UGEE Q6 Manual de usuario
Q6 Drawing Tablet
User Manual
Catalogue
01 Product
Overview------------------------------------------------------01
1.1 Product
Introduction---------------------------------------------------01
1.2 Product
Overview------------------------------------------------------01
1.3 How to Connect Your Phone for Use-------------------------------02
1.4 How to Connect to a Computer for Use---------------------------04
02 Driver
Introduction---------------------------------------------------05
2.1 Driver
Download-------------------------------------------------------05
2.2 Drive
Installation------------------------------------------------------06
2.3 Driver
Usage------------------------------------------------------------09
2.4 Drive
Uninstallation---------------------------------------------------20
03 Specification Parameters-----------------------------------------21
04
FAQs-------------------------------------------------------------------------
--22
1
01 Product Overview
1.1 Introduction
Thank you for choosing ugee Q6 drawing tablet. In order to help you better understand
and use this product, please read this manual carefully. This manual only shows how
to use it on Windows systems, but unless otherwise specified, the relevant
introduction is also applicable to Apple system users.
In addition, our goal is to continuously improve product quality and user experience.
We apologize for any changes in product specifications without prior notice.
1.2 Product Overview
①Mode switch knob: supports switch between 4 modes
------- Suitable for full-screen phones （20：9）
----- Suitable for non full-screen phones （16 ：9）
---- Suitable for tablets（16：10）
--- Other special devices with landscape displays （9：16）
Attention:
1）This knob switches up and down, please do not rotate left or right!
2）The device types corresponding to the four gears are recommended, and you can
choose the corresponding gear based on the ratio of your phone/tablet screen.
② Handwriting indicator light
③ Shortcut Keys
④ Work Area
⑤ USB-C Port
⑥ Pen Sleeve
⑦ USB-C to C Cable
⑧ Stylus
1.3 How to use it on phone/tablet
2
Step 1: Enter <Settings> on the phone/tablet，and turn on the "OTG" switch.
Attention:
Each terminal’s（phone/tablet）setting is different, and some terminal’s OTG
function is enabled by default, so you need to confirm it by yourself.
Step 2: Turn off the "screen automatic rotation function" of the phone/tablet.
Step 3: Connect to phone/tablet.
Take out the USB cable on the back of the drawing tablet, connect one end to the
drawing tablet (the USB-C port is on the top of the drawing tablet), and connect
another end to the phone/tablet. The phone/tablet and the drawing tablet should be
placed vertically.
Step 4: Mode switching
Swipe the mode switch knob up and down to switch to a mode suitable for your
phone/tablet.
Step 5: Open the painting software on phone/tablet and start painting!
Attention：
1) If the phone/tablet uses a Micro USB interface, it is necessary to first insert
the Micro USB OTG adapter into the phone/tablet before connecting it;
2) Only supports Android 6.0 and above systems, and harmony OS 1.0 and above systems.
If the version is too low, please upgrade your phone/tablet system first;
3) Please drawing when your phone/tablet with sufficient battery (>20%).
4）If your usage habit is to draw with your left hand, you can switch between left
and right hand modes by long pressing the K1 shortcut key for 5 seconds.
1.4 How to use it on computer
Step 1: Connect the drawing tablet to the computer using a USB cable.
3
Attention:
1) If the computer does not have a fully functional USB-C interface, a USB-A to C
cable needs to be prepared by yourself.
2) If a longer USB cable is required, it needs to be prepared by yourself.
Step 2: Download and Install Drivers.
Step 3: Check if there is pressure on the drawing tablet. （Open drawing software
such as Photoshop or Sai to test line pressure.）
Step 4: Start your creative journey!
4
02 Driver Introduction
2.1 Driver Download
Go to the ugee website (www.ugee.com) and download the driver for the appropriate
operating system based on the product model you purchased.
Notes:
Before installing the driver, turn off all antivirus and graphics software.
Uninstall drivers (if any) of other brands’ digital drawing tablets/monitors before
installation.
For optimal experience, restart your computer after installation is completed.
For the best performance for your device, we recommend you install the latest driver.
5
2.2 Drive Installation
2.2.1 Windows
Note: This driver is compatible with Windows 7 and above. After decompression, run
the 'exe' file as administrator and follow the prompts to complete the installation.
Windows driver installation interface Windows driver installation process
Windows driver installation complete
2.2.2 Mac OS
Note: This driver is compatible with Mac OS X 10.12 and above. After decompressing
and downloading the installation package, run the ". dmg" file in Mac OS and complete
the installation according to the following diagrams.
6
Step 1: Continue Step 2: Continue
Step 3: Accept Step 4: Install
Step 5: Enter password Step 6: Install driver
Step 7: Installation complete
7
2.2.3 Linux
Deb: Enter the command “sudo dpkg -i”. Drag the installation file into the window
and execute the command.
Rpm: Enter the command “sudo rpm -i”. Drag the installation file into the window
and execute the command.
Tag.gz: Unzip file. Enter command “sudo”. Drag “install.sh” into the window and
execute the command.
8
2.3 Driver Usage
Tips: Android phones/tablets, and Chromebooks are all in drive free mode.
2.3.1 Connect to Device
The driver will run automatically after being installed. If it does not run
automatically, go to the driver folder to run it manually.
Windows program path: Start→ugeeTablet
Mac program path: Application→UgeePenTablet→ugeeTablet
If the device is not connected or the connection fails, you will see the following
prompt. In this case, restart your computer or the driver to connect it again or
contact our service staff for support.
If the device is connected successfully, its product model will be displayed in the
lower right corner of the display, for example, Q6 as shown in the image.
You can connect up to three devices via the driver at the same time. Click the
drop-down menu to select device to activate. Customize the device's settings after
switching to that device. All changes made apply only to that device.
Otros manuales para Q6
1
Tabla de contenidos
Otros manuales de Tableta de UGEE
