TUYA S1-TYB Manual de usuario
Special Attention:
1. Mechanical keys please keep outdoor, just in case keys lock in doors.
2. Please replace for the battery when low wattage alarm.
3.Reading this manual carefully before installation, and keep it for future reference.
Smart Lock
S1-TYB
User Manual
1
1. Introduction
1.1.Lock structure
1.2.Packing List
Check the following drawing to check whether the package contains all the parts
NO
Name
Qty
NO
Name
Qty
1
Front Pane
1
12
Sliding Screws:M5*10mm
2
2
Back Panel
1
13
Mortise Screws:10*5mm
(For Aluminum Door)
4
3
Mortise
1
14
Mortise Screws:25*4mm
(For Wooden Door)
4
4
Card
3
15
M5*25mm Screw
1
5
Mechanical Key
2
16
M5*30mm Screw
1
6
Waterproof Rubber Plate
2
17
M5*40mm Screw
1
7
U-Clip
1
18
M5*50mm Screw
1
8
User Manual
1
19
M5*60mm Screw
1
9
Strike&Strike Box
1+1
20
M5*70mm Screw
1
10
Screw Stubs:M5*30mm
2
21
60mm Square shaft
1
11
Screw Stubs:M5*35mm
2
22
80mm Square shaft
1
2
1.3.Specifications
Suitable for
Models
S1-TYB
Doors
Applicable
Aluminum door
Wooden door
Materials
Handle：SS304
Panel：Aluminum alloy
Working
Voltage
6V/4x AA Batteries
Lock
Weight
2.5KG
Door
Thickness to
Fit
35-65mm
Unlocking
Way
Bluetooth
Fingerprint(option)
Password
Card
Mechanical key
Gateway(option)
Data
Capacity
Fingerprint+Password
+Card≤100
Color
Silver
Black
Working
Temperature
-10℃-55℃
Low
Wattage
Alarm
Less than 4.8V
Working
Humidity
0-95%
System Initialization
Open the cover plate of the front
panel ,long press the "Reset" button
on the back panel for 5s,the
initialization is complete
3
2.Installation
2.1Turn the handle
Notice: Adjust the handle according to the direction you open the
door.
4
2.2. Installation Diagram(For 3585)
Step 1 Install Mortise
Step 2 Install Sliding Screw Casing and Square Shaft
1.Choose a screw column suitable for the thickness of the
door install it on the front panel,
2.Install waterproof in alignment with the holes
3.Install the square shaft, put on the U-Clip, The arrow is in
the same direction as the handle
Step 3 Install Front Panel
1.Align the front panel of the installed accessories with the
holes of the door and install
1.According to the size indicated by
the hole icon, open the corresponding
hole position as needed, and install the
lock body.
2.Adjust the direction of the bolt
according to the door opening
direction
5
Step 4 Install Back Panel
1.Install another waterproof pad to the rear panel
Step 5 Connect Front and Back Panels Wires
1. Fix the front and back panels with screws
suitable for the thickness of the door
2. Connect the front power cord to the back
panel
Step 6 Install the Battery
1.Install 4* AA batteries
2.Install the battery cover
6
3.Operation
3.1.Download
3.2.Register
1.Click “Sign Up”and read the Privacy Policy after it pops up. Click “Agree”
and enter the registeration page.
2.You can use email or mobile number as your
account to register. The country/region of the APP will
be the same as the phone's. You can also change it by
yourself when registering.（You cannot change the
country/region after the registeration). Enter mobile
number/email and click”Get Verification Code”；
3.Enter the verification code and turn to the password
setting page. Set your password as required and click
“Done”.
3.3.Log in
If you already have an account,choose “Register with Existing Account”and
enter the log in page.
1）.The system will automatically locate the current country/region you are in.
Or you can choose the country/region by yourself.
2）.Enter mobile number/ email and password.
-Thirdy-party Social Account Log in
If you have downloaded Wechat or QQ on your phone, you can click the
Wechat/QQ icon in the log in page. You can log in using your wechat/QQ account
after authorizing it.If you are using iPhone,you can also log in with Apple ID.
You can search for [ Tuya Smart ] in
various app stores or scan the QR
code above to download
7
3.4.Add lock
3.4.1. Interface introduce
1.Tap Add Device on the Home page or“+”in the upper right corner of the page
to go to the Add Device page. then, you can manually add devices or search for
devicesto add to the app.
2.Click on the "security sensors" category on the left ，Find the door lock
(Bluetooth)
3.Press 8+# on the lock and Prompt operation is successful, the keyboard light
starts flashing，the lock will enter bluetooth search status
4.After searching for the door lock, click "+" to add
8
Two different kinds of members
1. Family members-this type of member is consistent with the
users in the family group in the app; when a new user is added to
the family group in the app, one more family member will appear in
the door lock member. Note: Delete family members can only be
operated in the family member management of the app
2. Other members-refers to users who only appear in the door
lock, not users in the app family group. Adding or deleting such
users will not affect the members of the app family group
Family members management and Other
members management
1.Validity period: Once added, the family member's use time
permission is permanent, and the member has the corresponding
use permission until the administrator deletes the member
2.Door opening method: the administrator can determine the
type of permission the member has to open the door; if the
administrator closes all the door opening permissions of the
member, the user can no longer maintain his own door opening
method through the app, and can only use the existing door
opening method the way
Other members management
1. Validity period: The administrator can determine the length
of the validity period for other members. It can be set to be
permanently effective, or a specified start time-end time can be set.
2.Door opening method. The administrator can determine the
type of permission for the member to open the door;(Same as
family members)
3.After creating another member, the administrator can
associate the member with a user of the app through the "share"
operation. When the user’s specified end time is reached, the user’s
app will automatically lose the device
3.5.Add user
3.5.1.Members and management
9
3.5.2.Opening record
3.6.Set unlock mode
3.6.1.Fingerprint management
You can query the log in the door opening log, and the
records are arranged in reverse order. The unlock ID that has
been associated with the user name will directly display the
corresponding user name, and the unlock ID that has not been
associated with the name will display the specific unlock ID
About the opening log display:
When the door lock is connected to the mobile phone
Bluetooth, the door opening record will be displayed to the APP
in real time, otherwise the record will be cached locally in the
door lock, waiting for the next time the door lock is connected
with the mobile phone Bluetooth and the door is opened for
supplementary transmission;
A.Homepage setting entrance-you can set
fingerprint, password, card, temporary password,
automatic lock and volume setting。
B.If you turn on the automatic lock setting, it will
be automatically locked five seconds after
unlocking. If you turn off this setting, the lock is in
normally open mode
By connecting the door lock via Bluetooth
app, the administrator can collect fingerprints for
himself or other family members;Before
collecting,select the user corresponding to the
fingerprint to be added.Click "Start Collection" to
enter the fingerprint collection interface, each
fingerprint collection needs to enter five times
fingerprints
Tabla de contenidos
Otros manuales de Cerrar de TUYA
