TYAN Triumph i7230 Manual de usuario

http://www.tyan.com

Triumph i7230 ///

S6611

Version 1.0

this manual may be reproduced or translated without prior written consent from

TYAN Computer Corp.

Trademark

All registered and unregistered trademarks and company names contained in

this manual are property of their respective owners including, but not limited to

the following.

TYAN, Taro and Triumph i7230 are trademarks of TYAN Computer Corporation.

AMD, Opteron, and combinations thereof are trademarks of AMD Corporation.

Nvidia and nForce are trademarks of Nvidia Corporation

Microsoft, Windows are trademarks of Microsoft Corporation.

SuSE,is a trademark of SuSE AG.

Linux is a trademark of Linus Torvalds

IBM, PC, AT, and PS/2 are trademarks of IBM Corporation.

Winbond is a trademark of Winbond Electronics Corporation.

Notice

Information contained in this document is furnished by TYAN Computer

Corporation and has been reviewed for accuracy and reliability prior to printing.

TYAN assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN products including liability or

warranties relating to fitness for a particular purpose or merchantability. TYAN

retains the right to make changes to product descriptions and/or specifications

at any time, without notice. In no event will TYAN be held liable for any direct or

indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

http://www.tyan.com

Table of Contents

Chapter 1: Introduction

1.1 Congratulations Page 5

1.2 Hardware Specifications Page 5

Chapter 2: Board Installation

2.1 Board Image Page 10

2.2 Block Diagram Page 11

2.3 Board Parts, Jumpers and Connectors Page 12

2.4 Mounting the Motherboard Page 24

2.5Installing the Memory Page 25

2.6 Installing the Processor and Cooling Fan Page 27

2.7Attaching Drive Cables Page 30

2.8Installing Add-In Cards Page 32

2.9Connecting External Devices Page 32

2.10 LAN Bypass Function Page 34

2.11Installing the Power Supply Page 35

2.12Finishing Up Page 36

Chapter 3: BIOS

3.1 About the BIOS Page 37

3.2 Main BIOS Setup Page 39

3.3BIOS Main Menu Page 40

3.4BIOS Advanced Menu Page 46

3.5BIOS Security Menu Page 62

3.6BIOS Power Menu Page 64

3.7BIOS Boot Menu Page 66

3.8BIOS Exit Menu Page 67

Chapter 4: Diagnostics

4.1 Beep Codes Page 69

4.2 Flash Utility Page 69

4.3 Phoenix BIOS Post Code Page 70

Appendix I: How to Make a Driver Diskette Page 73

Glossary Page 75

Technical Support Page 81

http://www.tyan.com

Check the box contents!

The retail motherboard package should contain the following:

1x Triumph i7230 motherboard

1x SATA cable

1x PS/2 cable

1 x VGA Port cable

1x COM Port cable

1x TYAN driver CD

If any of these items are missing, please contact your vendor/dealer for

replacement before continuing with the installation process.

http://www.tyan.com

NOTE

http://www.tyan.com

Chapter 1: Introduction

1.1 -Congratulations

You have purchased one of the most powerful server solutions available. The

Triumph i7230 (S6611) is a high-end server motherboard, based on the Intel

E7230 (Mukilteo) chipset. It also includes the Intel ICH7RI/O and Intel

6700PXH PCI/PCI-X chipsets.

This motherboard is designed to support one Intel Pentium 4 Series processor

and 8GB of DDRII 667/533/400 memory. The S6611 is ideal for CPU, memory,

and network intensive applications required in the HPC and clustering

environments.

Remember to visit TYAN’s Website at http://www.tyan.com. There you can find

information on all of TYAN’s products with FAQs, online manuals and BIOS

upgrades.

1.2 -Hardware Specifications

Processor

•Single LGA775 Socket, supports Intel

Pentium D & Pentium 4 processors

with 1066/800/533 MHz Front Side

Bus as follows:

-Pentium Extreme Edition 955 & 965

-Pentium Extreme Edition 840

-Pentium D 920, 930, 940 & 950

-Pentium D 820, 830 & 840

-Pentium 4 662 & 672

-Penitum 4 631, 641, 651 & 661

-Penitum 4 630, 640, 650, 660 & 670

-Penitum 4 521, 531, 541, 551, 561 &

571

-Penitum 4 520J, 530J, 540J, 550J,

560J & 570J

-Pentium 4 520, 530, 540, 550 & 560

-Celeron D 326, 331, 336, 341, 346 &

351

-Celeron D 325J, 330J, 335J, 340J,

345J

Memory

•Four 240-pin DDR2 sockets support

up to 8GB

•Dual channel memory bus (must be

populated in pairs)

•Supports Un-buffered DDR2

667/533/400 compliant ECC/Non-

Chipset

•Intel E7230 (Mukilteo) Memory

Controller Hub

•Intel ICH7RI/O Controller Hub

•Intel 6700PXH PCI/PCI-X Controller

Hub

Integrated LAN Controllers

•Two Intel 82546 dual port Gigabit

controllers

•Four Intel 82573 PCI-E gigabit

controllers

•Configurable numbers of LAN

connections, Max. 8 ports supported

(refer to Available Models)

LAN Bypass

•Supports Bypass feature over two

pairs of LAN ports (optional)

•Bypass mode enabling is default when

power down or to be enabled by

watchdog when system failed

Accessories

•PCI-X Riser Card with 1 PCI-X slot for

•PCI-X Riser Card with 3 PCI-X slots

for 2U

http://www.tyan.com

ECC DIMM

•Supports 128MB, 256MB, 512MB,

1GB, 2GB DIMM

•Supports standard SEC-DED with 72-

bit ECC DIMM

System Management

•Total eight 3-pin fan headers with

control and tachometer monitoring

•Monitors voltage for CPU, Memory &

Power Supply

•Monitors temperature for CPU &

environment

•Pin header for Fault LED,

Power/Suspend LED & HDD activity

LED

•One pin header for Chassis Intrusion

detection

•Supports Serial console Redirection

•Watch Dog Timer supported

Integrated I/O

•One 40-pin IDE connector or one 50-

pin compact Flash type II connector

(configurable)

•Four SATA connectors

•One pin header for USB ports

(supports two USB 2.0 devices)

•Two shrouded header for serial port

•One shrouded header for parallel port

•One pin header for PS/2 mouse and

keyboard

•One pin header for VGA port

•One pin header for Switch/LED

connection with NMI, SM-Bus,

Chassis Intrusion supported

Form Factor

•ATX form factor (12”x 10.5”; 305 x

265mm)

Networking Security

(S6611T4P4H)

•One board Cavium CN-1010-X-G

Security Macro Processor supports

IPsec/SSL (refer to Available Models)

Back Panel I/O Ports

•One serial port with D-Sub connector

•Two USB 2.0 ports with dual-stack

USB connector

•Up to eight LAN ports with RJ45

connector includes Transformer &

LED (refer to Available Models)

•Up to four LAN ports with SFP Fiber

connectors (refer to Available Models)

Integrated 2D/3D Graphics

•ATi ES1000 PCI graphics controller

with 16MB frame buffer

Expansion Slots

•One 64-bit 133MHz PCI-X slot (3.3V)

•Supports up to 3 PCI-X devices with

Riser Card

•One Mini-PCI Slot

BIOS

•Phoenix BIOS on 8Mbit Flash ROM

•Supports ACPI 2.0

•Supports boot from USB device

•Power-on mode control for AC power

loss recovery

http://www.tyan.com

Available Models

Part Number

GbE

Fiber GbE

Copper Encryption

Chip Remarks

S6611T4P4H

4 ports 4 ports CN-1010-X-GStandard Model

S6611P8B2 N/A 8 ports N/A Standard Model

(Support LAN Bypass

Function)

S6611T4H 4 ports N/A CN-1010-X-G

S6611T2P2H

2 ports 2 ports CN-1010-X-G

S6611P4H N/A 4 ports CN-1010-X-G

S6611T2P4H

2 ports 4 ports CN-1010-X-G

S6611T4P44 ports 4 ports N/A

S6611T4P2 4 ports 2 ports N/A

S6611T2P22 ports 2 ports N/A

S6611P4 N/A 4 ports N/A

http://www.tyan.com

NOTE

http://www.tyan.com

Chapter 2: Board Installation

Precautions: The Triumph i7230 supports SSI, EPS12V type power supplies

(24pin + 8pin) and will not operate with any other types. For proper power

supply installation procedures see page 35.

DO NOT USE ATX 2.x or ATXGES power supplies as they will damage the

board and void your warranty.

How to install our products right…the first time

The first thing you should do is reading this user’s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and

then touch a safely grounded object to release static charge (i.e. power

supply case). For the safest conditions, TYAN recommends wearing a

static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the

board, or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors,

memory modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the

antistatic bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

NOTE

DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN

DAMAGED.

http://www.tyan.com

2.1-Board Image

This picture is representative of the latest board revision available at

the time of publishing. The board you receive may or may not look

exactly like the above picture.

The following page includes details on the vital components of this

motherboard.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de TYAN

TYAN

TYAN Thunder i7501 Pro S2721-533 Manual de usuario

TYAN

TYAN S2723 Manual de usuario

TYAN

TYAN Tiger i7500 Manual de usuario

TYAN

TYAN S5642 Manual de usuario

TYAN

TYAN S2505T Instrucciones de instalación y funcionamiento

TYAN

TYAN THUNDER K8HR Manual de usuario

TYAN

TYAN S7106 Manual de usuario

TYAN

TYAN Triumph i7520 (S6623) Manual de usuario

TYAN

TYAN TIGER I7322DP Manual de usuario

TYAN

TYAN S7070 Manual de usuario

TYAN

TYAN Tempest i5000VS S5372-LC Manual de usuario

TYAN

TYAN S7052 Manual de usuario

TYAN

TYAN S2692 Manual de usuario

TYAN

TYAN Tiger K8WE Manual de usuario

TYAN

TYAN Triumph i845GV S6601 Manual de usuario

TYAN

TYAN Tomcat i875P S5102 Manual de usuario

TYAN

TYAN TEMPEST I5000PW Manual de usuario

TYAN

TYAN S8020 Manual de usuario

TYAN

TYAN Tiger MP S2460 Manual de usuario

TYAN

TYAN S8230 Manual de usuario

TYAN

TYAN TOMCAT I7210 Manual de usuario

TYAN

TYAN S3227 Manual de usuario

TYAN

TYAN S7063 Manual de usuario

TYAN

TYAN TOMCAT I875P Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario