TV One CORIOmaster2 MK2 Manual de usuario
Firmware versionV600and above
QSG-CM2-547-MK2-V1.0
Aug 2023
CM2-547-MK2 CORIOmaster2™ MK2
CORIOgrapher™ V4.0 and above
Quick Start Guide V1.0
About CORIOgrapher™
CORIOgrapher is the software that controls your CORIOmaster2™. You
can create up to three video installations, with multiple screens and
windows, and add transitions and effects for a state-of-the-art dynamic
video installation.
CORIOgrapher system requirements
CORIOgrapher:
nWorks with PCs running Windows® 10 and 11
nDoes not work with touch-screen-only devices, including tablets or
phones
nWorks with Microsoft Surface Pros and similar touch screen devices
Full support for touch screen devices is under development
nInstalls Windows .NET 7, if you don't have it
nNeeds 600MB of disk space during installation
nIs approximately60 MB in size once installed
To use the preview feature, your PCmust have Windows Media Player
installed, and it must have been launched at least once. Preview
performance depends on the specifications of your PC and number of
windows in your installation.
CORIOgrapher main areas
Home
Home is where you connect to a device, load
a configuration from a file, or create an offline
configuration.
Editor
CORIOmaster and CORIOmaster2 only.
Editor is where you create your installations
on each canvas.
nIf you have a CORIOmaster or
CORIOmaster mini, you can create up to
four canvases.
nIf you have a CORIOmaster micro, you
can create up to two canvases.
nIf you have a CORIOmaster2, you can
create up to three canvases.
Dashboard
Dashboard is where you control the actions
of your canvases.
Standby
CORIOview and CORIOmaster micro only.
Standby puts your device into standby mode.
Help
Help opens tvONE help for your product.
Settings
Settings is where you configure your system,
network, modules, and more.
Hardware recommendations
At tvONE, we design our products to the highest quality standards. To get
the best results from our products, we recommend that you use the best
quality connectors, cables, and adapters. Consider the points below
when you choose accessories and position equipment.
nFor best results at resolutions of 1080p60 or below with HDMI or DVI,
use cables under 15m long, or shorter if you use connection
adapters. If you need to place your products more than 15m apart,
use active optical cables or a signal extender.
For best results at resolutions of 4K60 or higher with HDMI, use
cables under 2-3 m, or shorter if you use connection adapters. If you
need to place your products more than 3 m apart, use active optical
cables or a signal extender.
See our range of active optical cables and signal extenders at
help.tvone.com/r/docs/g/signal-extension.
nFor best results with HDMI, use High Speed, Premium High Speed, or
Ultra High Speed HDMI cables.
nFor best results with DisplayPort, use certified cables under 2 m long.
nIn industrial environments, use shielded Ethernet cables.
Shielded Ethernet cables are often marked F/UTP, FTP, or STP. Use
shielded Cat 6 or above cables with HDBaseT input and output
modules and Streaming media and 4K playback input modules.
nUse good quality USB 3.0 drives.
nFor more hardware recommendations for your product, see the
specification sheet.
Read more about HDMI at hdmi.org.
Read more about DisplayPort at displayport.org.
1 tvONE
About your CORIOmaster2™ MK2
Thanks for buying this CORIOmaster2, our latest all-in-one, multi-
window video processor. CORIOmaster2 connects to a wide range of
sources and displays, and works with CORIOgrapher™ software to allow
you to build dynamic video installations with an easy-to-use visual
interface.
CORIOmaster2 front panel
The front panel of your CORIOmaster2 includes a customizable status
screen. The status screen can show the IP address of your
CORIOmaster2, its status, and the name of the device.
QSG-CM2-547-MK2-V1.0 2
CORIOmaster2 rear panel
Input module (blue) Connect to sources
Output module (white) Connect to displays
Bonding module Used to fill empty slots in a group
Optional audio
module
Optional: connect to audio sources
and/or playback devices
CPU module
Connect to your network with
Ethernet
Optional: connect to serial controller
with RS-232
Optional: connect directly to a PC
with Ethernet or RS-232
Power supply unit
(PSU) Connect to electrical outlet
Optional second PSU,
sold separately Optional: connect to electrical outlet
3 tvONE
Quick start
This Quick Start Guide gives you an overview of the steps involved in
setting up a video installation with your CORIOmaster2™ hardware and
CORIOgrapher™ software.
It's easy to get started with your CORIOmaster2, but if you want more help with
any of these steps, or with using the features of CORIOgrapher, select in
CORIOgrapher and search, or ask a question. Or visit help.tvone.com/r/docs/cm2-
mk2/home/1.
1. Plan your installation. What do you want your installation to look like?
What equipment do you need to achieve this?
At the back of this guide is a plan that you can fill out.
2. Install your hardware.
a. Position your displays or projectors.
b. Connect your displays and sources to your output and input
modules. Connect the LAN port of the CPU module to your
network.
Video tearing
Using a mixture of frame rates and/or resolutions can cause video
tearing. For best results, make sure all your displays use the same frame
rate.
c. Power on your CORIOmaster2.
3. Install CORIOdiscover and CORIOgrapher.
Download the latest version of CORIOdiscover and CORIOgrapher
from help.tvone.com/r/docs/g/software.
QSG-CM2-547-MK2-V1.0 4
4. Open CORIOgrapher and select your CORIOmaster2.
Enter your username and password to log in, and if prompted select
Read to load your configuration.
nThe first time you log in, if available make sure the Secure option
is cleared.
nThe default username is admin, and the default password is
adminpw.
5 tvONE
If you aren't connected to a CORIOmaster2, you can create an offline
configuration for your device.
The media player of the Streaming media and 4K playback input module is
not available when you work in an offline configuration.
5. Optional: enable secure mode.
a. Select Settings >Networking.
b. Select Secure connection.
c. Select Save >Yes.
CORIOmaster2 restarts.
d. If available, select Secure and log in.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Convertidor de medios de TV One
TV One
TV One 1T-AP-216 Manual de usuario
TV One
TV One 1T-HDMI-DVI Manual de usuario
TV One
TV One 1T-C2-100 Manual de usuario
TV One
TV One 1T-AP-216 Manual de usuario
TV One
TV One 1T-C2-750 Manual de usuario
TV One
TV One C2-2000 Series Manual de usuario
TV One
TV One C2-2855 Manual de usuario
TV One
TV One 1T-DVI-VGA Manual de usuario
TV One
TV One A2-7312 Manual de usuario
TV One
TV One 1T-VGA-DVI Manual de usuario
TV One
TV One CORIOmaster Manual de usuario
TV One
TV One C2-2000 Series Manual de usuario
TV One
TV One C2-2855 Manual de usuario
TV One
TV One 1T-VS-624 Manual de usuario
TV One
TV One 1T-V1280HD Manual de usuario
TV One
TV One 1T-AVPC-HDMI Manual de usuario
TV One
TV One 1T-VS-558 Manual de usuario
TV One
TV One C2-1000 Series Manual de usuario
TV One
TV One 1T-C2 Series Hoja de especificaciones
TV One
TV One CORIOmaster mini Manual de usuario
