TV Logic XVM-175W Manual de usuario

17” Multi Format LCD Monitor

XVM-175W

Multi Format

LCD MONITOR

Service Manual

Caution

•Always use set voltage.

- AC 100 ~ 240V (1.6A/50~60Hz)

- DC 12V(MAX 3.5A)

• All operating instructions must be read and understood before the products is operated.

• These safety and operating instruction must be kept in safe place for future reference.

• All warning in this instruction must be observed closely and be followed.

• Do not use attachments not recommended by the manufacturer. Use of inadequate attachments

can result in accidents.

• If you are not sure of the type of power supply used in your home, consult your dealer or local

power company. For units designed to operate on batteries or another power source, refer to the

operating instruction.

• The power cord must be routed properly to prevent people from stepping on them or objects

from resting on them. Check the cords at the plugs and products.

• Do not overload DC outlets or extension cords. Overloading can cause fire or electric shock.

• Do not attempt to service the products yourself. Removing covers can expose you to high voltage

and other dangerous conditions. Request a qualified person to perform servicing.

• If any of the following conditions occurs, unplug the power cord from the DC outlet, and request a

qualified service person to perform repairs.

a. When the power cord or plug in damaged.

b. When a liquid was spilled on the products or when objects have fallen into the products.

c. When the products have been exposed to rain or water.

d. When the products have been dropped or damaged.

e. When the products display an abnormal condition. Any noticeable abnormality in the products

indicate that the products need servicing.

• Upon completion of service of repair work, request the service technician to perform safety checks

to ensure that the products is in proper operating condition.

• Keep the products away from direct rays of the Sun-light.

• Do not place the products on an unstable cart, stand, tripod or table. Placing the products on an

unstable base can cause the products to fall.

• When you disassemble the products, you lay smooth fabric so that the products keep away from

scratch.

• When you assemble the products, you set the electronic screwdriver’s torque as less than 2k and

screw each bolt and check if the cables connect properly. Setting the torque as more than 2k can

cause the case broken.

Part Name & Function

XVM-175W : Front

XVM-175W : Rear

Drawing

Exploded View

DVI ANALOG/DVI DIGITAL/HDMI support resolution

Resolution Frequency

640 ×480 60Hz, 75Hz

720 x 400 70Hz

800 ×600 60Hz, 72Hz, 75Hz

1024 ×768 60Hz, 70Hz, 75Hz

1366 x 768 60Hz/75Hz

1280 x 1024 60Hz/75Hz

1600 x 1200 60Hz

1920 x 1080 60 Hz

• DVI-ANALOG mode support resolution :

SMPTE-274M 1080i (60 / 59.94)

SMPTE-296M 720p (60 / 59.94)

SMPTE-125M 480i (59.94), 480p(59.94)

•DVI DIGITAL Video mode support resolution :

•DVI DIGITAL/HDMI is divided into graphic and video mode.

•DVI ANALOG/DIGITAL/HDMI mode, when scan is not zero scan, the picture may not be output

properly.

• When output image is not wide mode but aspect mode, the image is output by pressing ASPECT

button.

Resolution Frequency

640 ×480 60Hz, 75Hz

800 ×600 60Hz, 72Hz, 75Hz

1024 ×768 60Hz, 70Hz, 75Hz

1366 x 768 60Hz/75Hz

1280 x 1024 60Hz/75Hz

1600 x 1200 60Hz

1920 X 1080 60hZ

1920 x 1200 60 Hz

DVI ANALOG/DIGITAL Support Resolution

Product Specification

* Above specifications may be changed without notice

Input

1 x DVI-I DVI IN

3 x BNC Analog Input

2 x BNC SDI A/B Channel Input

1 x HDMI HDMI Input

1 x BNC EXT SYNC INPUT

Output

3 x BNC Analog Output

2 x BNC SDI A/B Channel (Active Through Out)

1 x BNC EXT SYNC OUT(Active Through Out)

Input Signal

Analog Composite / S-Video / Component / RGB

3G-SDI 2.970Gb/s

HD-SDI 1.485Gbps

SD-SDI 270Mbps

DVI VESA/IBM Modes

HDMI 480i/480p/720p/1080i /1080p

Analog Input Spec

Composite 1.0Vpp (With Sync)

S-Video 1.0Vpp (Y With Sync), 0.286Vpp(C)

Component 1.0Vpp (Y With Sync), 0.7Vpp (Pb,Pr)

RGB 1.0Vpp (G With Sync), 0.7Vpp (B,R)

SDI Input Signal Formats

SMPTE-425M-A/B 1080p (50/59.94/600)

SMPTE-372M

Dual HD-SDI YPbPr (4:2:2) 1080p (50 / 59.94 / 60)

Dual HD-SDI YPbPr/RGB (4:4:4) 1080i (50 / 59.94 / 60)

1080p/psf (30 / 29.97 / 25 / 24 / 23.98)

SMPTE-274M 1080i (60/59.94/50)

1080p (30/29.97/25/24/24sF/23.98/23.98sF)

SMPTE-296M 720p (60/59.94/50)

SMPTE-260M 1035i (60/59.94)

SMPTE-125M 480i (59.94)

ITU-R BT.656 576i (50)

Audio In Embedded Audio / Analog Stereo (Phone Jack)

Audio Out Analog Stereo (Phone Jack)

LCD SPEC

Size 17”

Resolution 1920*1080

Dot Pitch 0.199mm * 0.199mm

Color 10-bit 1.07B color

Viewing Angle (Typical) R/L, U/D 178°

Luminance of white 300 cd/m

Contrast 800:1

Display Area (H)381.9mm (V)214.8mm

Power AC100~240V

Power Consumption (Approx.) 77 Watts(AC / Typ.)

Operating Temperature 0°C to 40 °C (32°F to 104 °F )

Storage Temperature -20 °C to 60 °C (-4 °F to 140 °F )

Main Body Dimensions (mm/inch) 445x264x66 (17.52x10.39x2.6)

Main Body Dimensions (With Stand) 492.2x288.8x137.5 (19.38x11.37x5.41)

Weight 6.4kg(14.08lbs)

Accessory AC Power Cord / Stand

Option Carrying Case, Rack Mountable Kit(With OSD Cover), V-mount, Gold mount,

Sun hood

PCB Block Diagram

Circuit Operation Progress

•SDI Equalizer + Deserializer sends out YUV(4:2:2) 20bit digital Signal fed SD/HD-SDI. 20bit Signal as

in output sends out audio Signal.

•HDMI S/W, ADC(HDMI+ADC -Input) sends out 8bit 2ch R,G,B data selected DVI or HDMI signal.

YPbPr(480p,720p,1080i-Input) sends out 30bit 2ch R,G,B data via A/D CONVERTER.

•Analog R,G,B(IBM,VESA -Input) is sent out 30bit 2ch R,G,B data via A/D CONVERTER.

•ALTERA FPGA A makes DIGITAL Signal switching then send out ALTERA FPGA B.

In Fast Mode, it sends out ALTERA FPGA B by deinterlacing without using Scaler.

It sends out I2S Signal in H part by extracting Audio signal on SD/HD-SDI..

•3D-ROM handles with CVBS1~3.

•HDMI, DVI, RGB, and YPbPr don’t get a signal at the same time.

•After changing Digital signal into Analog one, Audio AMP(LM4849) amplifies audio then puts out

Audio Out(J16).

•SAMSUNG K4S641632H-UC75 memory is used for 3D-COM.

•Serial Flash Memory is a device that saves images and loads them when they are needed.

•CPU controls whole circuit.

•Temperature sensor and keys are under CPU control.

•Scaler/Deinterlace have 4 of DDR, save images, and load them whenever needed.

•PCF8574 ‘s role is to extend I/O port.

•GPI Remote(J23) consis of parallel switch then control monitors the outside.

•GPI IN/OUT(J21, J22) controls protocol monitors or supports TSL protocol.

•EXT. SYNC Generater takes out SYNC on Analog signal, makes CLK,H,V F, and puts out FPGA.

•Ethernet Module is for Program Download and Calibration by connecting an Ethernet Cable with

I2C signal.

•[Ethernet & USB]

- Updates new firmware such as features, debugging.

•~ AC IN

- AC 100 ~ 240V (1.6A/50~60㎐)

- DC 12V(MAX 3.5A)

Circuit Operation Progress

- You can set the functions of pins 1~6 as the following:

- Each pins is located as below.

Connector Composite Component S-Video

1 CVBS 1 Y G Y

2 CVBS 2 Pb B No Con.

3 CVBS 3 Pr R C

Menu Classification Settable Values

PIN 1~6

NONE, ANALOG CHANNEL, SDI-A CHANNEL, SDI-B CHANNEL, PBP

CHANNEL, TALLY R, TALLY G, UNDER SCAN, 1:1 SCAN, ASPECT, H/V

DELAY, BLUE ONLY, MONO, 16:9 MARKER, 4:3 MARKER, 4:3 ON AIR

MARKER, 15:9 MARKER, 14:9 MARKER, 13:9 MARKER, 1.85:1 MARKER,

2.35:1 MARKER, 1.85:1&4:3 MARKER, CENTER MARKER, SAFETY AREA

80%, SAFETY AREA 85%, SAFETY AREA 88%, SAFETY AREA 90%,

SAFETY AREA 93%, SAFETY AREA 100%, 708, 608(LINE21), 608(ANC),

OP47

PIN 7 POWER ON/OFF CONTROL

PIN 8 GND

- How to connect analog video signal

Otros manuales para XVM-175W

Tabla de contenidos

Otros manuales de Monitor de TV Logic

TV Logic

TV Logic F-7H mk2 Manual de usuario

TV Logic

TV Logic FCM-400W Manual de usuario

TV Logic

TV Logic XVM-245W Manual de usuario

TV Logic

TV Logic LVM-091W Manual de usuario

TV Logic

TV Logic LVM-071W Manual de usuario

TV Logic

TV Logic LVM-241S Manual de usuario

TV Logic

TV Logic LVM-174W Manual de usuario

TV Logic

TV Logic LUM-310A Manual de usuario

TV Logic

TV Logic TDM-243W Manual de usuario

TV Logic

TV Logic LVM-171WP Manual de usuario

TV Logic

TV Logic XVM-325W Manual de usuario

TV Logic

TV Logic F-5A-AG Manual de usuario

TV Logic

TV Logic PRM-502LE Manual de usuario

TV Logic

TV Logic LUM-171G Manual de usuario

TV Logic

TV Logic FCM-461W Manual de usuario

TV Logic

TV Logic LQM-241W Manual de usuario

TV Logic

TV Logic LEM-150 Manual de usuario

TV Logic

TV Logic LVM-171S Manual de usuario

TV Logic

TV Logic S-32P Manual de usuario

TV Logic

TV Logic LUM-550M Manual de usuario

TV Logic

TV Logic Multi LVM-171S Manual de usuario

TV Logic

TV Logic LQM-241W Manual de usuario

TV Logic

TV Logic SWM-171A Manual de usuario

TV Logic

TV Logic LVM-074W Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación