Cargador de baterías de otras marcas

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Manual de usuario

Enelion

Enelion Vertica Manual de usuario

RCA

RCA CHU6 Manual de usuario

ANSMANN

ANSMANN ALCT 6/24-10 Manual de usuario

Hitachi

Hitachi UC 18YRSL Guía de solución de problemas

Olympus

Olympus B-20 LPC Manual de usuario

Exibel

Exibel ZH1708143 Manual de usuario

Lenmar

Lenmar Mach 1 Manual de usuario

CTEK

CTEK MXS 5.0 Manual de usuario

ABB

ABB HT842379 Manual de usuario

Nitecore

Nitecore Superb Charger SC4 Manual de usuario

Renogy

Renogy RBC2125DS-21W Manual de usuario

Braun

Braun BWC02M Manual de usuario

CTEK

CTEK MXS 3.6 Manual de usuario

Black & Decker

Black & Decker BDV090 Manual de usuario

Trinity

Trinity DPD Manual de usuario

Hulkman

Hulkman Sigma 1 Manual de usuario

IKEA

IKEA koppla Manual de usuario