Installation manual
Displacement flow diffuser QL-WF-E
4
Standards and guidelines
For all work on the displacement flow diffuser, the following provi-
sions and guidelines among others must be observed
- Product Safety Laws (PrSG)
- EKAS provisions
The local regulations for health and safety at work and general
safety regulations also apply.
Repair and replacement parts
To maintain the function, use only original TROX HESCO
Schweiz AG replacement parts.
Environmental protection / disposal
To protect the environment keep the following in mind:
- The packaging of the displacement flow diffuser is to be dis-
posed of environmentally
compatible.
- After being decommissioned the displacement flow diffuser
is to be properly disposed of at an authorized
disposal facility.
Qualified staff
Specialist personnel
Specialist personnel are individuals who have sufficient profes-
sional or technical training, knowledge and actual experience to
enable them to carry out their assigned duties, understand any
potential hazards related to the work under consideration, and
recognise and avoid any risks involved.
Limitation of liability
The information in this manual has been compiled with reference
to the applicable standards and guidelines, the state of the art,
and our expertise and experience of many years.
The manufacturer does not accept any liability for damages
resulting from:
- Non-compliance of these instructions
- Improper use
- Operation or handling by untrained individuals
- Unauthorised modifications
The actual supply package may differ from the information in
this manual for special versions, additional order options or as a
result of recent technical changes.
Personal protective equipment
Personal protective equipment must be worn for any work in
order to reduce health or safety hazards to the minimum.
The appropriate protective equipment for a job must be worn for
as long as the job takes.
Industrial safety helmet
Industrial protective helmets protect the head from falling objects,
suspended loads and knocks against
stationary objects.
Protective gloves
Protective gloves protect hands from friction, abrasions, punc-
tures, deep cuts, and direct contact with hot surfaces.
Safety shoes
Safety shoes protect the feet against crushing, falling parts, and
from slipping on slippery ground.
Correct use
TROX HESCO displacement flow diffusers are used for applica-
tions where ventilation efficiency is critical, i.e. as few contami-
nants as possible yet at the same time maximum thermal comfort
in the occupied zone.
