turck BCT Series Manual de usuario
Your Global Automation Partner
Operating Instructions
BCT-…
Teachable Capacitive
Sensors
2
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
1 About These Instructions 5
1.1 Target groups 5
1.2 Explanation of symbols 5
1.3 Other documents 6
1.4 Feedback about these instructions 6
2 Notes on the Product 7
2.1 Product identication 7
2.2 Scope of delivery 7
2.3 Legal requirements 7
2.4 Manufacturer and service 8
3 For your safety 8
3.1 Intended use 8
3.2 Obvious misuse 8
3.3 General safety notes 8
4 Product description 9
4.1 Device overview 9
4.1.1 Indication elements 9
4.1.2 Operating elements 9
4.2 Properties and features 10
4.3 Operating principle 10
4.4 Functions and operating modes 10
4.4.1 Setting options 10
4.4.2 “Medium present” mode (Full teach) 10
4.4.3 “Medium not present” mode (Empty teach) 10
4.4.4 “Switch point between medium present and medium not present” mode
(Complete teach) 11
4.4.5 Internal voltage and temperature monitoring 11
4.5 Technical accessories 11
5 Mounting 13
6 Connection 14
6.1 Wiring diagrams 14
7 Commissioning 14
8 Operation 15
8.1 Operation in IO-Link mode – LED indication 15
9 Setting 16
9.1 Setting via the teach adapter 16
9.2 Setting by manual bridging (shorting) 17
9.3 Setting via pushbuttons 18
9.4 Setting via IO-Link 19
9.4.1 IO-Link parameters 20
9.5 Example of use: Adjust sensor for poorly detectable media 20
3
2016/09
BCT-... Capacitive Sensors
10 Troubleshooting 21
11 Maintenance 21
12 Repair 21
12.1 Returning devices 21
13 Decommissioning 21
14 Disposal 21
15 Technical Data 22
4
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
5
2016/09
BCT-... Capacitive Sensors
1 About These Instructions
These instructions describe the setup, the functions and use of the device and help you to oper-
ate the product for its intended use. Read these instructions carefully prior to using the product.
Keep these instructions safe during the service life of the device. If the product is passed on,
pass on these instructions as well.
1.1 Target groups
This document is written for specially trained personnel and must be read carefully by anyone
who is charged with the mounting, commissioning, operation, maintenance, disassembly or
disposal of the device.
1.2 Explanation of symbols
The following symbols are used in these instructions:
DANGER
DANGER indicates a direct hazardous situation with the risk of death or serious injury if
it is not prevented.
WARNING
WARNING indicates a possible hazardous situation with the risk of death or serious
injury if it is not prevented.
NOTICE
NOTICE indicates a situation that may cause possible damage to property if it is not
prevented.
NOTE
NOTE indicates tips, recommendations and important information. The notes contain
information, particular operating steps that facilitate work and possibly help to avoid
additional work resulting from incorrect procedures.
➤MANDATORY ACTION
This symbol denotes actions that the user must carry out.
➥ RESULT OF ACTION
This symbol denotes the relevant results of actions and procedures.
6
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
About These Instructions
1.3 Other documents
Besides this document the following material can be found on the Internet at www.turck.com:
■Data sheet of the particular device
■IODD file
■IO-Link Parameters Manual
All Turck software components and the IODD can be downloaded via the Turck
Software Manager. The Turck Software Manager can be downloaded free of charge at
www.turck.com.
1.4 Feedback about these instructions
We make every effort to ensure that these instructions are as informative and as clear as pos-
sible. If you have any suggestions for improving the design or if some information is missing in
7
2016/09
BCT-... Capacitive Sensors
2 Notes on the Product
2.1 Product identication
Teachable capacitive sensors
BCT5-S18-UP6X2T-H1151 BCT10-S30-UP6X2T-H1151
BCT5-S18-UN6X2T-H1151 BCT10-S30-UN6X2T-H1151
BCT5-S18-UP6X2-H1151 BCT10-S30-UP6X2-H1151
BCT5-S18-UN6X2-H1151 BCT10-S30-UN6X2-H1151
2.2 Scope of delivery
The scope of delivery consists of the device and two nuts for mounting.
2.3 Legal requirements
The product is subject to the following EC directive:
■2014/30/EC (EMC Directive)
The EC declaration of conformity is available for download from the Turck product database.
B C T 10 –S30 –U P 6 X2 –H1 1 5 1
B C T 10 Functional principle –
Rated operating distance
…switching distance
Sn in [mm]
Special functions
Tteachable
Functional principle
Ccapacitive
Installation
Bflush
S30 Design –
Housing
S18 cylinder, plastic,
continuous thread Ø 18 mm
S30 cylinder, plastic,
continuous thread Ø 30 mm
U P 6 X2 T Electrical version –
Teach button
T teach button
Indication
X LED
2 number of LEDs
Voltage range
610…30 VDC
Output type
N NPN output
P PNP output
Output function
U NO/NC programmable
H1 1 5 1 Electrical connection
Assignment
1standard assignment
or customized
Number of contacts
... number of contacts
Connector type
1straight
3straight, with adapter
Connector type
H1 M12 x 1 male
8
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
For your safety
2.4 Manufacturer and service
Turck supports you in your projects – from the initial analysis right through to the commission-
ing of your application. The Turck product database offers you several software tools for pro-
gramming, configuring or commissioning, as well as data sheets and CAD files in many export
formats. You can access the Product Database directly via the following address:
www.turck.de/products
For further inquiries in Germany contact the Sales and Service Team on:
Sales: +49 208 4952-380
Technical: +49 208 4952-390
For overseas inquiries contact your national Turck representative.
Hans Turck GmbH & Co. KG
Witzlebenstraße 7
45472 Mülheim an der Ruhr
Germany
3 For your safety
The product is designed according to the latest state of the art technology. Residual hazards,
however, still exist.
Observe the following warnings and safety regulations in order to prevent danger to persons
and property.
Turck accepts no liability for damage caused by failure to observe these safety instructions.
3.1 Intended use
The devices are only designed for use in industrial applications.
The capacitive sensors are intended for the contactless detection of the presence of solid or liq-
uid objects. Any other use is not in accordance with the intended use; Turck accepts no liability
for any resulting damage.
3.2 Obvious misuse
The devices are not safety components and must not be used for the protection of persons or
property.
3.3 General safety notes
■The devices only meet the EMC requirements for industrial areas and are not suitable for use
in residential areas.
■The device must only be fitted, installed, operated and maintained by trained and qualified
personnel.
■Only use the device in compliance with the applicable national and international regulations,
standards and laws.
■Not all objects are detected equally well by the sensor. Before regular operation check
whether the required object is detected.
9
2016/09
BCT-... Capacitive Sensors
4 Product description
4.1 Device overview
The capacitive sensors have a cylindrical design with an M18 or M30 male thread. The device
front can be mounted flush with the surrounding area. All devices are provided with an M12
connector for connecting the sensor cable.
LED
Teach (T2)
Teach (T1)
24/8
50
87,3
M18 x 1
M12 x 1
LED
24/8
50
87,3
M18 x 1
M12 x 1
Fig. 1: Dimension drawings BCT5-S18-U*6X2T-H1151 (with teach button) and BCT5-S18-
U*6X2-H1151 (without teach button)
LED
Teach (T2)
Teach (T1)
36/10
50
87,3
M30 x 1,5
M12 x 1
LED
36/10
50
87,3
M30 x 1,5
M12 x 1
Fig. 2: Dimension drawings BCT10-S30-U*6X2T-H1151 (with teach button) and BCT10-S30-
U*6X2-H1151 (without teach button)
4.1.1 Indication elements
The capacitive sensors have a 2-color LED (green/yellow).
4.1.2 Operating elements
The capacitive sensors are available with and without integrated teach buttons. Refer to the
type code for the identification of the different device models.
10
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Product description
4.2 Properties and features
■Threaded barrel M18 x 1 or M30 x 1.5
■Flush mountable
■Plastic, PA12-GF30, PEI
■Setting via IO-Link, teach adapter, manual bridging or teach button
4.3 Operating principle
The sensors detect filling levels of liquids or solids - either in direct contact with the medium, or
through a non-metallic container wall. The capacitive sensors are also designed for the non-
contact and wear-free detection of both metallic (electrically conductive) and non-metallic
(electrically non-conductive) objects.
4.4 Functions and operating modes
When delivered, the device functions as a proximity switch with a rated operating distance of 5
mm (BCT5-S18- ...) or 10 mm (BCT10-S30 ...). Additional functions can be taught by the user.
4.4.1 Setting options
The devices can be set via IO-Link with FDT tools such as PACTware™ or via the PLC software.
The capacitive sensors are also provided with additional setting options:
■Setting via teach adapter (optional accessories, not included)
■Settings made via manual bridging via pin 5 to UB or pin 5 to GND
■Setting via pushbuttons (for models with teach buttons)
4.4.2 “Medium present”mode (Full teach)
In “Medium present” (Full teach) mode, the device operates with minimum sensitivity. This is
useful for applications with easy to detect media. A switch point is taught for when a medium
or an object is present in the sensing range of the sensor.
The switch threshold for the “Medium present” mode is automatically set so that a safety re-
serve is produced for the switchoff limit. The safety reserve can be set via FDT/IODD. The switch
point is below the measured capacitance. Environmental factors such as temperature devia-
tions, condensation, the formation of film or pollution have less effect on the signal in “Medium
present” mode. The switch point can be set with the “Medium present” teach button. The inter-
val between two teach operations can be set to any length as required.
4.4.3 “Medium not present”mode (Empty teach)
In “Medium not present” (Empty teach) mode the device operates at maximum sensitivity. Pos-
sible uses include applications in which pre-actuation by the environment must be prevented.
The switch point is taught when no medium or object is present in the detection range of the
sensor.
The switch threshold is automatically set for the“Medium not present”mode so that there is a
safety reserve for the switchoff limit. The safety reserve can be set via FDT/IODD. In this case, the
switch point is above the measured capacitance. Environmental factors such as temperature
deviations, condensation, the formation of film or pollution have less effect on the signal in
“Medium present” mode. The “Medium not present” teach enables the switch point to be set.
The interval between two teach operations can be set to any length as required.
Este manual sirve para los siguientes modelos
8
Tabla de contenidos
Otros manuales de Accesorios de turck
turck
turck FCS-GL1/2A4-NAEX-H1141 Manual de usuario
turck
turck RU D UPN8X2 Series Manual de usuario
turck
turck FCS-G1/2A4-NAEX0-H1141/L065 Manual de usuario
turck
turck Uprox+ NI50U-CK40-VP4X2-H1141/3GD Manual de usuario
turck
turck FCS-GL1/2A4-NAEX Manual de usuario
turck
turck LTX Series Manual de usuario
turck
turck PS Series Manual de usuario
turck
turck FCS-G1/2HC4-NAEX0/L065 Manual de usuario
turck
turck RU Series Manual de usuario
turck
turck RU10 M08 Series Manual de usuario
turck
turck RU100-CP40 Series Manual de usuario
turck
turck RU130U-M18E-LI8X2-H1151 Manual de usuario
turck
turck uprox + BI4U-EM12WD-AP6X-H1141/3GD Manual de usuario
turck
turck High-End Series Manual de usuario
turck
turck uprox BI6U-M12 Series Manual de usuario
turck
turck RU40U-M18E-LIU2PN8X2T-H1151 Manual de usuario
turck
turck PS310 Series Manual de usuario
turck
turck BI2-M12-Y1X-H1141 Manual de usuario
turck
turck FCS-GL1/2A4-NAEX/D100 Manual de usuario
turck
turck NIMFE-EM12/4,9L88-UP6X-H1141/S1182 Manual de usuario
Manuales populares de Accesorios de otras marcas
IFM Electronic
IFM Electronic Efector 250 Series Guía de referencia
DigiDesign
DigiDesign 888/24 I/O Manual de usuario
PROZIS
PROZIS QUAY Manual de usuario
patagonia
patagonia PSI Vest Manual de usuario
SFC Energy
SFC Energy EFOY GO! Manual de usuario
Axminster
Axminster Tooling Stylus Tip Ballpoint Pen Kit Manual de usuario