UAZ HUNTER 315195 Manual de usuario
Ulyanovsk Automobile Plant PJSC
Motor Vehicles
UAZ-315195 and UAZ-315148
and Versions Thereof
Operating Manual
RE 05808600.133-2012
3rd Edition
2016
2
© Ulyanovsk Automobile Plant PJSC, 2016
The Manual contains the necessary rules for operation and
maintenance of the motor vehicles.
Please read carefully information given in this Manual. To
ensure the fault-free performance of the motor vehicle, please
perform all instructions for operation and maintenance specified
in it.
The maintenance of the motor vehicle can be performed by
one of the service stations recommended by the Manufacturer
or by the company, from which you have purchased the motor
vehicle. Service stations have all the necessary spare parts, sets of
special accessories and tools. All servicing of the motor vehicle
is performed by experienced specialists.
Due to continuous work on the improvement of the motor vehicle,
the construction may include modifications that are not described
in the present edition.
Have a great trip!
3
Chapter 1. GENERAL INFORMATION
The UAZ-315195 and UAZ-315148 motor vehicles (Fig. 1.1)
are light two-axle all-terrain vehicles, with 4WD and a hardtop.
The motor vehicles are designed to transport passengers and
cargo over all types of roads and terrain.
The motor vehicles, manufactured in version "U" per Category
1 of State Standard (GOST) 15150, are designed for operation
under ambient operating temperatures of -40 up to +40°C,
relative humidity of up to 75 % at +15°C, air dust content of
up to 1.0 g/m3and wind speed of up to 20 m/s including in the
regions located at absolute elevations of up to 3,000 m, with
corresponding reduction of propulsion dynamic performance
and fuel efficiency.
The motor vehicles, manufactured in version "T", are designed
for operation under ambient operating temperatures of -10 up
to +50°C, air relative humidity of up to 80 % at 27°C under
conditions specified above for the "U"-version motor vehicles.
The "plus" sign near the part (assembly) description means
that this part (assembly) shall be installed into the motor vehicles
depending on the configuration.
MOTOR VEHICLE MARKINGS
The vehicle identification number (Fig. 1.2) is embossed on
the name plate and on the horizontal flange of the upper panel
of the front bodywork (under the motor hood, on the right side).
The motor vehicle name plate (see Fig. 1.2) is located on the
center post of the aperture panel on the motor vehicle's right
side (in the rear side door opening).
The body number (see Fig. 1.2) is embossed on the horizontal
flange of the upper panel of the front bodywork (under the motor
hood, on the left).
The chassis number (see Fig. 1.2) is embossed on the right
side frame (in the rear part of the vehicle).
The engine identification number (Fig. 1.3)
is located on the
engine's cylinder block on the left side.
4
Fig. 1.1. Basic dimensions of UAZ-315195
and UAZ-315148 hardtop motor vehicles
(dimensions are given for reference)
5
Fig. 1.2. Vehicle markings:
1 — Vehicle Identification Number; 2 — body identification number; 3 —
chassis identification number; 4 — vehicle name plate; I — complete number
of Vehicle Type Approval (VTA); II — Vehicle Identification Number (VIN
code); III — maximum allowed vehicle weight; IV — maximum allowed front
axle load; V — maximum allowed rear axle load; VI — engine model designa-
tion; VII — configuration code; VIII — offset code; IX — environmental class
I — the Vehicle Description Section (VDS) consists of six
symbols with the first five symbols (digits) designating the engine
model. If the engine model designation includes less than five
digits, zeros shall take the place of blanks. The sixth symbol
(zero or letter) designates the engine configuration option;
II — the Vehicle Identification Section (VIS) consists of eight
symbols. The first symbol (letter or digit) designates the year of
manufacture of the engine, the rest of the symbols (digits) stand
for the engine serial number.
The information plates are located on the inside of the left
sun visor.
6
Fig. 1.3. Location of the engine identification number
7
TECHNICAL SPECIFICATIONS
UAZ motor vehicle models
Description 315195 315148
1 2 3
GENERAL DATA
Dimensions are shown in Fig. 1.1
Motor vehicle type All-terrain, two-axle, 4WD axle configuration
Seating capacity (including driver's seat) 5 5
Maximum load capacity
(incl. driver and passengers), kg:
for operation on roads with
good pavement 750 735
for operation on other
roads and terrain 550 535
Motor vehicle allowable gross weight, kg:
for operation on roads
with good pavement 2520 2550
for operation on other
roads and terrain 2320 2350
Gross weight distribution by axles, kg:
for operation on roads
with good pavement:
front axle load 1020 1020
rear axle load 1500 1530
8
for operation on other
roads and terrain:
front axle load 970 985
rear axle load 1350 1365
Vehicle's curb weight 1), kg 1845 1890
Curb weight distribution by axles, kg:
front axle load 1010 1020
rear axle load 835 870
Maximum speed, km/h 130 120
Fuel consumption in motion
at constant speed of 90 km/h, L/100 km 13.2 10.6
Note. Fuel consumption value is used to determine the motor vehicle technical condition and shall not be regarded as the
operation standard. Fuel consumption measuring accuracy is only ensured in special testing conditions and in strict compliance
with the requirements of GOST 20306-90, when the motor vehicle total mileage reaches 9,000-10,000 km
Gross weight of towed trailer, kg, max:
one equipped with brakes 1500 2)
one without brakes 750 2)
The least turning radius along the front
external (relative to the turning center)
wheel trace axis, m, max 6.5
1 2 3
1) Filled with fuel and lubricants, tools, additional accessories, spare wheel, and by driver
2) Towing a trailer shall only be allowed if there is present a ball-type tow unit, certified as part of a tractor-trailer unit, as per the
established procedure
9
The least turning radius, external by
the front bumper point, outermost
of the turning center, m, max 7.0
Maximum climb for a motor vehicle
of gross weight, degrees (%) 31 (60)
Maximum fordable depth, m:
unprepared 0.5
prepared 0.7
ENGINE
Version ZMZ-40905 ZMZ-51432
Type 4-stroke with spark-plug ignition diesel turbo engine with direct
injection
Number of cylinders four
Cylinder arrangement row, vertical
Ignition sequence 1-3-4-2
Cylinder diameter, mm 95.5 87
Piston stroke, mm 94 94
Engine displacement, L: 2.693 2.235
Compression ratio 9.1 19
Minimum crankshaft rpm at idle, min-1 800-900 850-900
Maximum torque, N•m (kgf•m)
as per UNECE Rules 85
(GOST R 41.85) 209.7 (21.4) at 2,400-2,600 min-1 270 (27.5) at 1,300-2,800 min-1
1 2 3
10
Output, kW (hp):
net as per UNECE Rules 85
(GOST R 41.85) 94.1 (128) at 4,600 min-1 83.5 (113.5) at 3,500 min-1
Lubrication system Combined: force-feed and centrifugal
Case ventilation Closed
Fuel system Multipoint fuel injection with Direct fuel injection by
electronic control
Fuel Unleaded gasoline "Regular-92" Diesel fuel as per GOST R 52368
(AI-92-4) GOST R 51105, (EN 590:2009), of grades A, B, C, D, E, F,
AI-92-K4 GOST 32513 and AI-92V of classes 0, 1, 2, 3, 4, types II and II
GOST RV 9130-001 in accordance with operating conditions
Allowed: Premium Euro-95 type II
(AI-95-4) and Super Euro-98 type II
(AI-98-4) GOST R 51866, AI-95-K4 and
AI-98-K4 GOST 32513.
Cooling system Liquid, closed-loop forced circulation
TRANSMISSION
Clutch:
clutch type Dry, single-disc
drive type Hydraulic
Transmission gear box:
gearbox type Mechanical, synchronized, five-speed
by Dymos Company or made in China
control type Mechanical
Transfer gear box:
gearbox type Two-speed
control type Mechanical
1 2 3
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Automóvil de UAZ
