TTikorea TX-130U Manual de usuario
www.ttikorea.co.kr
PMR446 TRANCEIVER
Thank you for purchasing this radio.
All our products are built to offer excellent
value by combining advanced features,
great design and manufacturing quality.
To ensure you are familiar with the operation
and features of your radio, and in order to
obtain the best performance, please read
this manual carefully before operation.
Contents
Caution .............................................................................
1.Radio Controls ...............................................................
2. Equipment and Accessories Supplied ..........................
3. Fitting the Battery pack .................................................
4. Battery Charging ...........................................................
5. Radio Controls
1. Power On/Off/Volume Control ................................
2. Push-To-Talk (PTT) Button ...................................
3. Monitor/Lock Button ..............................................
4. Scan Memory/Scan Button ..................................
5. Down Button ..........................................................
6. Menu(Mode) Button ............................................
7. Up Button
6. LCD Display ..................................................................
7. Menu mode ...................................................................
8. Basic Radio Operation ..................................................
9. Radio Features Explained ............................................
10. Radio Cloning
11. Radio ID Editing..........................................................
12. Troubleshooting .........................................................
13. CE Declaration ........................................................
14. Safety Requirements ..............................................
15. Technical Specifications ...........................................
..............................................................
............................................................
16. Declaration of Conformity ...........................................
5
6
7
7
8
9
9
9
9
10
10
10
11
12
13
14
19
20
20
21
21
22
ENGLISH
24
TX-130U
5
Caution
IMPORTANT - READ ALL INSTRUCTIONS carefully and completely
before operating your radio and retain this manual for future reference.
NEVER connect the radio to a power source other than the supplied
battery. This may damage your product.
NEVER operate your radio with the antenna less than 5cm from
exposed parts of the body.
NEVER use the radio in or near a mining facility or other area which
uses remotely triggered explosives or an area labelled "Blasting Area".
NEVER
use or charge your radio in a potentially explosive atmosphere.
DO NOT place your radio in front of a vehicle airbag.
DO NOT operate your radio on board an aircraft.
DO NOT use your radio with a damaged antenna.
DO NOT attempt to modify your radio in any way.
ALWAYS charge your radio at normal room temperature.
ALWAYS switch off your radio where notices restrict the use of
two-way radio or mobile telephones.
ALWAYS replace the accessory jack cover (if applicable) when
the jack is not in use.
ONLY use TTI approved rechargeable batteries with the supplied charger.
AVOID charging your radio or battery pack while it is wet.
AVOID storing or charging your radio in direct sunlight.
AVOID storing or using your radio where temperatures are below
-20or above +60
ENGLISH
1.Radio Controls
6
TX-130U
ENGLISH
ྙAntenna
ྚPower On/Off & Volume
ྛSpeaker
ྜMicrophone
ྜྷLCD
ྞDOWN Button
ྟMenu button
ྠUP Button
ྡPTT Button
ྡྷMonitor/Lock Button
ྣScan Memory/Scan
ྤAccessory Jack
ྥBelt Clip
ྦBattery Pack
TX-130U
ⴗ
ⴡ
ⴢ
ⴣ
ⴘ
ⴙ
ⴠ
ⴤ
ⴚ
ⴛ
ⴜ
ⴝ
ⴞ
ⴟ
1. Ensure that your radio is switched off.
2. Align the bottom of the battery pack with the securing slots
at the back of the radio.
3. Press the top of the battery into the back of the radio until
it “clicks” home.
1. Ensure that your radio is switched off.
2. Press down on the battery release catch and seperate the
battery pack from the radio.
1.
TX-130U Radio with Antenna
2. Li-Ion Battery Pack
3. Charging Cradle
4. Power Adaptor
5. Belt Clip
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
2. Equipment and Accessories Supplied
3. Fitting the Battery pack
TX-130U
7
ENGLISH
Fitting
Removal
FittingRemoval
To charge your radio, carefully follow these instructions:
1.
Connect the power adaptor to the mains power supply and
connect the adaptor charger jack to the charging cradle.
2.
Disconnect any radio accessories and ensure the radio is
switched off.
3. Insert the radio into the charging cradle until it 'Clicks' home.
The charger LED will glow red and charging will start. If the charger
LED blinks red or green or the charger LED does not light, re-insert
the radio into the charging cradle.
4. The battery charging time is about 4~5 hours. When the battery
is fully charged the green LED(Full) will be turned on.
Power Adaptor
-Input : 230VAC
-Output : 12VDC 1Ah
4. Battery Charging
8
TX-130U
LED
ENGLISH
TX-130U
1. Power On/Off/Volume Control
2. Push-To-Talk (PTT) Button
3. Monitor/Lock Button
4. Scan Memory and Scan button
5. Radio Controls
TX-130U
9
Turn the knob clockwise to switch on and increase
the volume and counter-clockwise to decrease the
volume and switch off the radio. The radio will emit a
confirmation tone when it switches on.
Press and hold this button to speak (transmit)
and release the button to hear (receive) messages.
You can only communicate with other radios when
the channel and
privacy code are the same as that
of yours.
The red LED lights during the PTT press.
Monitor Momentarily press this button to activate the
function. To deactivate this function,
press this button again.
Note : The green or orange LED lights during receive. The green lights on the
basic channels and the orange lights on the channel with privacy codes.
ENGLISH
Lock Press and hold this button to activate the
keypad lock.
Scan Memory As factory default your radio has all
channels memorized for channel scanning.
To delete a certain channel stay on the channel
and press the function button momentarily.
monitor
momentarily
The scan icon will disappear on the LCD and the channel is now
deleted from the scanning list.
Scan Press and hold this button to activate the scan.
5. Down Button
7. Up Button
Pressing this button will decrease the channel
number. In some modes this button is used to
adjust the function setting.
Pressing this button will increase the channel
number. In some modes this button is used to
adjust the function setting.
10
TX-130U
ENGLISH
TX-130U
TX-130U
TX-130U
6. Menu(Mode) Button
Press and hold for about 2 seconds to enter
the menu mode. Then briefly press to step
down through the menus.
Tabla de contenidos
Otros manuales de Radio de TTikorea
