Turbolock TL116 Manual de usuario
In order to continue serving our customers and
providing the best products, our product information
including our user manuals may receive updates
from time to time. Please check our website for the
latest user manuals and product materials.
Version 1.0 8/26/19
www.turbolock.com
Customer Service: 855-850-8031
Section 1
Information & Safety Warnings 4
1.1 Introduction 4
1.2 Safety Warnings 4
1.3 End-of-Life Disposal 5
Section 2
Package Contents & Overview 6
2.1 Contents 6
2.2 Overview 6
2.3 Battery Information 7
2.4 Usage Overview 7
Section 3
Installation (Retrot) 8
3.1 Pre-Installation 8
3.2 Main Installation 10
Section 4
Installation (New) 12
4.1 Pre-Installation 12
4.2 Main Installation 16
Section 5
Using the Lock 18
Section 6
Keypad Passcodes 18
6.1 Changing the Admin Passcode 18
6.2 Adding Keypad Passcodes 19
6.3 Delete a Single Passcode 20
6.4 Delete All Passcodes 20
6.5 Passcode Disguise 20
Section 7
Using the Mute Function 21
7.1 Activating Mute Mode 21
7.2 Deactivating Mute Mode 21
Section 8
Resetting the Lock 22
Section 9
Specications 23
Section 10
Maintenance 23
Section 11
Troubleshooting 24
Section 12
Warranty 26
12.1 Violation 26
12.2 Information 26
Table of Contents
4 TURBOLOCK TL116
Section 1
Information & Safety Warnings
1.1 Introduction
This user manual will guide you through the functions and usage of your TURBOLOCK TL116. It is important that you follow all
instructions and regard all notes that appear throughout this manual. Consult this manual before you attempt to use your lock. If you
have questions not answered by this manual or are in need of repair or non-routine service, contact customer service at 1-855-850-
8031. Before contacting customer service, please have your purchase information ready as this may be needed during the call.
Please record this information below:
Date of Purchase:
Place of Purchase:
1.2 Safety Warnings
When reading this manual, note these icons:
Notes with this icon MUST be read, understood, and obeyed to prevent injury, damage or loss of functionality.
Notes with this icon include relevant information.
General Precautions
• The lock shall only be used as described in this manual.
• Verify that all parts of the lock are accounted for. If any part is missing, contact customer service.
• If the battery compartment or surrounding parts are damaged, do not use the lock.
• Use only 4 x AA batteries.
• Never insert objects into the lock other than batteries as described in this manual.
• The lock is not a toy. Do not leave children unsupervised around the lock.
TURBOLOCK TL116 5
• Use only the parts included in the original packaging or received from TURBOLOCK.
• Verify all surfaces are at and level before beginning installation. Installation on doors or surfaces with any type of
deformity such as gaps or warping may cause the lock to malfunction or fail to operate entirely.
• Expected use is for standard doors made for buildings within the U.S.
• New batteries on average can deliver up to one full year of use before replacement is needed. Battery life varies by
usage.
• Replace the batteries after receiving the lock’s low battery notication.
• Never apply any cleaner directly to any part of the lock. Only use clean (or puried) water and mild cleaner on a soft,
non-abrasive cloth when cleaning.
• Potential Shock Warning: Do not allow water and/or liquids to get into the lock’s electric parts.
• Never submerge the lock or any of the lock’s components.
• Hanging objects on the lock is not recommended.
1.3 End-of-Life Disposal
This product must not be disposed of by incineration, landlling, or mixing with household trash. Improper disposal of the
battery contained within this product may result in the battery heating up, rupturing, or igniting which may cause serious injury.
The substances contained inside the battery present chemical risks to the environment. The recommended disposal for any
TURBOLOCK TL116 at its end-of-life is to dispose of the entire unit at or through an e-waste recycling center, program, or facility.
Local regulations and laws pertaining to the recycling and disposal of certain types of batteries and/or products containing them
will vary according to country, state, and local governments. Please check laws and regulations corresponding to where you live in
order to properly dispose of the battery and/or unit. It is the user’s responsibility to dispose of their waste equipment properly with
accordance with local regulations and laws.
For additional information about where you should drop o your batteries or electronic waste, please contact your local or regional
waste-management oce, your household waste disposal service, or your point-of-sale.
1: Keypad
2: Key Hole
3: Micro-USB Charging Port
4: Speaker
5: Power Cable
6: Wood Screws
7: Strike
8: Strike Box
9: Inside Screw
10: Inside Knob
11: Reset Button
12: L/R Switch
13: Battery Compartment
14: Inside Assembly
15: Mounting Screws
16: Inside Screws
17: Battery Compartment Cover
18: Plate
19: Latch Assembly
20: Latch Pin
21: Outside Assembly
6 TURBOLOCK TL116
1.Switchmust point towards the closest
dooredge of the lock.
2.Changebatteries immediately after
receivingfirst low-battery warning.
RESET
Leftand right
lockswitch
Section 2
Package Contents & Overview
2.1 Contents
TL116 Smartlock x 1
Inside Knob x 1
Latch Assembly x 1
Wood Screws x 6
Mounting Screws x 2
Plate x 1
Keys x 3
- Mounting screws may already be
inside the lock upon opening.
- Requires 4x AA batteries (not included).
2.2 Overview
2
1
5
346
8
9
7
10
11
12
13
15
14
16
17
18
19
20
21
TURBOLOCK TL116 7
2.3 Battery Information
The lock requires four standard or rechargeable ‘AA’ batteries. New batteries should be installed as soon as possible after receiving
the rst low-battery warning, as indicated by a single red ash on the indicator and a voice conrmation:
“Low battery. Please replace the battery.”
After that rst notication, the lock will only have enough power for approximately 50 uses before the batteries are fully depleted.
Low-battery notication will come from the lock itself.
2.4 Usage Overview
When using the passcodes, the TL116’s backlight will turn on. Press the “ “ button on keypad to lock. You can also use one of the
included physical keys to open the lock directly.
Using the Admin Passcode
Use the keypad to enter the Admin Passcode, and then press ‘ ’ to unlock the door.
For added security, the Admin Passcode must be changed from the manufacturer’s default after installation and initial testing.
See Section 6.
Using the Emergency Power Port
Supply power via the Emergency Power Port on the bottom of the lock. The backlight will ash indicating the lock is receiving power.
Enter a Passcode and then press ‘ ’ to unlock the door as usual.
Using a User Passcode
Use the keypad to enter the passcode, then press ‘ ’ to unlock the door.
• The TL116 features a Mute Function. See Section 7.
• If a Passcode has been entered wrong 5x in a row, the lock will go into a 5-minute period of inactivity where it cannot be
used, except with the included physical key. This is a security feature designed to prevent unwanted parties from using the
lock.
8TURBOLOCK TL116
Section 3
Installation (Retrot)
This section details installation steps needed if you are installing the TL116 on a door with a single cutout already
made. Replacing an older xture with a newer one is known as a retrot. If your door has never had a lock or doorknob
installed or otherwise has no cutout, please skip to Section 4.
• For easier installation, have another person help to hold the lock.
• Remove all parts of any old lock before installing the TL116. In some cases, the old strike plate and/or box may be used.
• For your convenience, installation instructions are broken into segments. Read and follow the instructions for both Pre-
Installation and Main Installation.
• If your door happens to have two cut-outs, check the clearance between the two. Make sure there is enough distance so that
you may seal o any extra openings.
3.1 Pre-Installation
Part 1 - Disassemble the Lock
The TL116 comes already assembled. Before installation, release the wood
screws and mounting screws to disassemble the lock into four main parts:
Outside Assembly x 1, Inside Assembly x 1, Plate x 1, Latch Assembly x 1
(Fig. 1).
(Fig. 1)
Outside Assembly
Inside Assembly
Latch Assembly
Plate
TURBOLOCK TL116 9
Part 2 - Installing the Latch
KEEP DOOR OPEN AT ALL TIMES SHORTLY BEFORE, DURING AND SHORTLY AFTER INSTALLATION. If the lock is
incomplete or improperly installed, the lock and/or door may become stuck.
After nishing installation, be sure to use the door at least once to make sure all parts of the lock function correctly.
Step 1. Check the dimensions of the door before installing the latch (Fig. 2).
Step 2. Check the
UP
icon on the latch and insert the latch into the hole. The latch’s plate should sit ush against the edge of
the door (Fig. 3). If there’s too much space behind the latch or if it’s sticking out from the door, the latch should be adjusted.
If the latch needs adjusting, continue on to Step 3; otherwise, go to Step 4.
Step 3. Turn the latch and extend or retract it as needed. Make sure the metal peg pops into one of the two square holes in the
side and the deadbolt is pushed all the way in while adjusting the latch’s length (Fig. 4). Insert the latch back into the door.
Step 4. Add 2x wood screws and use a screwdriver (not included) to secure them (Fig. 5).
23/4” (70mm)
Or 23/8” (60mm)
21/8” (54mm) Hole
1” (25mm)
Door Edge
2
3/4
”2
3/8
”
(Fig. 2) (Fig. 3) (Fig. 4) (Fig. 5)
2
3/4
”2
3/8
”
2
3/4
”2
3/8
”
Part 3 - Installing the Strike
In most cases, the existing strike plate and setup can be used. If you wish to use the one included with your lock, skip to Section
4.1, Part 3.
10 TURBOLOCK TL116
3.2 Main Installation
Step 1. Start with the outside section. Turn the latch pin vertically and
remove the key from the key hole. Gently feed the power cable
under the latch and thread the latch pin through the square hole
in latch. The latch pin must be vertical while inserting the square
hole in the latch (Fig. 6).
Step 2. If needed, have someone hold the door itself or hold the outside
section at against the front of the door. And align the plate
on the back of the door while making sure to gently thread the
cable under the latch. Gently thread the power cable through the
square hole of the plate. Then use the 2x mounting screws to
fasten the plate to the back of the door. Make sure all screws are
tightened. (Fig. 7)
Step 3. Insert the key into the key hole to turn the latch pin horizontally. The bolt should now be extended (Fig. 8).
Step 4. Remove the battery compartment cover on the inside section and turn the inside knob horizontally before installing.
Fig. 6
1.Switchmustpoint towards the closest
door edge of the lock.
2.Changebatteriesimmediately after
receiving first low-battery warning.
RESET
Leftandright
lockswitch
Vertical Latch Pin
1.Switchmustpoint towards the closest
door edge of the lock.
2.Changebatteriesimmediately after
receiving first low-battery warning.
RESET
Leftandright
lockswitch
Power Cable
Fig. 7
1.Switchmustpoint towards the closest
door edge of the lock.
2.Changebatteriesimmediately after
receiving first low-battery warning.
RESET
Leftandright
lockswitch
Mounting
Screws x 2
Power Cable
Fig. 8
1.Switchmustpoint towards the closest
door edge of the lock.
2.Changebatteriesimmediately after
receiving first low-battery warning.
RESET
Leftandright
lockswitch
Horizontal
Latch Pin
Bolt
Tabla de contenidos
Otros manuales de Cerrar de Turbolock
Turbolock
Turbolock TL117 Manual de usuario
Turbolock
Turbolock TL88 Manual de usuario
Turbolock
Turbolock TL111PRO Manual de usuario
Turbolock
Turbolock TL117 Manual de usuario
Turbolock
Turbolock SmartLOCK TL111WM Manual de usuario
Turbolock
Turbolock TL-400KBL Manual de usuario
Turbolock
Turbolock TurboSafe Manual de usuario
Turbolock
Turbolock TL-400KBL Manual de usuario
Turbolock
Turbolock tl-200 Manual de usuario
Turbolock
Turbolock TL111 PRO Manual de usuario
