TS Geyser Manual de usuario

Geyser User Manual

Remote

Table of Contents

Product Overview ................………………… 3

Startup ...................................................... 4

1.Settings ............................………………… 5-6

2.Boost ......................................................11

3.Timer ......................................................12

4.Meter ......................................................13

1.1.Clock....................................... 7

1.2.Wifi.......................................... 7-8

1.3.Temperaure........................... 9

1.4.Tag........................................... 10

1.5.Vacation.................................. 10

5: Tesla Live APP 15

Product Overview

TS-SEWH is an IOT Wi-Fi Device, Specially designed for Gas, Electric

and Hybrid Water heaters. It is highly efficient and programmable

device, which reduces bills up to 70%. Autonomous learning

function matches water heating with usage patterns and can be

remotely programmed and monitored via remote web dashboard or

mobile app. 24 hrs device scheduling avoids heating during most

expensive tariff hours of the day while assuring hot water availability.

Startup

As you power up the geyser following screen will appear on LCD.

Current Heang Source

Water

Condion

Current

Temperature

Desired Water

Temperature

1. Settings

As you click on “Settings” following screen will appear .

Full Model

Solar Mode

is On

Gas is

Unavailable

Boost Mode

is On

Settings Page With Vacation “ON”

Settings no WIFI

1.1 Clock :

This option is used for setting up time as shown below.

1.2 Wifi:

This option is used for connecting your geyser with Internet

as shown below.

Clicking on the desired network, the following page appears.

Tap to enter password.

Type password and click on “OK”

1.3 Temperature:

This page is used for setting temperature limit (e.g 50°C)

for heating up water and select your mode of heating

i.e Gas / Electric / Hybrid.

Auto Mode:

In hybrid mode, geyser will make 3 attempts to use gas source

with the interval of 30 seconds. If the gas source is not available

it will be automatically shifted to electric source. After 45 minutes,

the same procedure will be repeated.

Slide up to desired

temperature value

HYBRID

SOLAR

GAS

ELECTRIC

1.5 Vacation :

When you click on Vacation button, geyser will turn to idle mode

and it will stop working untill you remove it from Vacation Mode.

1.4 Tag:

This is the device ID for registration on mobile app. Open your

XGen app and scan the QR Code to connect it with your geyser.

Tabla de contenidos

Manuales populares de Calentador de agua de otras marcas

Kenmore

Kenmore 153.582400 Manual de usuario

Applimo

Applimo Edel AIR Manual de usuario

STIEBEL ELTRON

STIEBEL ELTRON Eltronom SHU 5 S Manual de usuario

clage

clage E-Mini Series Manual de usuario

Toyotomi

Toyotomi Oil Miser OM-180 Manual de usuario

Bradford White

Bradford White EF Series Manual de usuario

Eccotemp

Eccotemp 40-H Manual de usuario

Dimplex

Dimplex ECSd125-580 Guía

Dux

Dux 32FCR6N Manual de usuario

Toyotomi

Toyotomi Oil Miser OM-148 (Type D) Guía de solución de problemas

Noritz

Noritz N-132M Manual de instrucciones

TESY

TESY GCV7/4S 10047 Hoja de especificaciones

A.O. Smith

A.O. Smith Gphe 50 Manual de usuario

Koryo

Koryo KWHZF15Y Manual de usuario

Pentair

Pentair PSC-14-4-02 Manual de usuario

GE 40M06AAG Instrucciones de montaje

Thermor

Thermor AEROMAX SPLIT 2 Manual de usuario

American Hometec

American Hometec AHQ-B03X Manual de usuario