TruGolf APOGEE Manual de usuario
GETTING STARTED
Welcome to APOGEE 1
Packaged Items 2
HARDWARE
Overview 3-4
Installation 5-8
Wiring 8-9
GET ACQUAINTED
System info 10-12
“Hey APOGEE”
Voice Commands 13-14
APOGEE CONTROL CENTER (ACC)
Status 16
Tools 17
Support 18
CONTACT CUSTOMER SUPPORT
Monday–Friday
9:00 am–5:00pm MST
Toll Free: 877-711-6691
Direct Line: 801-677-1123
https://trugolf.com/support
Designed and Assembled in the USA
CONTENTS
Before installation, please review the included
components and familiarize yourself with the
Launch Monitor.
To complete installation, you will need:
• Ladder
• Plumb bob
• Measuring Tape
• Pencil
• Laser Level
• Drill
• Stud Finder
For users mounting APOGEE in custom, or non-
simulator bay environments, additional hardware
may be required to achieve functional launch monitor
placement.
APOGEE must be securely installed between 9’ to 10’
feet above the hitting surface.
GETTING STARTED
WELCOME TO APOGEE
1
HARDWARE
1. APOGEE Launch Monitor
2. APOGEE Ceiling Mount
PAPER
3. APOGEE Calibration Template
• Use this to complete calibration inside the
APOGEE Control Center Software
4. “Hey APOGEE,” Voice Command Instruction
• User Guide to the Voice Command feature
5. APOGEE User Guide
6.E6 CONNECT Product Key
• Download E6 CONNECT, create your
account, and redeem this product key
• This can be done at: portal.e6golf.com
CABLES
7. CAT6 Cable (50’)
8.USB to CAT6 Network Adapter
9. Power Cable
TOOLS AND EQUIPMENT
10. Laser Level
11. Mounting Hardware
• Wood Screws
• Drywall Anchors
• Fender Washer
MISCELLANEOUS
12. Reflective Dots
GETTING STARTED
PACKAGED ITEMS
2
HARDWARE
A. Ceiling Bracket
B. Mounting Slot
C. Mounting Screws
D. Cable Inputs
E. System Status Indicator (SSI)
The APOGEE logo color will change according to
status
F. System Connection Indicator (SCI)
The SCI lightbar will change color upon error
G. Center Camera
H. Offset Camera
I. APOGEE Laser Indicator
Projects ball placement pattern on ground
J. Microphone
K. Infrared Lighting System
These are internal, with the light passing
through the acrylic faceplate.
OVERVIEW
3
HARDWARE
FRONT VIEW
BACK VIEW
4
HARDWARE
INSTALLATION
5
To identify the centerline of your simulator, place reflective dots
at the center of your Tee Box (desired hitting area) and the
center point of your screen. Align the included laser level with
the two dots to determine the centerline of your simulator.In the
majority of simulators, this will be in the center of your space.
APOGEE should be installed on a flat, level surface and has to be installed
between 9’-10’. The APOGEE mount is threaded and can be attached
to a universal projector mount for ceiling heights over 10’ in height. For
secure installation, wooden backing is recommended. APOGEE has a
fixed position Tee Box. Installation starts with YOU knowing where you
want your Tee Box to be, and installing APOGEE in the correct position
to accommodate it. Accuracy of APOGEE depends on an accurate
installation.
NOTE: If your mat is not centered in your simulator
space, the centerline at the screen should
match the offset of the mat.
1
HARDWARE
6
2 Measure the distance from the turf to ceiling and use the
table below to find your “Tee to APOGEE” distance. Using
your “Tee to APOGEE” distance, measure forward from the
center of your desired tee location and place a mark on the
floor with one of the included Reflective Dots. Using a plumb
bob, place a corresponding mark with a pencil on the ceiling.
Ceiling Height
in Centimeters Tee to APOGEE
274-278 53
279-285 56
286-293 58
294-300 61
301-305 64
Ceiling Height
in Inches Tee to APOGEE
108”-109” 21”
110”-112” 22”
113”-115” 23”
116”-118” 24”
119”-120” 25”
HARDWARE
INSTALLATION CONT’D
7
The APOGEE Mount ships attached to APOGEE. Detach it from
APOGEE by loosening the 4 screws, front and back.
To ensure the mount is parallel to the
screen, rotate and adjust the mount
until the laser bisects all center holes
and tighten down center screw.
Attach the APOGEE Mount using one of the included screws and
fender washer through the center hole on the mount to the mark
on the ceiling.
3
4
5
DO NOT TIGHTEN FULLY AT THIS POINT
Note: Screws included for mounting to Drywall or wooden surface.
DO NOT REMOVE SCREWS
Tabla de contenidos
Otros manuales de Accesorios para videojuegos de TruGolf
TruGolf
TruGolf E6 Interactive Sports Camera Manual de usuario
TruGolf
TruGolf TruFlight 2 Manual de usuario
TruGolf
TruGolf WILD WEST Manual de usuario
TruGolf
TruGolf TGM-100 Manual de usuario
TruGolf
TruGolf TruFlight 2 Manual de usuario
TruGolf
TruGolf VISTA Series Manual de usuario
TruGolf
TruGolf VISTA Series Manual de usuario
Manuales populares de Accesorios para videojuegos de otras marcas
Sega
Sega Visual Memory Unit Manual de usuario
Datel
Datel Go-tcha Expedition Manual de usuario
CH Products
CH Products CH PRO THROTTLE Manual de usuario
Thrustmaster
Thrustmaster T2PA Manual de usuario
Cube Controls
Cube Controls Mercedes-AMG - GT Edition SIM Wheel Manual de usuario
Hoffmann
Hoffmann Club Pro Manual de usuario
