Uclear HBC200 Manual de usuario
Helmet Communicator
User Manual
HBC200
®
EN 1
Welcome to HBC200
Helmet Communicator
User Manual
®
HBC200
control unit
Hi-fi
Stereo Speaker
Metal mounting
bracket
Velcro Pads
AC charger &
USB charging cable
User Manual
Removable metal
mounting bracket
Anti-slip
rubber patch
EN 2
Contents
Contents ----------------------------------------------------------------------- 1
Quick User Guide ----------------------------------------------------------- 3
Warnings and Safety Instructions --------------------------------------- 7
Features ----------------------------------------------------------------------- 9
Installation -------------------------------------------------------------------- 10
General Operations -------------------------------------------------------- 14
Mobile Phone Operations ------------------------------------------------ 16
Music Streaming Operations -------------------------------------------- 18
Intercom Operations ------------------------------------------------------ 19
Button Configurations Summary --------------------------------------- 25
Status Indicator Configurations Summary --------------------------- 26
Technical Data -------------------------------------------------------------- 27
Troubleshooting Operational Tips -------------------------------------- 28
Notices ------------------------------------------------------------------------ 29
EN 3
Quick User Guide
Your HBC200 at a glance
GENERAL FUNCTIONS
Before using your HBC200
Please charge it first!
Charge
Check Bluetooth phone capabilities before use.
To charge, use the provided charging cable by
connecting it either to a USB port or to the
adaptor provided. While charging, the status
indicator light will be red. Upon being fully charged,
the status indicator light will be blue.
Low Battery Indicator
You need to charge the helmet communicator
when the status indicator light blinks red twice
every 2 seconds with a beep every minute.
Install Speakers
Make sure the speaker wire is inserted into the
main unit. lnsert the speaker wire into the control
unit until you can no longer see the 3 ribs on the
speaker wire plug.
Status Indicator
Answer Button Up Button
Down Button
Also, make sure to register your product on
uclear-digital.com and ensure you have the
latest firmware update downloaded to enjoy
feature enhancements.
4
Quick User Guide
EN
Power On
Hold Answer for 2 seconds.
Power Off
Hold Answer for 5 seconds.
Volume Up
Press Up once per level.
Volume Down
Press Down once per level.
Reset
Press all 3 buttons
at the same time from
an ON position until
you see light go out.
*NOTE: The volumes for mobile phone, music and intercom functions are controlled separately.
EN 5
Quick User Guide
Pairing
Hold Up and Down together
for 2 seconds
MOBILEPHONE FUNCTIONS
Pairing your HBC200 with your mobile phone.
>Check Bluetooth phone capabilities
before use.
>Hold Up and Down buttons together
for 2 seconds. The status indicator
light will blink blue and red alternately.
>From your mobile phone Bluetooth
menu, search for ‘UCLEAR HBC200’.
>If your phone requires a password,
enter ‘0000’.
Answer Incoming Call
Use voice pickup, say ‘hello’ or ‘pickup’.
OR
Manually press Answer button once.
Reject/ End Incoming Call
Hold Answer button for 2 seconds.
Last Number Redial
Use voice pickup,
Hold Answer and Up button for 2 seconds
Voice Dial
Hold Answer and Down
button for 2 seconds.
3 Way Calling
To swap between 2 concurrent calls, press
the Answer button once.
EN 6
Quick User Guide
MUSIC STREAMING FUNCTION
*NOTE: For music Bluetooth adaptor you would need to pair the music Bluetooth adaptor
before using it with HBC200.
Pairing (for Music Bluetooth adaptor Only)
Hold Up and Down buttons together for 2 seconds.
Play Music
Press the Answer button 2 times.
Stop Music (Quick Mute)
Press the Answer button 1 time.
Backtrack
Press the Down button 2 times.
Initiate Conversation
Hold the Up button for 2 seconds.
Terminate Conversation
Hold the Down button for 2 seconds.
Intercom Pairing on First Unit
Press Answer and Down buttons
for approximately 3 seconds
Quickly release once the power light
comes on
Intercom Pairing on Subsequent unit
Press Answer and Up buttons
for 3 seconds
Quickly release once the power light
comes on.
Fast Forward
Press the Up button 2 times.
INTERCOM FUNCTIONS
Pairing your HBC200 to another HBC200, the control unit needs to be switched
off before performing the following steps (see page 20 of the manual for detail):
*NOTE: Pairing needs to be done once. should the same group of users be riding.
UCLEAR control units should be reset and paired again for any new configuration of riders.
EN 7
Warning and Safety Instructions
This manual uses the and icons to highlight certain instructions.
Below is an explanation of the icons.
> This icon highlights special instructions and precautions intended to avoid damage
to the system. Non-compliance may void the product warranty.
Attention
> Please read through the operating instructions to understand how to operate the
system, in particular the safety instructions.
Attention
> This icon provides precautions important to prevent injuries to the user.
Warning
Warning
> Please note that there are some countries that by law disallow the rider to set the
helmet communicator to a volume that prevents you from perceiving the
surrounding.
> Please note that in some countries the use of both speakers simultaneously is
authorized only out of public traffic conditions.
> Please check with the relevant authorities for local safety legislation before using
the helmet communicator on the road.
> Please learn how to use the buttons by looking into the mirror before using the
helmet communicator on the road.
> Please note that there are some countries that by law disallow the rider to set the
helmet communicator to a volume that prevents you from perceiving the
surrounding.
> Please note that in some countries the use of both speakers simultaneously is
authorized only out of public traffic conditions.
> Please check with the relevant authorities for local safety legislation before using
the helmet communicator on the road.
> Please learn how to use the buttons by looking into the mirror before using the
helmet communicator on the road.
EN 8
Warnings and Safety Instructions
> Prolonged exposure to loud sounds may lead to permanent hearing damage.
> Speaker volume is greater than 90 dB may lead to permanent hearing damage.
> Do not attempt to place an outgoing call through the mobile phone while riding on
the motorcycle at any point of time.
> Please do not use the helmet communicator in anyway that may distract
you or hinder your judgment while on the move. Never ever compromise your safety
and the safety of others.
> Charging and handling rechargeable battery products incorrectly may cause them
to overheat, catch fire or explode. To prevent this please follow the instructions below:
i) Never change the batteries yourself, always bring the device to an authorised
dealer to perform the replacement for you.
ii) When charging, use ONLY the charging cable provided or a replacement cable
from the dealer. Using similar, compatible or any other cables may lead
to permanent product damage and will void the product warranty.
> Never make any modifications to any part of the helmet communicator in
any way as it may cause the system to malfunction causing hurt to you.
> Do not modify your helmet to use with this system - it is not necessary to do so.
Attention
EN
9
Features
The helmet communicator has three main functions: to make mobile phone
calls, to listen to music and for intercom communication.
Mobile Phone Functions
• Bluetooth phone audio capabilities, HFP & HSP Profile.
• Voice activated call pick up.
Music Streaming Functions
• Bluetooth music streaming with hi-fi and stereo capabilities, A2DP Profile.
• Bluetooth Audio/Video Remote Control capability, AVRCP profile.
Intercom Functions
• Motorcycle to motorcycle or rider to passenger connection via two helmet
communicators up to 700m range.
Advanced Product Features
• Self adaptive intelligent noise cancellation algorithms ensure conversations on the
go are clear, even in noisy environments.
• Voice controlled incoming call answering.
• The weather resistant engineered design ensures the possibility of communication
regardless of weather conditions.
• The integrated microphone array technology allows you to communicate without
the hassle of using boom microphones.
Otros manuales para HBC200
1
Tabla de contenidos
Otros manuales de Teléfono móvil de Uclear
