TYAN Transport GX28 B2881 Manual de usuario

Transport GX28

B2881

User’s Manual

Document part number: D1584-100

RST

Preface

This publication, including all photographs, illustrations, and soft-

ware, is protected under international copyright laws, with all rights

reserved. Neither this manual, nor any material contained herein,

may be reproduced without written consent of the manufacturer.

Version 1.00

Disclaimer

Information contained in this document is furnished by TYAN

Computer Corporation and has been reviewed for accuracy and reli-

ability prior to printing. TYAN assumes no liability whatsoever, and

disclaims any express or implied warranty, relating to sale and/or

use of TYAN products including liability or warranties relating to fit-

ness for a particular purpose or merchantability. TYAN retains the

right to make changes to product descriptions and/or specifications

at any time, without notice. In no event will TYAN be held liable for

any direct or indirect, incidental or consequential damage, loss of

use, loss of data or other malady resulting from errors or inaccura-

cies of information contained in this document.

Trademark recognition

All registered and unregistered trademarks and company names

contained in this manual are property of their respective owners

including, but not limited to the following.

TYAN, Thunder K8SR S2881, and Transport GX28 are trademarks

of TYAN Computer Corporation.

AMD, Opteron, and combinations thereof are trademarks of

Advanced Micro Devices Corporation.

AMI, AMIBIOS, and combinations thereof are trademarks of AMI

Software Incorporated.

Microsoft Windows is a trademark of Microsoft Corporation.

IBM, PC, AT and PS/2 are trademarks of IBM Corporation.

Winbond is a trademark of Winbond Electronics Corporation.

Federal Communications Commission

Notice for the USA Compliance Information State-

ment (Declaration of Conformity Procedure) DoC

FCC Part 15: This device complies with part 15 of the

FCC Rules.

Operation is subject to the following conditions:

1) This device may not cause harmful interference, and

2) This device must accept any interference received including inter-

ference that may cause undesired operation. If this equipment

does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the

user is encouraged to try one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the

receiver.

•Plug the equipment into an outlet on a circuit different from

that of the receiver.

Consult the dealer on an experienced radio/television technician for

help.

Notice for Canada

This apparatus complies with the Class B limits for radio interfer-

ence as specified in the Canadian Department of Communications

Radio Interference Regulations. (Cet appareil est conforme aux

norms de Classe B d’interference radio tel que specifie par le Minis-

tere Canadien des Communications dans les reglements d’inetefer-

ence radio.)

Notice for Europe (CE Mark) This product is in conformity

with the Council Directive 89/336/EEC, 92/31/EEC

(EMC).

CAUTION: Lithium battery included with this board. Do not puncture,

mutilate, or dispose of battery in fire. Danger of explosion if battery

is incorrectly replaced. Replace only with the same or equivalent

type recommended by manufacturer. Dispose of used battery

according to manufacturer instructions and in accordance with your

local regulations.

iii

About this manual

This manual provides you with instructions on installiing your

Transport GX28 (B2881) consists of the following sections.

Chapter 1 – Overview:

Provides an introduction to the Transport GX28 (B2881) bourbons,

shows a packing list, describes the external components, shows a

tables of key components, and provides a block diagram of the sys-

tem.

Chapter 2 – Setting up:

Covers procedures on installing the CPUs, memory modules,

optional PCI-X card, and hard drives.

Chapter 3 – Replacing pre-installed components:

Covers removal and replacement procedures for pre-installed

components.

Appendix:

Provides maintenance and troubleshooting procedures, an explana-

tion of BIOS, and technical diagrams.

Safety information

Before installing and using the Transport GX28, take note of the fol-

lowing precautions:

•Read all instructions carefully.

•Do not place the unit on an unstable surface, cart, or stand.

•Do not block the slots or openings on the unit which are

provided for ventilation.

•Only use the power source indicated on the marking label.

If you are not sure, contact the power company.

•The unit uses a three-wire grounded cable, which is sup-

plied with a third pin to ground the unit and prevent electric

shock. Do not defeat the purpose of this pin. If your outlet

does not support this type of plug, contact an electrician to

replace the obsolete outlet.

•Do not place anything on the power cord. Place the power

cord where it will not be stepped on.

•Follow all warnings and cautions in this manual and on the

unit case.

•Do not push objects in the ventilation slots as they may

touch high voltage components and result in shock and

damage to the components.

•When replacing parts, ensure that you use parts specified

by the manufacturer.

•When service or repairs have been carried out, perform

routine safety checks to verify that the system is operating

correctly.

•Avoid using the system near water, in direct sunlight, or

near a heating device.

•Cover the unit when not in use.

Table of Contents

Chapter 1: Overview

1.1 About the Transport GX28 (B2881) ............................................ 1

1.2 Product models............................................................................. 1

1.3 Features ........................................................................................ 2

1.4 Unpacking .................................................................................... 3

1.4.1 Box contents. ......................................................................... 3

1.4.2 Accessories ............................................................................ 4

1.4.3 Opening the box..................................................................... 5

1.5 About the product......................................................................... 6

1.5.1 System front view and front panel......................................... 6

1.5.2 System rear view.................................................................... 6

1.5.3 System internal views ............................................................ 7

1.5.4 Block diagram........................................................................ 9

Chapter 2: Setting up

2.1 Before you begin .......................................................................... 11

2.1.1 Work area............................................................................... 11

2.1.2 Tools ...................................................................................... 11

2.1.3 Precautions............................................................................. 12

2.2 Installing motherboard components ............................................. 13

2.2.1 Removing the chassis cover................................................... 13

2.2.2 Installing CPUs ...................................................................... 14

2.2.3 Installing memory .................................................................. 17

2.2.4 Installing a PCI-X/PCI card................................................... 18

2.3 Installing a hard drive................................................................... 21

2.3.1 Installing a SATA hard drive................................................. 21

2.3.2 Installing a SCSI hard disk .................................................... 23

2.4 Rack mounting ............................................................................. 26

Chapter 3: Replacing pre-installed components

3.1 Introduction .................................................................................. 31

3.2 Replacing motherboard components............................................ 32

3.2.1 Disconnecting all motherboard cables................................... 32

3.2.2 Removing motherboard components..................................... 35

3.2.3 Replacing the motherboard.................................................... 37

3.3 Replacing the slim CD-ROM drive.............................................. 39

3.4 Replacing the LED control board ................................................ 40

3.5 Replacing the front panel USB board .......................................... 41

3.6 Replacing the storage backplane.................................................. 42

3.6.1 Replacing the SATA backplane............................................. 42

3.6.2 Replacing the SCSI backplane............................................... 46

3.7 Replacing the power supply ......................................................... 50

3.8 Replacing the cooling fans ........................................................... 51

3.8.1 Pin header diagram ................................................................ 52

Appendix

BIOS.................................................................................................. 53

Introduction.................................................................................... 53

BIOS setup utility .......................................................................... 53

BIOS menu bar .............................................................................. 55

BIOS legend bar............................................................................. 55

BIOS main menu ........................................................................... 56

BIOS advanced menu .................................................................... 57

IDE configuration submenu........................................................... 58

Floppy configuration submenu ...................................................... 59

Super I/O configuration submenu.................................................. 60

Hardware health event monitoring submenu ................................. 61

Event log controls submenu........................................................... 63

Remote access configuration submenu.......................................... 64

USB configuration submenu.......................................................... 65

Onboard device submenu............................................................... 66

BIOS PCI/PnP menu...................................................................... 67

BIOS boot menu ............................................................................ 69

Boot settings configuration submenu ............................................ 69

BIOS security menu....................................................................... 71

BIOS chipset settings..................................................................... 72

Northbridge chipset configuration submenu.................................. 73

Memory configuration submenu.................................................... 73

ECC configuration submenu.......................................................... 74

Southbridge chipset configuration submenu.................................. 75

PCI-X chipset configuration submenu........................................... 76

Power menu ................................................................................... 77

Advanced ACPI configuration submenu ....................................... 79

Global timer reload submenu......................................................... 80

BIOS exit menu ............................................................................. 81

Technical support .............................................................................. 82

Help resources: .............................................................................. 82

Returning merchandise for service ................................................ 82

Chapter 1: Overview 1

Chapter 1: Overview

1.1 About the Transport GX28 (B2881)

Congratulations on your purchase of the Transport GX28

(B2881), rack mountable, barebone system for the AMD

Opteron processor. The GX28 uses AMD's revolutionary x86-

64 Opteron™ processor technology, offering exceptional

computing power and simultaneous support of 32-bit and 64-

bit applications. Removable SATA or SCSI hard disk drives

provide maximum flexibility and combine with gigabit Ether-

net ports to provide powerful computing capacity and optimal

I/O bandwidth for the most demanding enterprises.

The rugged, industry standard 19-inch, rack mountable

design contains four HDD bays, and one slim CD-ROM bay

making it both flexible and practical.

1.2 Product models

The following Transport GX28 (B2881) models are available.

Model HDD bays Hot-swap

support

HDD

backplane Sku

B2881

G28S4H Four removable

HDD bays

Yes 4-port SATA Standard

B2881

G28U4H

Yes 4-port SCSI Standard

RST

1.3 Features

2 Chapter 1: Overview

1.3 Features

Enclosure

• Industry standard, 19-inch rack

mountable, 1U chassis

• (4) external 3.5-inch HDD bays

• (1) slim CD-ROM bay

• 21.5 x 17 x 1.7 inch

(547 x 432 x 43 mm)

Storage

• B2881 G28S4H - (4) hot swappable

SATA HDDS with RAID 0,1,10.

• B2881 G28U4H - (4) hot swappable

SCSI Ultra 320 SCSI HDDs with

ZCR support

• Slim 24x CD-ROM drive

• Optional 3.5-inch FDD

Processors

• Dual PGA 940-pin ZIF socket

• Support for single or dual AMD®

Opteron™ 200 series processors

Motherboard

• Tyan Thunder K8S Pro S2881G2NR

(B2881 G28S4H) or S2881UG2NR

(B2881 G28U4H)

• eATX footprint (13x12 inches)

Chipset

• AMD-8131™ HyperTransport

PCI-X Tunnel

• AMD-8111™ HyperTransport

I/O Hub

• Winbond W83627HF Super I/O chip

• Analog Devices ADT7463 Hardware

Monitoring IC

BIOS

•AMI

®BIOS 8.0 on 4 MB LPC

flash ROM

• ACPI 1.0b & 2.0 support

• PnP, DMI2.0, WfM2.0 power

management

• Power management S1, S4, and

S5 support

Memory

• 128-bit dual channel memory bus

• (8) 184-pin 2.5V DDR DIMM sockets

• Up to 16 GB of registered DDR

• ECC type memory module support

• DDR 400 support

Networking

• (2) Gbit Ethernet ports (Broadcom®

BCM5704C dual-channel GbE LAN

controller connected to PCI-X

bridge) with teaming feature support

Expansion slots

• (2) 64-bit/133/100 MHz PCI-X slots

on riser card

Power supply

• EPS 12V, 1U, 400W with PFC

Back I/O ports

• PS/2 mouse and keyboard ports

• (2) stacked USB 1.1 ports

• (1) 9-pin UART serial port

• (2) RJ-45 LAN ports

• (1) 15-pin VGA port

Video

•ATI

® Rage™ XL PCI Graphics con-

troller

• 8 MB frame buffer video memory

Front panel

• (1) USB 1.1 port

• IDE, LAN, and power LEDs

• Power and reset switches

Regulatory

• FCC Class B (declaration of

conformity)

• CE (declaration of conformity)

Integrated storage controller

• Dual channel IDE

• Silicon Image SI3114 SATA RAID

controller. RAID 0, 1, and 10 support

Server management

• Optional Tyan SMDC (remote server

management kit) IPMI 1.5 compliant

• System fan speed control

1.4 Unpacking

Chapter 1: Overview 3

1.4 Unpacking

This section describes the GX28 package contents and

accessories

1.4.1 Box contents.

Component Description

Industry standard 1U chassis, (4) hot

swappable HDD bays

Choice of motherboard (pre-installed)

• B2881 G28S4H - Tyan S2881G2NR

• B2881 G28U4H - Tyan S2881UG2NR

24x slim CD-ROM drive (pre-installed)

SATA or SCSI backplane and holding

bracket (pre-installed)

LED control board (pre-installed)

(1) 1U, 64-bit riser card, 3.3V (pre-installed)

EPS 12V 400W PSU (pre-installed)

(6) System fans (pre-installed)

Fan holding bar (pre-installed)

RST

Tabla de contenidos

Otros manuales de Servidor de TYAN

TYAN

TYAN B7086T70BV12HR Guía de inicio rápido

TYAN

TYAN FT77-B7015 Guía de inicio rápido

TYAN

TYAN FT77CB7079 Guía de inicio rápido

TYAN

TYAN GT24-B7066 Guía de inicio rápido

TYAN

TYAN MicroServer Series Manual de usuario

TYAN

TYAN GT62B-B7076 Guía de inicio rápido

TYAN

TYAN YR190-B8228 Manual de usuario

TYAN

TYAN FT72 B7015 Guía de inicio rápido

TYAN

TYAN TA70-B8237 Guía de inicio rápido

TYAN

TYAN YR188-B537M Manual de usuario

TYAN

TYAN TS65-B7126 Guía de inicio rápido

TYAN

TYAN GT24 B8212 Manual de usuario

TYAN

TYAN Transport TA26-B3892 Manual de usuario

TYAN

TYAN Tank GT25 (B5381) Guía de inicio rápido

TYAN

TYAN Transport SX TN70E-B8026 Guía de inicio rápido

TYAN

TYAN Transport GT14 B2933 Manual de usuario

TYAN

TYAN GT24-B8226 Manual de usuario

TYAN

TYAN YR190-B7018 Manual de usuario

TYAN

TYAN Transport GT20 B5151 Manual de usuario

TYAN

TYAN B7058Y190X2 Guía de inicio rápido

TYAN

TYAN GT24-B7016-LE Guía de inicio rápido

TYAN

TYAN GN70-B8236-HE Guía de inicio rápido

TYAN

TYAN GN70-B8236 Guía de inicio rápido

TYAN

TYAN FT48-B8812 Guía de inicio rápido

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario