Tru-Test JR 3000 Manual de usuario
Installing the
Indicator
The ultimate in weight management
1. Mount the indicator bracket on a flat surface, such as a timber rail or concrete structure, using
screws or nails. Alternatively, mount the bracket onto horizontal pipework with the U-bolts
supplied.
2 Connect the load sensor cables to the indicator. Connect the dust caps together to keep out
dirt and moisture.
3. Connect the power cable (if using an external 12 V supply).
®
World leaders in weighing
QUICK START GUIDE
JR3000 Features !
!
!
!
!
!
!
!
!
Messages prompt you through the weighing sequence for each animal.
The indicator learns the data entry sequence for fast data entry.
The indicator automatically maximises the viewable size of the weight display.
The back-lit display with light sensor allows the indicator to be used in low light conditions.
An on-screen help system provides on-the-spot assistance when you need it.
Printed reports can be created for files, statistics and weighing session data.
Up to 10,000 individual animal records can be stored.
The indicator stores four digits of data with each weight, together with two IDs.
Animals can be drafted/sorted into two ranges.
Communications connectors
for connecting to computer,
printer, EID reader etc.
Dust caps screw together to keep
out dirt and moisture when cables
are connected to the indicator.
Screw back on indicator/cables
when cables removed.
Loadcell connectors
Power connector for connecting 12 V vehicle battery
(red clip to positive terminal) or Tru-Test power adaptor.
To connect power adaptor, pull battery clips off indicator
lead and plug lead into power adaptor lead (red to red).
Parts of the
Indicator
Weighing Screen
Soft Keys
Weighing screen
Cursor shows part of screen
that is active and can be
changed or actioned.
Stable light is illuminated
when weight is stable and
can be recorded.
Press to record a weight
Press to enter IDs
and other data
Press to go back one key press.
It allows you to remove the last digit typed,
or get to a previous scrceen.
Press to access the
on-screen help
Press arrow keys to
move the cursor
around the screen.
Live weight
Press soft key to
perform operation
shown on soft key
label above
Press several times to return
to Weighing screen from
any other screen
Press to access setup screens, e.g.
• Lifetime Animal Database
Drafting/Sorting
Printer, computer and EID interfaces
ime and date
• File Data
•
•
• System t
Soft key label
Press to turn indicator
on and off
!
!
!
!
Mount the indicator in a convenient place where animals cannot knock the indicator or chew
the cables.
Mount the bracket firmly to prevent possible operator errors or fatigue.
Position the indicator so that the screen is out of the sun if possible.
When installing load sensors, refer to the documentation supplied with the load sensors.
Installation Tips
To turn on the indicator:
1. Press to turn on the indicator.
The Startup screen may appear, depending on the setup of the indicator.
2. From the Startup screen, press to start weighing
-or-
Press to access the on-screen tutorial.
ESC
?
Getting Started
and access information about the indicator, e.g.
• Battery
• Indicator memory
• Loadcell
Displays a list of files. Each file typically represents one weighing session.
Zeroes the scale manually. Used if dirt builds up on the platform.
Zeroing is usually automatic.
Displays calculations for animals in the file e.g. average, total, minimum
and maximum weights.
Displays information recorded in the weighing session e.g. weights,
measured data, drafting ranges, together with the ID. File data is linked
to life data via the ID. File data can be viewed and edited.
Displays a list of all the IDs. More than one ID can be entered for an
animal. IDs are cross-referenced, so that any ID can be entered in order
to display animal information. Life data can be viewed and edited
Getting Started
Cont...
Parts of a
Help Screen
To start a file for a new weighing session:
To record an animal ID and weight:
To view all recorded data from the weighing session:
To view statistics:
To enable an option in a setup screen:
To view on-screen help:
1. Press to go to the List of Files screen.
2. Select an empty file.
3. Press .
The file Start Date is entered automatically when the first weight is recorded.
1. Press to zero the scales, if required.
2. Move the animal onto the platform.
3. Enter an ID using the keypad. Press .
If the animal has not been weighed before, a dialogue box appears.
4. Select ‘Create a new life data record’. Press .
5. Enter other data, if required.
6. Press when ready to record the displayed weight.
7. Repeat for each new animal.
Press to view weights and other data recorded in the weighing session.
Press to view a summary of numerical data, for example, average weight, maximum
weight and the number of file data fields recorded in the file.
1. Place the cursor on the option you want
to enable or disable.
2. Press .
3. Select an option using the arrow keys.
4. Press .
Find out about any field, screen or feature, using the on-screen help.
1. Place the cursor on the field you want to find information about.
2. Press .
A help screen is displayed about the field you are on.
3. If required, move the cursor to a link and press .
ESC
?
?
Select link, then
press to see a
step-by-step guide
?
Select link, then press to see a
list of help topics.
Use arrow keys to scroll up and
down the list.
Select a word and press .
?
Select link, then press to see
more information about the
screen you are in
?
Select link, then
press to see a
handy tip about
this feature
?
TIP
To change to quickly, select and press
To change to quickly, select and press
1
0
The Tru-Test model JR3000 has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment is used in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference, in which case users will be required to correct the interference at their own expense.
!
!
!
!
!
!
The internal battery charger operates from the recommended Tru-Test power adaptor or a 12
volt vehicle battery.
The indicator switches off automatically after 15 minutes of inactivity. Auto Power Off feature
can be disabled by pressing then . Press to change to .
The indicator should be charged for 12 hours before it is used for the first time.
To view Battery Information including Charge (%) and Time to Run (hours and minutes), press
, then .
A flat battery takes 8 hours to charge at temperatures of 10 °C to 35 C. For temperatures
outside this range, charging time may be increased to 12 hours. In very extreme temperatures,
the indicator may not charge.
The indicator may be left on charge at all times and the scale can be used while charging.
0
°
SETUP
SETUP
Weighing Tips
Battery Information
Maintenance and
Storage Tips
Latest Information
and Software
Downloads
Service Information
Feedback
WID82001 Issue 3 4/03
During weighing, make sure:
!
!
!
!
The animal has four hooves on the platform.
Hands do not come into contact with the animal, or with part of the enclosure.
Another animal is not touching part of the enclosure.
The animal is not touching an unweighed part of the enclosure.
!
!
!
Make sure the underside of the crate or platform is free from dung, dirt and stones.
Store the loadbars and the indicator in a clean, dry place, out of direct sunlight when not in
use.
Charge the indicator overnight before and after long-term storage, and every three months
during storage.
For up-to-date information about Tru-Test products and downloads of latest software versions for
your indicator, visit our web site at: www.tru-test.com.
You can download Link3000 to transfer data from your indicator to your computer.
For repair or service information, contact the supplier of your JR3000.
Tru-Test welcome feedback from customers. You can send any feedback about this product via
the Feedback link from the Scales page at www.tru-test.com.
Specifications
NOTE: Specifications may change without prior notice.
Size 270 x 190 x 71 mm.
Weight Battery option = 1.6 kg (3½ lb), non battery = 1.4 kg (3 lb).
Accuracy ± 1% or 2 resolutions (whichever is greater) when used with Tru-Test
load sensors, minimum base resolution 0.5 kg (1 lb) normal, 0.1 kg (0.2 lb) fine.
Battery Charging time = 8 hours in normal conditions; Run time = 15 hours continuous use
minimum with two loadcells (8 hours with back light on). Auto turn off = 15 minutes.
Power requirements
Display High contrast, wide temperature LCD module, 240 x 128 dots.
IP67 waterproof rating The indicator is 100% water and dust proof. It can be submerged in water to a depth
of 1 m for 30 minutes.
Environmental Operating temperature: -10 to +40 °C (+15 to +105 °F).
Storage temperature: -20 to +35 °C (-5 to +95 °F).
Loadbar capacity Power for up to 8 (350 load bars or load cells. Enables weighing of large loads.W)
Communication 2 x D9, one interface RS485 or RS232, the other RS232 only. Allows for connection to a
printer and/or computer.
AC adaptor (regulated) or battery, using crocodile clip 11 to 16 V d.c., 400 mA.
Otros manuales de Panel táctil de Tru-Test
Manuales populares de Panel táctil de otras marcas
IBASE Technology
IBASE Technology ASTUT-152-RE1S Manual de usuario
YASKAWA
YASKAWA TP 610C Manual de usuario
B&R
B&R Power Panel C Series Manual de usuario
Beijer Electronics
Beijer Electronics X2 control Manual de usuario
AXIOMTEK
AXIOMTEK GOT321W-521 Manual de usuario
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Manual de usuario
