TRUE RESIDENTIAL®TEC_TM_155 | REV. F | EN11/27/2023Page 6 of 68 P#829867
INSTALLATION CHECKLIST
To ensure no part of the installation process has been overlooked, complete the checklist below.
☐Has an authorized True dealer or licensed installer inspected stainless steel surfaces
for imperfection?
(Cosmetic defects are covered by a limited 30-day warranty)
☐Have all packaging materials been removed?
☐Is the unit properly leveled with all leveling legs contacting the floor?
☐Has the water filter been installed? Has the water supply been turned on?
☐Have the water supply and drain connections been made?
☐Is the water supply temperature always between 40-100˚F (4.4-7.8˚C)?
☐Has the ice machine drain line been routed into an open drain with no more than 84"
(2,133.6 mm) vertical rise for 3/8" O.D. tubing and no more than 100’ (30.48 m) run?
☐Has the water supply been turned on?
☐Is the power cord plugged into a properly grounded three-prong outlet in accordance with all
applicable electrical codes?
☐Have all connections been checked for water leaks? If not, pour water directly into the ice
storage bin to ensure drain pump operation and inspect for leaks.
☐Were the ice machine and storage bin disinfected prior to use? If not, see “Sanitize" (pg. 54).
☐Has the ice machine been turned on? During the initial fill, can you hear the water valve turn on
and see water filling the reservoir tank?
☐After the first ice cycle, did all 24 ice cubes fall into the bin during harvest?
☐Has the ice produced in the first hour of operation been discarded?
☐Has the customer reviewed the unit’s operation in this manual?
☐Has the customer reviewed the schedule of maintenance of the machine?
