Tru-Test XRS2 Stick Reader Manual de usuario

Offspring pairing using the XRS2 Stick Reader

Offspring pairing with the XRS2 Stick Reader enables you to link a dam with her offspring so that you can look up

breeding histories.

At the time of recording offspring, you can also record other information such as an animal’s date of birth or breed.

Offspring pairing information can only be recorded for animals with EID tags.

1 Setting up the stick reader for offspring pairing

1. Press to switch on the stick reader.

2. Press and select Settings.

3. Select Tag Reading.

4. Enable Offspring Mode.

Before you begin scanning offspring pairs, you may like to pre-load animal lifetime information such as a file

containing EID/VID pairs. This will mean that when you scan an EID tag, the animal’s VID number will

automatically be displayed. For more information on how to do this, see the

XRS2 Stick Reader Quickstart

Guide

XRS2 STICK READER SETUP GUIDE

Offspring pairing using the XRS2 Stick Reader

2 Recording offspring pairs

When recording dams and their offspring, you must scan animals in a particular order. The Dam must always be scanned

first, followed immediately by her offspring. Here is an example scanning sequence:

1. Scan the first Dam (Dam 1).

2. Scan both of her offspring (Offspring 1 and Offspring 2 of Dam 1)

3. Scan the next Dam (Dam 2).

4. Scan her offspring (Offspring 1 of Dam 2) etc.

To start a new session file and record offspring pairs:

1. On the Home screen, press and select New Session.

2. If desired, change the session name using the keypad and press .

3. Press to confirm that you want to scan in Offspring mode.

The Scanning screen contains extra fields especially for offspring pairing.

4. Scan the EID of the first Dam by pressing the Read button while holding the stick reader near its EID.

The EID is recorded and the screen displays ‘Dam’.

5. Scan the EID of the Dam’s offspring.

6. Press to confirm that the animal is the offspring of the Dam you recorded previously.

The EID is recorded and the screen displays ‘Off’ (Offspring) and the EID of the Dam.

7. Scan the next animal’s EID. If the animal is another offspring of the same Dam, confirm this by pressing . If it is

not offspring but a new Dam, press .

Offspring pairing using the XRS2 Stick Reader

3 Recording other information

You can record additional information during scanning by adding animal data fields to the Scanning screen.

For example, you might want to record information such as the DOB (date of birth) or the breed of the offspring.

To add animal data fields to the Scanning screen:

1. On the Home screen, press and select Settings.

2. Select Animal Data.

3. Select a field you want to display on the Scanning screen (e.g. DOB).

4. Select a number for the Screen Order. This sets the order in which fields will be displayed on the Scanning screen.

5. Repeat steps 3 and 4 for any additional animal data fields you want displayed on the Scanning screen.

When Offspring Mode is enabled, any extra animal data fields will appear

after

the three default fields

displayed (D/O, Dam EID and Dam VID). This means that the first available position for an animal data field

is 4.

If you previously set up an extra ID field before enabling Offspring Pairing mode, this ID field will appear

with the Dam details on the Scanning screen. In this case, the first available position for an animal data

field is 5.

To record offspring pairs when you also have animal data fields on the Scanning screen:

1. Follow the instructions for recording offspring pairs (see page 2), but as soon as you have scanned an EID tag, press

to scroll to the animal data field. Enter data using the keypad.

2. Scroll to the next animal data field (if you have added more than one animal data field to the Scanning screen) and

enter data in it.

3. Scan the EID tag of the next animal and proceed as usual.

Offspring pairing using the XRS2 Stick Reader

4 Reviewing offspring pairing information

You can view the offspring pairing information you have recorded by opening up the session on the stick reader.

To view a recorded session:

1. On the Home screen, select Sessions.

2. Scroll to the session containing offspring pairing information you have recorded and select it.

The EID tags of all animals recorded in the session are displayed.

3. Select an EID to view details of the individual animal.

The following fields are displayed:

The date and time the animal was scanned.

The animal’s EID (and VID if you included this as an animal data field when setting up the Scanning screen)

D/O = Dam or Off (Offspring)

Dam EID (and Dam VID if applicable)

Any other animal data fields you included when you set up the scanning screen.

5 Getting information off the device

You can transfer the data you have recorded to your PC using Data Link for PC or to the Data Link app for mobile

devices. For more information, see the

XRS2 Stick Reader Quickstart Guide

Offspring pairing using the XRS2 Stick Reader

6 Fixing errors

If you make a mistake during scanning, you can easily fix the error on the stick reader before transferring the data.

Examples of mistakes which can occur:

•As you are scanning animals, you realise that your animals have got out of sequence.

•You realise that you have have recorded offspring against the wrong dam.

•You realise that you have recorded a dam as offspring.

Fixing an error

during

scanning

1. In the Scanning screen, as soon as you have scanned the EID tag, you can delete

that record by pressing .

2. Press to confirm.

Fixing an error in the session file

after

scanning

You need to find the record containing the error, delete that record and scan the animal again. If you have assigned

dam and offspring incorrectly, we recommend that you delete the records of both the dam

and

its offspring and re-scan

them again.

1. On the Home screen, select Sessions.

2. Scroll to the session containing the error and select it.

The EID tags of all animals recorded in the session are displayed.

3. Select the EID with the mistake in it.

4. Press .

5. Press to confirm that you want to delete the record.

6. Re-scan the EID tags in the correct order (dam, followed by offspring) as required.

For further information regarding your stock management system, contact Tru-Test Ltd on 1800 621 324 (AU) or 0800 878 837 (NZ)

For technical support in New Zealand, contact 0800 AGDATA (0800 243 282)

Issue 104/2018

Otros manuales para XRS2 Stick Reader

Tabla de contenidos

Otros manuales de Almacenamiento de Tru-Test

Tru-Test

Tru-Test XRS2 Stick Reader Manual de usuario

Tru-Test

Tru-Test XRS2 Stick Reader Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario