TYAN TIGERCUB ATX Manual de usuario
What’s New?
We have added a glossary to our manuals and have expanded our
installation guide. We think you will find both more thorough, and
thoroughly helpful. Our simple but accurate glossary explanations make
it possible for the most novice of end users to understand the technical
jargon that pops up in these pages. The numerous pictures in the step-
by-step installation guide make it easy for you to put together your
system without help from technical support personnel.
Don’t like an explanation? Want to see terms explained that we left out?
Have any other comments? Visit the TYAN web page and let us know
about it at www.tyan.com/html/contacts.html
Table of Contents
1. Introduction...........................................................................4
Overview........................................................................4
Icons.............................................................................. 5
Hardware Specifications/Features................................... 6
Software Specifications...................................................8
Technical Support...........................................................8
Returning Merchandise for Service................................9
Trademarks..................................................................9
2. Board Installation..............................................................10
Unpacking....................................................................10
Installation....................................................................10
Setting Jumpers.............................................................25
3. Onboard Resource Settings..............................................26
Quick Reference for Jumpers........................................26
Map of Motherboard Jumpers....................................... 27
Soft Power Connector.................................................. 31
Speaker Connector Installation...................................... 31
Hardware Reset Switch Connector Installation...............31
External SMI............................................................... 32
Chassis Intrusion Alarm Connector................................ 32
CMOS RTC.................................................................32
Flash EEPROM........................................................... 33
Hardware CMOS & Password Reset............................33
RAM Installation.......................................................... 33
Cache Memory.............................................................34
Frequently Asked Questions..........................................35
4. BIOS Configuration...........................................................38
Introduction to Setup.....................................................38
Main Setup Menu......................................................... 42
Standard CMOS Setup..................................................44
BIOS Features Setup....................................................48
Chipset Features Setup................................................. 52
Power Management Setup............................................ 57
PnP/PCI Configuration................................................. 61
Integrated Peripherals...................................................64
Password Setting..........................................................67
Flash Writer Utility........................................................67
5. System Resources.............................................................70
POST Messages.......................................................... 70
Glossary.......................................................................74
http://www.tyan.com
4
Chapter 1
Introduction
chapter 1
Introduction
Overview
The S1694SA/L Tigercub is a quality, high performance mainboard
designed for Intel Celeron and Pentium II microprocessors. This
mainboard utilizes the Intel 440EX AGPset and supports CPU speeds
of 233MHz through 333MHz and a host bus speed of 66MHz.
The Tigercub mainboard, with built-in AGP slot, provides high perfor-
mance capabilities that are ideal for a wide range of demanding appli-
cations such as CAD, CAM, CAE, desktop publishing, 3D animation,
and video production.
This integrated system board achieves high reliability with numerous
features and yet is small enough to be supported in a Micro ATX form
factor. Some of the features included are onboard dual channel PCI
PIO, Bus Master IDE and UltraDMA/33, onboard floppy controller,
and onboard high speed I/O.
Flexibility and expandability have been designed into the Tigercub. With
I/O and drive controller support built onboard, optional sound controller
http://www.tyan.com
5
INTRO
onboard, the one AGP slot, two PCI and two ISA slots (one shared,
four usable) are free for add-on expansion cards.
Remember to take a look at TYAN Computer’s web site located at
http://www.tyan.com. There you can find information on all of TYAN’s
products along with FAQs, distributors list, drivers, and BIOS setting
explanations.
Icons
In order to help you navigate this manual and set up your system, we
have added several icons to our format.
This icon alerts you to particularly important details regard-
ing the setup or maintenance of your system. This icon
often appears next to information that may keep you from
damaging your board or system. While we will often point out the most
vital paragraphs in a chapter, you should always read every word in the
text. Failing to do so can lead to exasperation and expense.
Wherever possible, we have included step-by-step instruc-
tions for setting up your system, which are indicated by
this icon. However, it is in your best interest to read an
entire section (and perhaps the entire manual) before you begin to
fiddle with your motherboard.
While we have alerted you to potential dangers in several
places in the manual with this icon, these warnings should
not be regarded as the whole of your safety regimen.
Never forget that computers are electrical devices, and are capable of
delivering a shock. Prevent damage to yourself and to your board:
always ensure that your system is turned off and unplugged whenever
you are working with it, and that you are equipped with a static safety
device.
!
important!
procedure
1.
2.
3.
warning
http://www.tyan.com
6
Chapter 1
Introduction
HardwareSpecifications/Features
Processor Information sOne SEC slot (Slot One type).
sPentium II 233-333MHz.
sSupports Celeron CPUs.
sOne VRM component installed
onboard.
sOnboard CPU fan header.
Chipset Information sIntel 440EX AGPset.
sIntel PIIX4 controller.
sITE 8679 Super I/O chipset.
Voltage and Power sATX power supply connector.
Information s+12V power source for DC fan
onboard.
s3.3V DRAM support.
sUtilizes GTL+ bus to reduce power
consumption and EMI.
sPower recovery after interrupt.
sWindows 95 soft power down.
Main Memory sUp to 512MB EDO or SDRAM
onboard.
sTwo 168-pin DIMM sockets.
sEDO and SDRAM (with SPD)
support (3.3V).
System Management sWake-on LAN 3-pin header for
remote booting by system
administrator (ATX 2.01 compliant
power supply required).
sOptional National LM81 ASIC to
monitor voltage, temperature, and fan
speed.
sChassis intrusion detection capable
(with LM81).
http://www.tyan.com
7
INTRO
sIntel LANDesk Client Manager
software and/or Intel LANDesk
Server Manager software (with LM81
installed).
Expansion Slots sOne 32-bit AGP slot (supports 1X
and 2X).
sTwo 32-bit PCI bus master slots.
sTwo 16-bit ISA slots.
sOne shared PCI/ISA slot, four
usable.
Physical Dimensions sSmaller than MicroATX design.
s9.6 inches x 7.1 inches.
sDouble row ATX connectors.
BIOS Information sAward Plug and Play flash BIOS.
sDeep Green, Energy Star, PC98,
Year 2000 compliant.
sMultipleboot options.
Disk Drive & System I/O sTwo PCI bus mastering EIDE
channels.
sSupports EIDE CD-ROMs.
sPIO Mode 3 & 4 (up to 17MB/sec
DTR).
sUltraDMA/33 bus mastering mode
(up to 33MB/sec DTR).
sSupport for two floppy drives
(2.88MB & 3 Mode support).
sTwo serial ports (16550 UARTs).
sOne ECP/EPP parallel port.
sOne IR (InfraRed) I/O interface port.
sTwo USB rev 1.2 ports.
sOne PS/2 mouse port.
sOne PS/2 keyboard port.
http://www.tyan.com
8
Chapter 1
Introduction
Creative Sound sOPTi 82C933 chip.
(optional) sSound Blaster Pro, Ad Lib, Windows
95compatible.
sMicrosoft PC97 compliant.
sPnP 3D stereo sound with 64-bit
software wavetable.
Warranty s3 year manufacturer’s warranty.
SoftwareSpecifications
OS sOperates with MS-DOS, Windows
3.x, Windows for WorkGroups 3.x,
Windows 95, Windows 98, Windows
NT, OS/2, Novell Netware, Solaris,
and SCO Unix.
Information presented in this publication has been carefully checked for
reliability. However, no responsibility is assumed for inaccuracies. The
information contained in this document is subject to change without
notice.
Technical Support
If a problem arises with your system, you should turn to your dealer for
help first. Your system has most likely been configured by them, and
they should have the best idea of what hardware and software your
system contains. Hence, they should be of the most assistance. Further,
if you purchased your system from a dealer near to you, you can
actually bring your system in to them to have it serviced, instead of
attempting to do so yourself (which can have expensive conse-
quences). If your dealer is unable to assist you,
try our web page, http:// www.tyan.com
user newsgroup, alt.comp.periphs.mainboard.tyan
technical support phone line, (510) 440-8808
http://www.tyan.com
9
ReturningMerchandiseforService
During the warranty period, contact your distributor or system vendor
FIRST for any product problems. This warranty only covers normal
customer use and does not cover damages incurred during shipping or
failure due to the alteration, misuse, abuse, or improper maintenance of
products.
For Resellers Only:
A receipt or copy of your invoice marked with the date of purchase is
required before any warranty service can be rendered. You can obtain
service by calling the manufacturer for a Return Merchandise Authori-
zation (RMA) number. The RMA number should be prominently
displayed on the outside of the shipping carton and the package should
be mailed prepaid, or hand-carried to the manufacturer. TYAN will pay
to have the board shipped back to you.
Trademarks
EliteBIOS is a trademark of Award Software Incorporated.
Windows is a trademark of Microsoft Corporation.
IBM, PC, AT, PS/2 are trademarks of IBM Corporation.
INTEL, Pentium II, Celeron are trademarks of Intel Corporation.
S1694SA/L Tigercub is a trademark of TYAN Computer Corporation.
All other trademarks are the property of their respective companies.
Disclaimer
Information presented in this publication has been carefully checked for
reliability. However, no responsibility is assumed for inaccuracies. The
information contained in this document is subject to change without
notice.
INTRO
http://www.tyan.com
10
Chapter 2
Board Installation
chapter 2
Board Installation
Unpacking
The mainboard package should contain the following:
·S1694SA/L Tigercub mainboard
·One 40-pin IDE cable
·One 34-pin floppy cable
·User’s manual
·One CPU retention module
·Creative/Ectiva sound CD (optional, includes installation guide).
·One LANDesk CD (optional)
Installation
You are now ready to install your mainboard. The mounting hole
pattern of the S1694SA/L matches the Micro ATX system board
specifications. The S1694SA/L will fit in a Micro ATX or a standard
ATX chassis.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Placa madre de TYAN
TYAN
TYAN TRINITY I845E Manual de usuario
TYAN
TYAN Tigercub 100 S1894 Manual de usuario
TYAN
TYAN TOMCAT N3400B Manual de usuario
TYAN
TYAN THUNDER K7 Manual de usuario
TYAN
TYAN S7053 Manual de usuario
TYAN
TYAN TIGER 200 Manual de usuario
TYAN
TYAN S7025 Manual de usuario
TYAN
TYAN S8028 Manual de usuario
TYAN
TYAN TOLEDO I3000R Manual de usuario
TYAN
TYAN THUNDER K8SR Manual de usuario
TYAN
TYAN TEMPEST I5000VF Manual de usuario
TYAN
TYAN THUNDER N6650W Manual de usuario
TYAN
TYAN Tiger MPX S2466 Manual de usuario
TYAN
TYAN S5545 Manual de usuario
TYAN
TYAN S5533 Manual de usuario
TYAN
TYAN TEMPEST I5000PW Manual de usuario
TYAN
TYAN Thunder K8WE S2895 Instrucciones de instalación y funcionamiento
TYAN
TYAN TIGER GC-SL Manual de usuario
TYAN
TYAN Tomcat K8E-SLI S2866 Manual de usuario
TYAN
TYAN Tempest i5000VS S5372-LC Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
