Page 1 of 4 AUGUST 2022 TFP741
Worldwide
Contacts
www.tyco-fire.com
IMPORTANT
Refer to Technical Data Sheet
TFP2300 for warnings pertaining to
regulatory and health information.
Always refer to Technical Data
Sheet TFP700 for the “INSTALLER
WARNING” that provides cautions
with respect to handling and instal-
lation of sprinkler systems and com-
ponents. Improper handling and
installation can permanently damage
a sprinkler system or its compo-
nents and cause the sprinkler to fail
to operate in a fire situation or cause
it to operate prematurely.
Scan the QR code or enter the URL
in a web browser to access the most
up-to-date electronic version of this
document. Data rates may apply.
docs.jci.com/tycore/tfp741
Model TF-3 and TF-4 Rapid Install Sprinkler Adapter
1 Inch Male Tapered to
Female RIS Threaded Fitting
General
Description
The TYCO Model TF-3 and TF-4 Rapid
Install Sprinkler (RIS) Adapter 1 Inch
Male Tapered to Female RIS Threaded
Fitting, herein called the RIS adapter,
is a conversion tting between con-
ventional NPT/ISO threads and TYCO
Rapid Install connection technology.
A typical application is to use the RIS
adapter for a retrot conversion from
a conventional pipe tting to an ESFR
RIS sprinkler.
Two models of the RIS Adapter 1 Inch
Male Tapered to Female RIS Threaded
Fitting are available:
• Model TF-3
1 in. Male NPT to Female RIS
• Model TF-4
1 in. Male ISO to Female RIS
NOTICE
The TYCO Model TF-3 and TF-4 Rapid
Install Sprinkler Adapter 1 Inch Male
Tapered to Female RIS Threaded
Fitting described herein must be
installed and maintained in compliance
with this document, as well as with the
applicable standards of the NATIONAL
FIRE PROTECTION ASSOCIATION
(NFPA), in addition to the standards
of any authorities having jurisdiction,
such as FM Global. Failure to do so
may impair the performance of these
devices.
The owner is responsible for main-
taining their fire protection system
and devices in proper operating con-
dition. Contact the installing contrac-
tor or product manufacturer with any
questions.
In all cases, the appropriate NFPA or
FM Global installation standard, or
other applicable standard, must be
referenced to ensure applicability and
to obtain complete installation guide-
lines. The general guidelines in this
data sheet are not intended to provide
complete installation criteria.
Technical
Data
Approvals
UL and C-UL Listed
FM Approved
Finish
Gloss Black Coated Steel
Material
Carbon Steel
Physical Characteristics
Threaded Outlet ................. Steel with
Zinc Chromate Coating
Design
Criteria
In accordance with the requirements of
NFPA, the RIS adapter must be agency
approved and listed.
