TYAN Tank GT25 B5381 Guía de inicio rápido

Tank GT25

B5381

Service Engineer’s Manual

iii

Table of Contents

Chapter 1:Overview

1.1 About the Transport GT25 B5381 . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.3 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

1.3.1 Opening the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.3.2 Box Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.3.3 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

1.4 About the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.4.1 Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.4.2 Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.4.3 LED Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.4.4 Internal View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1.4.5 Motherboard Block Diagram. . . . . . . . . . . . . . . . . . . . . . . 11

1.4.6 Motherboard Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Chapter 2:Setting Up

2.0.1 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.0.2 Work Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.0.3 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.0.4 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

2.1 Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.1.1 Installing the Server in a Rack. . . . . . . . . . . . . . . . . . . . . . 17

2.2 Installing Motherboard Components. . . . . . . . . . . . . . . . . . . . . . . 23

2.2.1 Removing the Chassis Cover. . . . . . . . . . . . . . . . . . . . . . . 23

2.2.2 Installing the Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

2.2.3 Installing the CPU and Heatsink . . . . . . . . . . . . . . . . . . . . 25

2.2.4 Installing the PCI-X Card . . . . . . . . . . . . . . . . . . . . . . . . . 29

2.3 Installing the External Hard Drive . . . . . . . . . . . . . . . . . . . . . . . . 31

2.4 Installing the Slim FDD (Option) . . . . . . . . . . . . . . . . . . . . . . . . . 33

Chapter 3:Replacing Pre-Installed Components

3.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

3.1.1 Work Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

3.1.2 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

3.1.3 Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

3.2 Disassembly Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

3.3 Removing the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

3.4 Replacing Motherboard Components . . . . . . . . . . . . . . . . . . . . . . 39

3.4.1 Disconnecting All Motherboard Cables . . . . . . . . . . . . . . 39

3.4.2 Removing the Motherboard . . . . . . . . . . . . . . . . . . . . . . . . 41

3.5 Replacing the Slim CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

3.6 Replacing the LED Control Board . . . . . . . . . . . . . . . . . . . . . . . .44

3.7 Replacing the M1012 Adapter Board . . . . . . . . . . . . . . . . . . . . . . 46

3.7.1 M1012 Adapter Board Features for B5381 . . . . . . . . . . . . 48

3.7.2 System Fan Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

3.7.3 M1012 Adapter Board Connector Pin Definition . . . . . . . 50

3.8 Replacing the SATA Backplane . . . . . . . . . . . . . . . . . . . . . . . . . . 55

3.8.1 SATA Backplane Features. . . . . . . . . . . . . . . . . . . . . . . . . 57

3.9 Replacing the Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Appendix I: BIOS Differences

Appendix II: Cable Connection Tables

Appendix III: Memory Population Rules

PREFACE

This publication, including all photographs, illustrations, and soft-

ware, is protected under international copyright laws, with all rights

reserved. Neither this manual, nor any material contained herein,

may be reproduced without written consent of the manufacturer-.

Version 1.0

Disclaimer

Information contained in this document is furnished by TYAN Com-

puter Corporation and has been reviewed for accuracy and reliability

prior to printing. TYAN assumes no liability whatsoever, and dis-

claims any express or implied warranty, relating to sale and/or use of

TYAN products including liability or warranties relating to fitness for

a particular purpose or merchantability. TYAN retains the right to

make changes to product descriptions and/or specifications at any

time, without notice. In no event will TYAN be held liable for any

direct or indirect, incidental or consequential damage, loss of use,

loss of data or other malady resulting from errors or inaccuracies of

information contained in this document.

Trademark Recognition

All registered and unregistered trademarks and company names

contained in this manual are property of their respective owners

including, but not limited to the following.

TYAN and Tank GT25 B5381 are trademarks of TYAN Computer

Corporation.

Intel, Xeon, and combinations thereof are trademarks of Intel Corpo-

ration.

AMD, Opteron, Athlon, and combinations thereof are trademarks of

AMD Corporation.

Phoenix, PhoenixBIOS, and combinations thereof are trademarks of

Phoenix Technologies.

Microsoft Windows is a trademark of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

Winbond is a trademark of Winbond Electronics Corporation.

Portable Document Format (PDF) is a trademark of Adobe Corpora-

tion.

Federal Communications Commission (FCC)

Notice for the USA Compliance Information State-

ment (Declaration of Conformity Procedure) DoC FCC

Part 15: This device complies with part 15 of the FCC

Rules

Operation is subject to the following conditions:

1) This device may not cause harmful interference, and

2) This device must accept any interference received including inter-

ference that may cause undesired operation. If this equipment

does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on,

the user is encouraged to try one or more of the following mea-

sures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and the

receiver.

– Plug the equipment into an outlet on a circuit different from

that of the receiver.

Consult the dealer or an experienced radio/television technician for

help.

Notice for Canada

This apparatus complies with the Class B limits for radio interference

as specified in the Canadian Department of Communications Radio

Interference Regulations. (Cet appareil est conforme aux norms de

Classe B d’interference radio tel que specifie par le Ministere Cana-

dien des Communications dans les reglements d’ineteference

radio.)

Notice for Europe (CE Mark) This product is in conformity

with the Council Directive 89/336/EEC, 92/31/EEC

(EMC).

CAUTION: Lithium battery included with this board. Do not puncture,

mutilate, or dispose of battery in fire. Danger of explosion if battery

is incorrectly replaced. Replace only with the same or equivalent

type recommended by manufacturer. Dispose of used battery

according to manufacturer instructions and in accordance with your

local regulations.

iii

About this Manual

This manual provides you with instructions on installing your

Tank GT25. This manual is intended for experienced users and inte-

grators with hardware knowledge of personal computers.

This manual consists of the following parts:

Chapter 1: Provides an introduction to the GT25 B5381 bare-

bones, packing list, describes the external compo-

nents, gives a table of key components, and pro-

vides block diagrams of the system.

Chapter 2: Covers procedures on installing the CPU, mem-

ory modules, an optional PCI-X card, and hard

drives.

Chapter 3: Covers removal and replacement procedures for

pre-installed components.

Appendix: Provides information on installing SMDC cards

and describes the differences between mainboard

BIOS and system BIOS. The cable connection

tables are also provided for reference of system

setup.

For information on the mainboard, please refer to the attached main-

board user’s manual. You can find the detailed description about

jumper and BIOS settings from the motherboard manual.

SAFETY INFORMATION

Before installing and using the Tank GT25, take note of the following

precautions:

–Read all instructions carefully.

–Do not place the unit on an unstable surface, cart, or stand.

–Do not block the slots and opening on the unit, which are pro-

vided for ventilation.

–Only use the power source indicated on the marking label. If

you are not sure, contact the power company.

–The unit uses a three-wire ground cable, which is equipped

with a third pin to ground the unit and prevent electric shock.

Do not defeat the purpose of this pin. If your outlet does not

support this kind of plug, contact your electrician to replace

your obsolete outlet.

–Do not place anything on the power cord. Place the power

cord where it will not be in the way of foot traffic.

–Follow all warnings and cautions in this manual and on the

unit case.

–Do not push objects in the ventilation slots as they may touch

high voltage components and result in shock and damage to

the components.

–When replacing parts, ensure that you use parts specified by

the manufacturer.

–When service or repairs have been done, perform routine

safety checks to verify that the system is operating correctly.

–Avoid using the system near water, in direct sunlight, or near

a heating device.

–Cover the unit when not in use.

Chapter 1: Overview 1

Chapter 1: Overview

1.1 About the Tank GT25 B5381

Congratulations on your purchase of the TYAN TankTM GT25

B5381, a highly-optimized rack-mountable barebone system.

The Tank GT25 B5381 is designed to support dual Intel®

Dempsey and Woodcrest processors, providing a rich feature

set and incredible performance. Leveraging advanced tech-

nology from Intel®, the Tank GT25 B5381 server system is

capable of offering scalable 32 and 64-bit computing, high-

bandwidth memory design, and a lightning-fast PCI-E bus

implementation. The TankTM GT25 B5381 not only empowers

your company in today’s demanding IT environment but also

offers a smooth path for future application usage.

TYAN is also proud to deliver the TankTM GT25 B5381 in

SATA flavor while supporting up to four (4) hot-swap hard

drives, one (1) slim DVD-ROM, and one (1) optional slim

floppy disk drive (not included). The TankTM GT25 B5381

uses TYAN’s latest tooling-made chassis featuring a robust

structure, tool-less and modularized design, and a solid

mechanical enclosure. All of this provides the TankTM GT25

B5381 the power and flexibility to meet the needs of nearly

any server application.

2 Chapter 1: Overview

1.2 Features

Enclosure

• Industry 19” rack-mountable 1U

chassis storage bay

– (4) 3.5” HDD bays

– (1) slim line DVD-ROM bay

– (1) slim line FDD bay

• Dimensions: D 27.87 x W 17.17 x H

1.71 inch (708x436x43.5mm)

Processor

• Two 771 sockets

• Supports up to two Intel®Dempsey

(1066MHz FSB) and Woodcrest

(1333MHz FSB) processors

Chipset

• Intel 5000P Memory Controller Hub

• Intel ESB2-E I/O Controller Hub

• Winbone W83627DHG Super I/O

chip

• ADT7463 Hardware Monitoring IC

(on fan board)

Memory

• 12 dual ranked DDRII 533/667 FBD

sockets

• Supporting up to 48GB memory

size

• Four channels of Fully Buffered

DIMM (FBD)

• Supports 256MB, 512MB, 1GB,

2GB, and 4GB FB-DDRII DIMM

Expansion Slots

• Aligned (1) 64-bit/133MHz PCI-X

slot and (1) x8 PCI-E slot, support-

ing (1) ful height/full length add-on

PCI-X(M2055) or PCI-E(M2082

card

• Aligned (1) 64-bit/133MHz PCI-X

slot and (1) x16 PCI-E slot (x8 lane),

supporting (1) low-profile PCI-

X(M2057) or PCI-E(M2086) add on

card

• 2 usable expansion slots

Back I/O Ports

• (1) PS/2 mouse & keyboard port

• (1) 9-pin UART serial port

• (1) 15-pin VGA port

• (2) RJ-45 10/100/1000 ports

• (2) USB 2.0 ports

• (1) 4-port SAS connector (SSF-

8470)

Front Panel Features

•I/O

– (2) USB 2.0 ports

• LED indicators

– Power LED

– (2) LAN LEDs

– HDD active LEDs

– System warning LED

–IDLED

•Switches

– Power

– Reset

–NMI

–ID

Integrated Storage Controller

• Embedded 4-port SATA-II from

ESB2-E for models B5381G25V4H

– Supports four SATA-II ports run

ning at 3.0Gb/s

• On board LSI1068E SAS controller

for model B5381G25W4H/R

– Supports 8-port SAS ; 4 ports for

internal connection and 4 ports

for external storage connection

Storage

• Pre-installed slimtype DVD-ROM

• HDD support

– B5381G25V4H: Supports (4) hot-

swappable SATA-II HDD with

RAID 0, 1, 5, 10

– B5381G25W4H/R: Supports (4)

hot-swappable SAS/SATA-II

HDD with RAID 0, 1, 5, 10

Networking

• Intel 82563 GbE PHY supports dual

GbE ports

Video

• ATI ES1000 with 16MB frame

buffer

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Servidor de TYAN

TYAN

TYAN MicroServer Series Manual de usuario

TYAN

TYAN GT24-B8226 Manual de usuario

TYAN

TYAN GT24E-B7106 Guía de inicio rápido

TYAN

TYAN TS65A-B8036 Guía de inicio rápido

TYAN

TYAN TS65-B7126 Guía de inicio rápido

TYAN

TYAN MicroServer FM65-B5531 Guía de inicio rápido

TYAN

TYAN TN71-BP012 Manual de usuario

TYAN

TYAN GT62B-B5539 Guía de inicio rápido

TYAN

TYAN Transport VX50 (B4985 Series) Manual de usuario

TYAN

TYAN Transport GT28 B2935 Manual de usuario

TYAN

TYAN Transport TN27 B4987 Manual de usuario

TYAN

TYAN GN70-B7056 Guía de inicio rápido

TYAN

TYAN FT48-B8812 Guía de inicio rápido

TYAN

TYAN FT83A-B7129 Guía de inicio rápido

TYAN

TYAN GT20 B7002 Manual de usuario

TYAN

TYAN Tank FT48 B5382 Manual de usuario

TYAN

TYAN FT77-B7015 Guía de inicio rápido

TYAN

TYAN TS75A-B8252 Guía de inicio rápido

TYAN

TYAN GT75B-B7102 Guía de inicio rápido

TYAN

TYAN B7086T70BV12HR Guía de inicio rápido

TYAN

TYAN GC68-B7126 Guía de inicio rápido

TYAN

TYAN YR188-B537M Manual de usuario

TYAN

TYAN Transport NR12 B6601 Manual de usuario

TYAN

TYAN TA77-B7061 Guía de inicio rápido

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario