Trust Easy Connect 9600 Plus Manual de usuario
Easy Connect 9600 Plus
Easy Connect 9600 Plus
User Manual
Version 1.0
Easy Connect 9600 Plus
Copyright Statement
No part of this manual may be reproduced or transmitted, in any form
or by any means, electronic or mechanical, including photocopying,
recording, or information storage and retrieval systems, for any
purpose other than the purchaser's personal use, without the prior
written permission of the manufacturer.
Disclaimer Statement
The manufacturer specifically disclaims all warranties, either express
or implied, including but not limited to implied warranties of
merchantability and fitness for a particular purpose, with respect to the
software, the product manual(s) and written materials, and any other
accompanying hardware. The manufacturer reserves the right to
revise or make improvements to its product at any time and without
obligation to notify any person of such revisions or improvements.
In no event shall the manufacturer be liable for any consequential or
incidental damages, including any loss of business profits or any other
commercial damages, arising out of the use of its product.
* All company or product names are trademarks or registered
trademarks or service marks of their respective owners.
16 NL 10766 EC96P.DOC
Easy Connect 9600 Plus
1
Contents
1. Introduction....................................................................................2
1.1 Conventions...............................................................................2
1.2 Contents ....................................................................................2
1.3 Minimum system requirements..................................................3
2. Safety .............................................................................................4
3. Connection.....................................................................................5
4. Installation of the TWAIN driver and the software......................6
4.1 TextBridge Classic 1.1...............................................................7
4.2 Ulead iPhoto Plus 4...................................................................8
5. Scanning ......................................................................................10
5.1 Opening the scan dialog box....................................................10
5.2 TWAIN dialog box....................................................................12
5.2.1 Explanation of the TWAIN dialog box................................12
5.2.2 Enhance tab......................................................................13
5.2.3 Filters tab...........................................................................13
5.3 Making a scan..........................................................................14
6. Ulead iPhoto Plus 4.....................................................................15
6.1 Initial set-up..............................................................................15
6.2 Starting the TWAIN program...................................................16
7. Working with TextBridge............................................................18
7.1 Setting up the scanner.............................................................18
7.2 Scanning with TextBridge Classic............................................18
8. Maintenance.................................................................................20
9. Troubleshooting ..........................................................................21
9.1 Testing the scanner..................................................................21
10. Specifications............................................................................25
Easy Connect 9600 Plus
2
1. Introduction
This manual is intended for users of the Easy Connect 9600 Plus
scanner. No specific prior knowledge is needed to install and use this
product.
This scanner will only work with Windows 95 / 98 and Windows NT
4.0.
Note: This scanner will not work with MS-DOS, Windows 3.1x /
NT3.x or an Apple Macintosh.
1.1 Conventions
The following conventions have been used in this manual to indicate
instructions:
<key> You should press a key at this point. An indication of
which key is given between the brackets.
‘System’ This is a specific term from a program. These are the
terms used by, for example, Windows.
[DIR] Text in this font should be typed in.
Extra information will be shown as follows:
Note: Turn off the computer before connecting the scanner.
1.2 Contents
When you have unpacked everything you should have the following:
•Scanner
•Power supply adapter
•Interface cable
•CD-ROM with drivers and applications
•This manual
Please contact your dealer if anything is missing or damaged.
Easy Connect 9600 Plus
3
1.3 Minimum system requirements
•Compatible PC with 80486 CPU and 8 MB RAM
•Microsoft Windows 95 / 98 or Windows NT 4.0
•Printer port (EPP)
•Hard disk with at least 60 MB free space (for installation)
•VGA card, 256 colours
•CD-ROM player
Easy Connect 9600 Plus
4
2. Safety
Read the following instructions carefully before use:
1. Remove the power plugs from the power sockets before cleaning
the equipment.
2. Do not use this equipment in damp environments such as
bathrooms, damp basements, swimming pools, etc.
3. Make sure there is nothing placed on the power cord.
4. Never stick anything into the slots on the outside of the
equipment.
5. Do not try to repair the equipment yourself.
6. You should disconnect the power supply and have the equipment
repaired by qualified personnel if:
a) the cable or the plug is damaged or worn;
b) the equipment has come into contact with fluids;
c) the equipment has fallen and/or the casing has been
damaged.
7. Do not place the product in direct sunlight. Direct exposure to the
sun or to excessive heat can damage the product.
Easy Connect 9600 Plus
5
3. Connection
Note: Turn off the computer before connecting peripheral
devices.
Follow these steps to connect the scanner to your computer:
1. Turn off the computer and all peripheral devices.
2. Remove the printer cable plug, if there is one, from the parallel
port at the back of your computer.
3. Connect the printer cable, if there is one, to the ‘Printer’
connector at the back of the scanner (connector A, Figure 1).
4. Unpack the interface cable and connect it to the parallel port of
your computer.
5. Connect the other end of the interface cable to the ‘Computer’
connector of the scanner (connector B, Figure 1).
6. Connect the power supply adapter cable to the scanner
(connector C, Figure 1).
7. Plug the power supply adapter into the wall socket.
Your scanner (and printer) are now connected. You are ready to install
the driver and the applications. You may have to re-install your printer.
Note: The scanner will be turned on and off automatically and
therefore has no on/off switch.
Figure 1: Back side of the scanner
Easy Connect 9600 Plus
6
4. Installation of the TWAIN driver and
the software
All the files needed for the installation of the drivers and the application
software are on the CD.
Note: The following notation has been used in the examples:
hard disk is drive ’C:’, CD-ROM player is drive ‘D:’. If your
system uses different drive letters you should replace the
drive letters in the examples with your own.
In order to use your scanner in Windows you should first install the
TWAIN driver and the applications.
Close all other programs before you install the software.
1. Start Windows.
2. Insert the CD-ROM with the application in the CD-ROM player.
3. Click with the mouse on the ‘Start’ button and select ‘Run’ (see
Figure 2).
Figure 2: Windows 95, 98 and NT 4.0 installation
4. On the command line type [D:\SETUP.EXE] (see Figure 3). Click
on ‘OK’.
Figure 3: Windows 95, 98 and NT 4.0 installation
5. Use the mouse to select the language you wish to use during
installation (English, French, German, Italian, Spanish or Dutch).
Click on ‘OK’ to continue. The welcome screen will appear.
6. Follow the instructions on the screen.
Easy Connect 9600 Plus
7
7. Select ‘Typical’ to install all the components. Click on ‘Next’.
8. To continue installation follow the instructions on the screen.
4.1 TextBridge Classic 1.1
The installation of the ‘Textbridge Classic’ OCR program is part of the
total installation and will be done automatically.
1. Select ‘Full Installation (software and scanner)’ and click on
‘Continue’. A screen with the license agreement appears.
2. Click on ‘Yes’ to accept the license and to continue installation.
3. Select all the languages for OCR recognition (Figure 4) and click
on ‘Continue’. You can only recognise text in the languages you
have selected here.
Figure 4: Selecting languages
4. Click on ‘Continue’ to accept the installation directory for
TextBridge Classic.
5. After installation you should select the type of scanner. Select
‘TWAIN’ and click on ‘Continue’ (see Figure 5). A window with
the available TWAIN drivers appears.
Easy Connect 9600 Plus
8
Figure 5: Selecting the input device
6. Select the ‘Trust Easy Connect 9600 Plus’ from the list and click
on ‘Select’. A window such as Figure 6 will appear.
Figure 6: Finishing installation
7. Click on ‘End’ to complete the installation.
4.2 Ulead iPhoto Plus 4
The installation procedure will now continue with the installation of
Ulead iPhoto Plus 4.
1. Select the language you want to use for the program and click on
‘OK’.
2. Follow the instructions on the screen to continue installing.
3. Select ‘Typical’ to install all components. Click on ‘Next’ to
continue.
Tabla de contenidos
Otros manuales de Escáner de Trust
Trust
Trust DIRECT WEBSCAN 19200 Manual de usuario
Trust
Trust 7230 Easy Connect Manual de usuario
Trust
Trust FLAT SCAN USB19200 Instrucciones de funcionamiento y mantenimiento
Trust
Trust Handy Scan Colour Manual de usuario
Trust
Trust Easy Scan 19200 Plus Manual de usuario
Trust
Trust FLAT SCAN USB19200 Manual de usuario
Trust
Trust 240H EASY WEBSCAN GOLD Manual de usuario
Trust
Trust Easy Scan 19200 Manual de usuario
Trust
Trust Easy Scan 19200 Plus Manual de usuario
Trust
Trust Easy Scan 9600 Plus Manual de usuario
