U-Line ADA SERIES Manual de instalación

USER GUIDE & SERVICE MANUAL

SAFETY •INSTALLATION & INTEGRATION •OPERATING INSTRUCTIONS •MAINTENANCE •SERVICE

ADA Series •BI98 •15" Crescent Ice Maker

RIGHT PRODUCT. RIGHT PLACE. RIGHT TEMPERATURE. SINCE 1962.

USER GUIDE & SERVICE MANUAL

u-line.com

Table of Contents

Installation

Integrated Panel Dimensions

Integrated Panel Installation

Grille / Plinth Installation

USER GUIDE u-line.com

Introduction

WELCOME TO U-LINE

Congratulations on your U-Line purchase. Your product comes from a company with over ve decades of premium modular ice

making, refrigeration, and wine preservation experience. U-Line creates products focused on functionality, style, and inspired

innovations — paying close attention to even the smallest details. Applications include residential, outdoor, ADA height

compliant, marine, and commercial. Complete product categories include Beverage Centers, Wine Refrigerators, Ice Machines,

Refrigerators, Freezers, and Dispensers.

Our advanced refrigeration systems, large and exible capacities, and Built-In to Stand Out®clean integrated look allow you

to preserve the right product, in the right place, at the right temperature. Since 2014, U-Line has been part of the Middleby

family of brands. All products are designed, engineered, and assembled in Milwaukee, Wisconsin, USA, and select products

are available worldwide.

PRODUCT INFORMATION

Looking for additional information on your product? User Guides, Spec Sheets, CAD Drawings, Compliance Documentation,

and Product Warranty information are all available for reference and download at u-line.com.

PROPERTY DAMAGE / INJURY CONCERNS

In the unlikely event property damage or personal injury is suspected related to a U-Line product, please take the following

steps:

1. U-Line Customer Care must be contacted immediately at +1.414.354.0300.

2. Service or repairs performed on the unit without prior written approval from U-Line is not permitted. If the unit has been

altered or repaired in the eld without prior written approval from U-Line, claims will not be eligible.

GENERAL INQUIRIES

U-Line Corporation

8900 N. 55th Street

Milwaukee, Wisconsin 53223 USA

Monday - Friday 8:00 am to 4:30 pm CST

T: +1.414.354.0300

Email: sales@u-line.com

u-line.com

CONNECT WITH US

SERVICE & PARTS ASSISTANCE

Monday - Friday 8:00 am to 4:30 pm CST

T: +1.800.779.2547

Service Email: onlineservice@u-line.com

Parts Email: onlineparts@u-line.com

Designed, engineered and assembled in WI, USA

USER GUIDE

Integrated Panel Dimensions 1

u-line.com

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

Integrated Panel Dimensions

DOOR PANEL INSTALLATION

Door Panel Preparation

A custom door panel may be inserted into the door frame.

Custom door panels can be flat or raised, as long as the

maximum panel thickness, where inserted into the door

reveal (channel), is no more than 1/4" (6 mm) thick. For

raised panels, the depth of the reveal is 1/4" (6 mm) on

all four sides.

NOTICE

Raised panels will reduce the door’s 90° swing/

zero clearance if the unit is installed next to a

wall or similar type of structure.

Panel Dimensions

The door panel must not weigh more than 5 lbs.

Width Height

13-15/16" (354 mm) 15-15/16" (405 mm)

USER GUIDE

Integrated Panel Installation 1

u-line.com

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

Integrated Panel Installation

This model accepts a 1/4" insert panel.

INSERT PANEL INSTALLATION

Install the insert as follows:

CAUTION

Use care when handling the insert. Insert edges

may be sharp.

1. Remove top hinge screw pin

with Phillips head screwdriver.

Remove door by tilting forward

and lifting off bottom hinge pin.

2. Pull door gasket out of groove

(top edge of door only). Start in

the middle and pull outward,

moving toward the edge. This

may take some force.

3. Remove two outside screws

holding door handle. Slightly

separate door handle from door.

4. Pull handle up and off.

5. Slide custom door panel insert into 1/4" (6 mm)

channel in door front.

NOTICE

Use care not to damage magnet, located on door

bottom when installing door insert. Do not set

door on bottom edge when pushing insert into

place.

6. Holding door gasket out of the way, replace handle on

door, making sure it is seated properly on insert and

that screw holes line up.

7. Install two small screws removed in Step 3.

8. Starting at the corners and working inward, push door

gasket into place on door.

9. Place door on bottom hinge pin and install upper hinge

screw.

USER GUIDE

Grille - Plinth Installation 1

u-line.com

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

Grille - Plinth Installation

REMOVING AND INSTALLING GRILLE

WARNING

Disconnect electric power to the unit before

removing the grille.

When using the unit, the grille (plinth strip/base

fascia) must be installed.

WARNING

DO NOT touch the condenser fins (4). The

condenser fins are SHARP and can be easily

damaged.

Removing the grille

1. Disconnect power to the unit.

2. Loosen the screw (1).

3. Remove grille (2) from unit.

Installing the grille

1. Align cabinet and grille holes and secure, but do not

over tighten grille screw (1).

2. Reconnect power to the unit.

Otros manuales para ADA SERIES

Este manual sirve para los siguientes modelos

Otros manuales de Máquina de hielo de U-Line

U-Line

U-Line ADA151M Guía de configuración

U-Line

U-Line UMCR015SS02A Manual de instalación

U-Line

U-Line UHCL115SS01A Manual de instalación

U-Line

U-Line 3000 SERIES Manual de instalación

U-Line

U-Line U-BI1215B-00A Manual de usuario

U-Line

U-Line Combo BI98W00A Manual de usuario

U-Line

U-Line CLR1215 Manual de instalación

U-Line

U-Line CLR1215 Manual de usuario

U-Line

U-Line U-CLR1215SOD-00A Manual de instalación

U-Line

U-Line Echelon BI-2115 Manual de usuario

U-Line

U-Line SS1095 Manual de usuario

U-Line

U-Line Modular 3045CLR Manual de usuario

U-Line

U-Line ADA SERIES Manual de instalación

U-Line

U-Line U-CLR1215SOD-00B Manual de instalación

U-Line

U-Line UACR014-SS01A Manual de instalación

U-Line

U-Line UHRI124 Manual de instalación

U-Line

U-Line UONP115-SS01A Manual de instalación

U-Line

U-Line U-BI98B-00A Manual de instalación

U-Line

U-Line Outdoor Series Manual de usuario

U-Line

U-Line Refrigerator/Ice-Maker Combos Manual de usuario

U-Line

U-Line 3018CLR SERIES Manual de usuario

U-Line

U-Line U-CLR1215S-40B Manual de instalación

U-Line

U-Line UMCR014-SC02A Manual de instalación

U-Line

U-Line 3000 SERIES Manual de instalación

Manuales populares de Máquina de hielo de otras marcas

Hoshizaki

Hoshizaki KMD-460MWJ Manual de usuario

Sub-Zero

Sub-Zero 315I Instrucciones de uso

Unold

Unold 48945 Manual de usuario

Kenmore

Kenmore 2217402A Manual de usuario

Cornelius

Cornelius WM600 Instrucciones de funcionamiento

GE XPIO43SCSS Manual de usuario

Hoshizaki

Hoshizaki KMD-901MAH Manual de usuario

Whynter

Whynter FIM-450HA Manual de usuario

Andrew James

Andrew James AJ000522 Manual de usuario

Scotsman

Scotsman CME1356 Manual de usuario

Scotsman

Scotsman ACM 25 Manual de usuario

Kärcher

Kärcher IP 120 Manual de usuario

Maytag

Maytag MIM1554WRS - Ice Maker Manual de usuario

Hoshizaki

Hoshizaki KM-630MAH Manual de usuario

Princess

Princess Yonanas Manual de usuario

Unold

Unold 48946 Manual de usuario

Electrolux

Electrolux E15IM60GP Manual de usuario

Cornelius

Cornelius UC150 ICE ONLY Manual de usuario