CONTENTS
PAGE NO.
SECTION 1 INTENDED USE 1
SECTION 2 COMPONENTRY 3 - 7
SECTION 3 GETTING STARTED 9
SECTION 4 HOW TO USE 11- 17
Stella System A 11-12
Stella System B 13-14
Stella System C
15-17
SECTION 5 MAINTENANCE 19-24
Battery Management 19
Lubing IQ Process 19
Bluetooth Pairing Process 20
Barcode Validation 20-21
Downloading 21-22
Replacing the Pump Hose and Tube Set 23
Cleaning and Disinfecting Stella 24
SECTION 6 TROUBLESHOOTING AND FREQUENTLY ASKED QUESTIONS 26-29
SECTION 7 WARRANTY 31
SECTION 8 COMPLIANCE 33-41
SECTION 9 STELLA AGENTS 43-44
The Operating Instructions in this manual outline general safety guidelines for the correct operation
of the Stella System, applicable to all variants.
Ensure the instrument for disinfection is compatible with the Stella System and process chemicals prior to use.
Carefully read and understand the user instructions before attempting to operate Stella, IQ or Pulse.
Never use Stella, IQ, Pulse or Cradle for any purpose other than the Intended Purpose.
Do not use Stella, IQ, Pulse or Cradle, including the IQ or Pulse power adaptors, if they have been
damaged or have changed in performance.
Should the unit(s) appear to malfunction, download the data and observe the LCD graphic messages.
This will allow you to take appropriate corrective action or to arrange for repair.
All repairs must be carried out by an approved and qualied service technician.
The Stella System can only be used in combination with Tristel Fuse for Stella for automated disinfection.
The Stella System can only be used in combination with Tristel Clean for Stella for automated cleaning.
Refer to the Safety Data Sheet of the approved disinfectant product to be used prior to use.
For professional use only.
Do not use Stella for the disinfection of surgical equipment or medical instruments intended for autoclaving.
