TRYSIGHT Magnibot Manual de usuario
1
Magnibot
User Guide / Version 1.2
2
Introduction to Magnibot ---------------------------------------- 3
What’s Included ---------------------------------------------------- 4
Using Magnibot ----------------------------------------------------- 5
Connecting to Magnibot ------------------------------------------ 6-7
Menu Bar ------------------------------------------------------------- 8-9
Settings Menu ------------------------------------------------------- 10-11
Camera Options ----------------------------------------------------- 12
Moving Magnibot---------------------------------------------------- 13
Connect to Internet-------------------------------------------------- 14-15
Near Viewing with Stand--------------------------------------------16-17
Warranty and Conditions------------------------------------------- 18
Technical Specifications--------------------------------------------- 18
Contact Us-------------------------------------------------------------- 19
Table of Contents
3
Congratulations on purchasing your Magnibot! This motorized
wireless robotic camera is designed to assist those with low vision in
capturing and viewing images.
Before using your Magnibot, please make sure that it is fully charged.
To charge the device, connect the included USB cable to the
Magnibot and plug the other end into a power source. Charging time
will vary depending on the amount of power remaining in the device,
but it typically takes about 2 hours for a full charge.
Introduction to Magnibot
4
Camera
Wireless Antenna
Charger with USB C Cable
Magnibot Stand (optional)
User Manual
What’s Included
5
TURNING ON/OFF
To turn on the Magnibot, press the power button for 1 second.
A red light will appear in the front of the device indicating the
unit is turned on.
To turn off the unit, press the power button for 3 seconds.
Power
Button
Green Light Indicator
Charging Port
Red Light Indicator for power button
While charging, the indicator will show a blinking green light.
The number of green bars (Maximum of 4) indicate battery
charge level.
Green Light Indicator
Using Magnibot
6
To connect to the camera, disconnect from your existing WiFi
network, then choose the WiFi network "magnibot" and connect.
Check Connect automatically (On Windows)
Note the external wireless antenna is not required to connect to
the Magnibot
Ensure “Connect automatically” is unchecked from any other
available networks on your machine. Leaving this checked will
cause your machine to disconnect from the magnibot and connect
to another network without your knowledge.
Once, connected, open a web browser and go to URL 192.168.4.1
Connecting to Magnibot
7
Video from the camera will appear in the browser with an arrow
as shown below
Clicking this arrow displays a Menu Bar with various features on the
Magnibot.
8
Tab Up to hide the menu
Battery Level Indicator
Rotate Camera Up
Rotate Camera Down
Rotate Camera to the Left
Rotate Camera to the Right
Zoom In
Zoom Out
Menu Bar
9
Toggle Color
Capture an image
Toggle Near/Far (Only available when placed on stand)
Settings
10
To open the settings menu, click the settings icon
Color Modes
Color Options to cycle through.
Frequency
Camera Refresh Frequency.
Motor Movement
Camera Movement Speed (slow/fast).
Settings Menu
Tabla de contenidos
