UCTECH FT0365 Manual de usuario
- 1 -
FT0365 Professional WiFi Weather Station
User Manual
1. Introduction..........................................................................3
2. Warnings and Cautions........................................................3
3. Getting Started.....................................................................3
3.1 Parts List.........................................................................3
3.2 Recommend Tools.........................................................7
3.3 Sensor Assembly Set Up................................................7
3.3.1 Install Integrated Outdoor Sensor Battery................8
3.3.2 Wind Cup Installation.............................................10
3.3.3 Rain Gauge Installation..........................................12
3.3.4 Battery Installation ................................................13
3.3.5 Reset Integrated Outdoor Sensor .........................15
3.4 Display Console................................................16
3.4.1 Layout of Display Console.....................................16
3.4.2 Setup the Display Console ....................................17
3.4.3 Connect Sensors with Display Console.................18
3.5 Sensor Operation Verification.......................................19
3.6 WiFi Setup Guide.........................................................20
4. Sensors Pre-Installation.....................................................20
4.1 Test the Sensors Before Installation.............................20
4.2 Site Survey Before Installation......................................21
4.3 Best Practices for Wireless Communication.................21
5. Final Installation of Sensors...............................................23
5.1 Integrated outdoor Sensor Installation..........................23
6. Low Battery Icon................................................................28
7. Display Console Operation................................................28
7.1 Quick Display Mode......................................................28
- 2 -
7.2 Set (Program) Mode....................................................29
7.3 Sensor Search Mode................................................32
7.4 Max/Min Viewing and Reset Mode...............................32
7.5 Snooze Mode...............................................................34
7.6 Backlight Mode.............................................................34
8. Alarm Mode........................................................................35
8.1 Alarm Triggered............................................................35
8.2 View High/Low Alarm Value.........................................35
8.3 Setting the Alarms........................................................36
8.4 Alarm and Key Beeper ON/OFF...................................38
9. Optional Calibration Mode............................................38
9.1 Calibration of Temperature Mode.................................39
9.2 Calibration of Humidity Mode........................................40
9.3 Calibration of Sensors Mode........................................40
10. Other Features of Display Console..................................45
10.1 Weather Forecasting..................................................45
10.2 Weather Icons............................................................46
10.3 Moon Phase...............................................................47
10.4 Feels Like Temperature .............................................47
10.5 Pressure Threshold Setting........................................49
10.6 Restore Factory Default..............................................49
11. Maintenance....................................................................49
12. Trouble Shooting Guide...................................................53
13. Specification....................................................................56
- 3 -
1.Introduction
Thank you for your purchase of the FT0365 Professional WIFI
Wireless Weather Station. The following user guide provides
step by step instructions for installation, operation and
troubleshooting.
2.Warnings and Cautions
Warning: Any metal object may attract a lightning strike,
including your weather station mounting pole. Never install the
weather station in a storm.
Warning: Installing your weather station in a high location
may result in injury or death. Perform as much of the initial
check out and operation on the ground and inside a building or
home. Only install the weather station on a clear, dry day.
3.Getting Started
The FT0365 weather station consists of a display console, a
sensor array with Integrated Outdoor Sensor, and mounting
hardware.
3.1 Parts List
The weather station consists of the following parts (as
referenced in Figure 1 ).
- 4 -
QTY
Item
Image
1
Display Console
Frame Dimensions :
6.5X 5.32X 0.71inch
(165×135×18mm）
LCD Dimensions:
5.12 x 3.16inch(130×80mm)
1
(7-in-1) Design
Integrated Outdoor
Transmitter
Dimensions (LxHxW)：
330x120x270mm
1
Wind speed
Dimensions:
146 x 146 x 46mm
(Optional)
1
Filter screen
Dimensions:
88 x 59 x 45mm
- 5 -
QTY
Item
Image
4
Washer(Metal gasket)
4
Pole Mounting U-bolt Nuts
(M5)
2
U-Bolt (M5)
Dimensions: 2.4x2.4x0.2inch
(60x60x5mm)
1
L-shaped Stainless Steel
base
Dimensions: 3x1.6x0.6inch
(75x40x15mm)
1
Wrench (M5)
Dimensions: 2.6x0.8x0.08inch
(65x20x2mm)
- 6 -
QTY
Item
Image
1
Screwdriver (M3)
Dimensions: 0.4x3.5inch
(Φ10x90mm)
2
Wind Vane and wind Cup
mounting screws (Ø3)
Dimensions:
M2*6mm(0.23inch)
One is a spare part.
2
Wind Cup Waterproof rubber
plug
Dimensions: 0.16x0.12inch
(Φ4 x 3mm)
1
Manual
1
Power Adapter
- 7 -
QTY
Item
Image
1
Stainless Steel Mounting
Pole
Dimensions: Φ40 x 270mm
(Optional)
Figure 1
3.2 Recommend Tools
Precision screwdriver (for small Phillips screws)
Compass or GPS (for wind direction calibration)
Adjustable Wrench.
3.3 Sensor Assembly Set Up
Note: The outdoor sensor array must be powered and
updating before powering up the console, or the console will
stop scanning and connecting with the sensors.
The following illustration shows the full segment for
Thermo-Hygrometer，WIND,RAIN and UV INDEX sensor.
purposes only ,as shown in Figure 2.
- 8 -
Figure 2
3.3.1 Install wind speed
Push the wind speed into the shaft. as shown in Figure 3.
Tighten the set screw with as shown in Figure 4.
Insert white waterproof rubber at the top of the wind speed
Make sure the wind speed can spin freely.
- 9 -
Figure 3
- 10 -
Figure 4
Tabla de contenidos
Manuales populares de Estación meteorológica de otras marcas
National Geographic
National Geographic VA Colour RC Manual de usuario
Renkforce
Renkforce 1208067 Manual de usuario
Levenhuk
Levenhuk Discovery Report WA40 Manual de usuario
Instant Transmission
Instant Transmission MA 10410 Manual de usuario
Lutron Electronics
Lutron Electronics PHB-318 Manual de usuario
WAREMA
WAREMA EWFS Weather station eco Manual de usuario