USER MANUAL TXB30LS, V19.01 page | 5
Technical changes, misprints and errors are reserved
Safety Instructions for commissioning
•The lift may be installed and commissioned by authorized service personnel only.
•The standard lift version may not be installed and commissioned in the vicinity of
explosives or flammable liquids.
•The standard lift version may not be installed and commissioned outdoors or in
moist rooms (e.g. car wash).
Safety Instructions for Operation
•Carefully read the User Manual.
•Lift operation by authorized personnel over 18 years only.
•Always keep the lift and lift area clean and free of tools, parts, debris etc.
•Once the pads contact the lifting points of the vehicle, check if the pads are in the
correct position.
•After raising the vehicle briefly, stop and check the pads for secure contact.
•Always lift the vehicle using all four pads!
•Make sure the vehicle doors are closed during raising and lowering cycles.
•Closely watch the vehicle and the lift during raising and lowering cycles.
•Do not allow anyone to stay in the lift area during raising and lowering cycles.
•Climbing up the raised lift or vehicle is prohibited.
•Only use the lift for its intended purpose.
•Comply with the applicable accident prevention regulations.
•Do not overload the lift. The rated load capacity is indicated on the lift nameplate.
•Only use the vehicle manufacturer´s recommended lifting points!
•After positioning the vehicle, apply the parking brake.
•Use caution when removing or installing heavy components (center-of-gravity
displacement)!
•The main switch also serves as EMERGENCY SWITCH. In case of emergency
turn it to the position “0”.
•Protect all parts of the electrical equipment from humidity and moisture.
•Protect the lift against unauthorized usage by padlocking the main switch.
