TYAN TOMCAT I845 Manual de usuario

http://www.TYAN.com

Tomcat K7M /// S2498

Revision 1.02

may be reproduced or translated without prior written consent from TYAN Computer Corp.

All registered and unregistered trademarks and company names contained in this manual are the

properties of their respective owners, including, but not limited to the following.

TYAN, Tomcat K7M S2498 are trademarks of TYAN Computer Corporation.

AMD, Geode and the combinations thereof are trademarks of AMD Corporation.

Award BIOS is a trademark of Phoenix Technology.

Microsoft, Windows are trademarks of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

Realtek is a trademark of Realtek Semiconductor Corporation.

Winbond is a trademark of Winbond Electronics Corporation.

Information contained in this document is provided by TYAN Computer Corporation and which has

been reviewed for accuracy and reliability before printing, however, TYAN assumes no liability and

disclaims any express or implied warranty relating to sale and/or use of TYAN products including

liability or warranties relating to fitness for a particular purpose or merchantability.

TYAN retains the right to make changes to product descriptions and/or specifications at any time,

without notice. In no event will TYAN be held liable for any direct or indirect, incidental or

consequential damage, loss of use, loss of data or other malady resulting from errors or

inaccuracies of information contained in this document.

http://www.TYAN.com

Table of Contents

Before you begin…

Chapter 1: Introduction

1.1 Congratulations!

1.2 Hardware Specifications

Chapter 2: Board Installation

2.1 Board Image

2.2 Block Diagram

2.3 Board Parts, Jumpers and Connectors

2.4 Front Panel Connector (JP3)

2.5 CMOS Reset (JP13)

2.6 S/PDIF Header (J1)

2.7 USB Header (JP2)

2.8 Audio Header (J5)

2.9 LAN1 LED Header (JP8, JP14)

2.10 *LAN2 LED Header (*JP7,*JP15,*JP16)

2.11 VGA Header

2.12 Internal Audio Connector (CD_IN)

2.13 Mounting the Motherboard

2.14 Installing the Memory

2.15 Memory Installation Procedure

2.16 Installing the Processor and Heatsink

2.17 Attaching Drive Cables

2.18 Installing Add-In Cards

2.19 Connecting External Devices

2.20 Installing the Power Supply

2.21 Finishing Up

Chapter 3: BIOS Setup

3.1 Main BIOS Setup

3.2 Standard CMOS Features

3.3 Advanced BIOS Features

3.4 Advanced Chipset Features

3.5 Integrated Peripherals

3.6 Power Management Setup

3.7 PnP/PCI Configurations

3.8 PC Health Status

3.9 Load Fail-Safe Defaults

3.10 Load Optimized Defaults

3.11 Supervisor/User Password Setting

3.12 Exit Selecting

Chapter 4: Diagnostics

4.1 Beep Codes

4.2 Flash Utility

Appendix I: Glossary

Technical Support

……………………………………………..Page 3

……………………………………………..Page 4

……………………………………………..Page 6

……………………………………………..Page 7

……………………………………………..Page 8

……………………………………………..Page 9

…………………………………………….Page 11

……………………………………………..Page 12

……………………………………………Page 12

……………………………………………Page 13

……………………………………………Page 14

……………………………………………Page 15

……………………………………………Page 16

……………………………………………Page 17

……………………………………………Page 18

……………………………………………Page 19

……………………………………………Page 22

……………………………………………Page 23

……………………………………………Page 24

……………………………………………Page 25

……………………………………………Page 27

……………………………………………Page 29

……………………………………………Page 31

……………………………………………Page 34

……………………………………………Page 39

……………………………………………Page 44

……………………………………………Page 48

……………………………………………Page 49

……………………………………………Page 50

……………………………………………Page 51

……………………………………………Page 53

……………………………………………Page 55

http://www.TYAN.com

Before you begin…

Check the box contents!

The retail motherboard package should contain the following:

1x Tomcat K7M motherboard

1x 34-Pin floppy drive cable

1x Ultra-DMA-133/100/66 IDE cable

1x Tomcat K7M User’s Manual

1 x Tomcat K7M Quick Reference

1 x TYAN driver CD

1 x SATA Power Cable

2 x SATA DATA cable

1x I/O shield

If any of these items are missing, please contact your vendor/dealer for replacement before

continuing with the installation process.

http://www.TYAN.com

Chapter 1: Introduction

1.1 – Congratulations!

You have just bought one of the most advanced platforms as a high Quality/reliable single board

computer. The Tomcat K7M is based on VIA KN400A chipset, supporting the AMD Geode NX

Processor with 133MHz FSB, DDR memory, VIA integrated Unichorme Graphics and more. These

features enable breakthrough performance for today’s rapidly developing multimedia applications.

Visit TYAN’s Website at http://www.TYAN.com. There you can find information on all of TYAN’s

products with FAQ’s, distributor’s list and BIOS setting explanations.

1.2 – Hardware Specification

Processor

Single Socket A (Socket 462)

Support AMD Geode NX1250, NX1500 and

NX1750 CPU 453pin OPGA package.

Expansion Slots

Two 32Bit/33MHz PCI 2.3 Slots

Chipset

VIA KN400A chipset

VT8237

Winbond W83697HF LPC I/O chip

Realtek ALC655 AC’97 codec chip

Memory

Single memory channel

Supports up to two PC2100/2700 DIMMs

Up to 2GB of un-buffered Non-ECC memory

Integrated IDE

Dual channel master mode support up to four

IDE devices

Support for ATA-100/66/33 IDE drives and

ATAPI compliant devices

Integrated Serial ATA

Serial ATA Host controllers embedded

Two Serial ports running at 1.5Gb/s

Integrated LAN Controllers

One Integrated Realtek RTL8100C 10/100

Mbps Ethernet controller

Integrated Intel82541 Gigabit Ethernet

controller. (AGNN version only)

Back Panel I/O Ports

Stacked PS/2 Mouse & Keyboard ports

Stacked USB 2.0 ports (4 ports total)

One 9-pin UART Serial port

One 15-pin VGA port

One 25-pin SPP/ECP/EPP parallel port

One RJ45 10/100 Base-T port

One RJ45 10/100/1000 Base-T port

(AGNN version only)

Vertical Mic-In/Line-In/Line-out audio jacks

(AGN version only)

Integrated I/O Interfaces

One Floppy connector for up to two drives

Two IDE connectors for up to four IDE

devices

Two SATA connectors for up to two devices

Two USB 2.0 Ports (via optional cable)

Pin headers for LAN LED/I2C/Chassis

intrusion

Pin headers for 1*system Fans

Tyan 2 x 9 front panel connector

Com2 ports (pin header)

One integrated 11pin VGA pin header

CD Audio-input Connector

Mic, and Line-out pin header

S/PDIF out pin header

Integrated Graphics

Integrated S3 Graphics UniChormeTM 2D/3D

engine with MPEG-2 acceleration

Share memory: 16/32/64MB

http://www.TYAN.com

BIOS

Award BIOS 4Mbit Flash

Supports APM 1.2 & ACPI 1.0

Auto detection of memory size

Auto configuration of IDE hard disk types

User settings of hardware monitoring

Multiple boot options

Power Management: S1, S3, S4

Support AMD PowerNow! ™ technology

OS (Operating System) Support

Microsoft Windows 2000

Microsoft Windows XP

Linux Redhat 8.0 and 9.0

Regulatory

FCC Class B (Declaration of Conformity)

European Community CE (Declaration of

Conformity)

Power

On board 2-phase VRD

ATX / ATX12V (20-pin) power connector

Form Factor

Flex ATX footprint

9” x 7.5” (228.6cm x 190.5mm)

http://www.TYAN.com

Chapter 2: Board Installation

Installation

You are now ready to install your motherboard. The mounting hole pattern of the Tomcat K7M

matches the ATX system board specifications. Your chassis should support a standard ATX

motherboard form factor.

How to install our products right…. the first time!

The first thing you should do is read this user’s manual. It contains important information that will

make configuration and setup much easier. Here are some precautions you should take when

installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the antistatic bag.

Unplug the power from your computer power supply and then touch a safely grounded

object to release static charge (i.e. power supply case). For the safest conditions, TYAN

recommends wearing a static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the board, or flex the

board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors, memory modules,

and leads.

(4) Place the motherboard on a grounded antistatic surface or on the antistatic bag that the

board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your chassis, as well

as installing the processor, memory, disk drives and cables.

NOTE DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN DAMAGED

http://www.TYAN.com

2.1 – Board Image

The following is an image of the Tomcat K7M 2498AGNN.

This picture is representative of the latest board revision available at the time of

publishing. The board you receive may or may not look exactly like the above picture.

The following page includes details on the vital components of this motherboard.

http://www.TYAN.com

2.2 – Block Diagram

S2498 Tomcat K7M Block Diagram

http://www.TYAN.com

2.3 – Board Parts, Jumpers and Connectors

NOTE: * is only available on S2498AGNN version.

http://www.TYAN.com

This jumper diagram is representative of the latest board revision available at the time of

publishing. The board you receive may or may not look exactly like the above diagram.

Function Settings

JP3 Front Panel Connector See Section 2.4 for pinout

configuration

JP13 CMOS Reset

Close Pin-1 and Pin-2 (Default)

Normal mode

Close Pin-2 and Pin-3

Clear CMOS mode

J1 S/PDIF Header See Section 2.6 for pinout

configuration

JP2 USB Header See Section 2.7 for pinout

configuration

J5 Audio Header See Section 2.8 for pinout

configuration

JP8, JP14 LAN1 LED Header See Section 2.9 for pinout

configuration

*JP7,*JP15

,*JP16 *LAN2 LED Header See Section 2.10 for pinout

configuration

J37 VGA Header See Section 2.11 for pinout

configuration

CD_IN Internal Audio Connector See Section 2.12 for pinout

configuration

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de TYAN

TYAN

TYAN Tiger K8WE Manual de usuario

TYAN

TYAN Tomcat K8E-SLI S2866 Manual de usuario

TYAN

TYAN Tempest i5100W Manual de usuario

TYAN

TYAN THUNDER N3600B Manual de usuario

TYAN

TYAN TEMPEST I5000VF Manual de usuario

TYAN

TYAN TOMCAT H1000S Manual de usuario

TYAN

TYAN TIGER K8W Manual de usuario

TYAN

TYAN S2505T Instrucciones de instalación y funcionamiento

TYAN

TYAN Thunder i7501 Pro S2721-533 Manual de usuario

TYAN

TYAN TRINITY 450 Manual de usuario

TYAN

TYAN S5552 Manual de usuario

TYAN

TYAN Tomcat i845GV S2198 Manual de usuario

TYAN

TYAN TRINITY 100AT Manual de usuario

TYAN

TYAN TEMPEST I5000PW Manual de usuario

TYAN

TYAN S8030 Manual de usuario

TYAN

TYAN TOMCAT I875PR Manual de usuario

TYAN

TYAN S7012 Manual de usuario

TYAN

TYAN S7100 Manual de usuario

TYAN

TYAN S5535 Manual de usuario

TYAN

TYAN THUNDER 2500 Manual de usuario

TYAN

TYAN S5376 Manual de usuario

TYAN

TYAN Thunder i7501 S2720-533 Manual de usuario

TYAN

TYAN Thunder 100 S1836 Manual de usuario

TYAN

TYAN TOMAHAWK BX Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario