U-Line H-1229 Manual de usuario

PAGE 1 OF 5 0314 IH-1229

πH-1229

JUMBO

STORAGE SHED

1-800-295-5510

uline.com

Phillips Screwdriver

Safety Glasses

PARTS

Floor Panel (A) x 1 Roof Panel (E) x 1

Lock Hasp x 1

Left Side Panel (B) x 1

Header (F) x 1 #14 x .75 Screw x 32

Right Side Panel (C) x 1

Left Door Panel (G) x 1

Back Panel (D) x 1

Right Door Panel (H) x 1 Door Handle x 2

TOOLS NEEDED

Electric Drill

with Phillips Bit

NOTE: Check that all parts are included in

packaging. Select a site with level ground and

good drainage. The doors and roof function

best when the shed is level.

PAGE 2 OF 5 0314 IH-1229

Step 1:

• Snap left side panel (B) into floor panel (A).

(See Figure 1)

• Position back panel (D) but DO NOT SNAP INTO BASE.

• Interlock back panel (D) into left side panel (B).

• Snap right side panel (C) into floor panel (A).

(See Figure 2)

• Interlock back panel (D) into left side panel (C).

• With back panel interlock with grooves on side

panels, slide down and snap into floor panel.

(See Figure 3)

Step 2:

• Insert header (F) into underside of roof panel (E).

(See Figure 4)

• Use 4 screws to secure header to roof panel.

DO NOT OVERTIGHTEN SCREWS. (See Figure 5)

ASSEMBLY INSTRUCTIONS

Figure 1

Figure 3

Figure 2

Figure 4

Figure 5

PAGE 3 OF 5 0314 IH-1229

Step 3:

• Position roof assembly on top of shed walls.

(See Figure 6)

• Position the bottom hinge pin of left door panel (G)

into left hole on floor panel. (See Figure 6)

• Lift roof slightly on left side and insert left door

panel (G) top hinge pin into hole on roof panel.

(See Figure 6)

• Repeat with right door panel (H). (See Figure 6)

Step 4:

• Secure roof assembly to side panels by inserting

4 screws into dimples on the interior header (See

Figure 7) and 10 screws into the dimples around the

interior roof perimeter. (See Figure 8)

ASSEMBLY INSTRUCTIONS CONTINUED

Figure 6

Figure 7

Figure 8

PAGE 4 OF 5 0314 IH-1229

Step 4 Continued:

• Secure side and back panels to the floor panel

using 6 screws in the dimples along the bottom

interior. (See Figure 9)

Step 5:

• Attach each door handle using 4 screws.

(See Figure 10)

• Snap lock hasp through the back of the left door.

(See Figure 10)

NOTE: Shed can be locked using Uline

padlocks. (Model Number H-1391, H-1392,

H-1632, H-2061, H-2491, or H-2492.)

CARE INSTRUCTIONS

Figure 9

Lock Hasp

Figure 10

ASSEMBLY INSTRUCTIONS CONTINUED

• Periodically inspect the shed to ensure proper

assembly is maintained and site remains level.

• Clean shed using a garden hose or wash with

a mild detergent and water.

• The shed can be anchored to the ground or a

platform by drilling holes in the floor at designated

locations and securing with the proper fasteners (not

included).

CAUTION! Do not clean with a stiff brush or

abrasive cleaner. Wear safety glasses and

follow the manufacturer’s instructions when

using power tools. Do not store hot yard

equipment, grills, or other hot materials in

the shed.

PAGE 5 OF 5 0314 IH-1229

WARNING! Do not exceed 50 lbs. on any one

given wall in the shed structure.

1. Attach 2 wall anchors no more than 6 inches from

the top of the peg board using provided screws.

(See Figure 1)

2. Ensure the anchors are the same distance apart as

the wall slots in the shed. (See Figure 2)

3. Attach 2 more wall anchors to the pegboard

vertically in line with and 22" below the top anchors

using provided screws. (See Figure 2)

4. Hang the peg board by sliding the wall anchors into

the wall slots on the shed. (See Figure 2)

OPTIONAL PEGBOARD INSTALLATION INSTRUCTIONS

Figure 1

Figure 2

1. Attach 2 wall anchors

to each shelf upright

22¹⁄" inches apart

using provided screws.

(See Figure 1)

2. Slide the wall anchors

on the shelf uprights

into wall slots on the

shed. (See Figure 2)

3. Insert shelf supports in the desired locations on

the shelf uprights and lay shelf into position.

(See Figure 3)

OPTIONAL ADJUSTABLE SHELF INSTALLATION INSTRUCTIONS

22½"

Shelf Supports

Figure 2

Figure 1

Figure 3

πCHICAGO•ATLANTA•DALLAS•LOSANGELES•MINNEAPOLIS•NYC/PHILA•SEATTLE•MEXICO•CANADA

1-800-295-5510

uline.com

Tabla de contenidos

Otros manuales de Almacenamiento de herramientas de U-Line

U-Line

U-Line H-10527 Manual de usuario

U-Line

U-Line H-9618 Manual de usuario

U-Line

U-Line H-10801 Manual de usuario

U-Line

U-Line H-2805GR Manual de usuario

U-Line

U-Line H-6405 Manual de usuario

U-Line

U-Line H-7209 Manual de usuario

U-Line

U-Line H-3746 Manual de usuario

U-Line

U-Line H-6450 Manual de usuario

U-Line

U-Line H-9638 Manual de usuario

U-Line

U-Line H-9638 Manual de usuario

U-Line

U-Line H-8184 Manual de usuario

U-Line

U-Line H-8205 Manual de usuario

U-Line

U-Line H-8945 Manual de usuario

U-Line

U-Line H-8704 Manual de usuario

U-Line

U-Line H-2043 Manual de usuario

U-Line

U-Line H-6993-LAM Manual de usuario

U-Line

U-Line H-7562 Manual de usuario

U-Line

U-Line H-1871 Manual de usuario

Manuales populares de Almacenamiento de herramientas de otras marcas

Ryobi

Ryobi RWB03 Manual de usuario

Husky

Husky H27CH5TR4BGK Manual de usuario

Scheppach

Scheppach ts 2100 Manual de usuario

Cornwell Tools

Cornwell Tools CTB360AKBK Manual de usuario

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Manual de usuario

Cassese

Cassese CS200 CART Manual de usuario

Kendall Howard

Kendall Howard ESDW-9630-1000 Manual de usuario

Lista

Lista Align Instrucciones de montaje

Workzone

Workzone 99609 Manual de usuario

Stanley

Stanley STST83800-1 Manual de usuario

Homak

Homak PROFESSIONAL Series Manual del sistema

Perel

Perel ROLLER SHUTTER STORAGE CABINET Manual de usuario

Husky

Husky H5CH2R Manual de usuario

BGS technic

BGS technic 4107 Manual de usuario

Clarke

Clarke CWB1250 Manual de usuario

Ryobi

Ryobi RWB02 Manual de usuario

Husky

Husky H52CH6HDV3WHT Manual de usuario

Sealey

Sealey PTB66004 Manual de usuario