Tripp Lite SRCOOLNET2 Manual de usuario

Installation and

Quick Start Guide

SNMP/Web Management Accessory

Model: SRCOOLNET2

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Read this manual carefully before installation. A separate User's Guide (PDF

format) is available for download at www.tripplite.com. Refer to the User's

Guide for additional information about configuration and operation.

Installation 2

Features 13

Tech Support 14

Warranty 14

Product Registration and 15

Regulatory Compliance

Español 16

Français 31

Русский 46

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $50 value!

www.tripplite.com/warranty

15-02-247-93342E.indb 1 4/9/2015 9:52:07 AM

The SRCOOLNET2 allows the user to communicate with and control Tripp Lite’s

SRCOOL7KRM and SRCOOL18K spot coolers as manageable devices on a network

accessible via Web Browser, Network Management Station or Telnet.

1 - Preparation

1-1 Confirm Package Contents: In addition to this manual, your package should

include the following:

• Configuration cable (73-1025)

• ENVIROSENSE Module

• ENVIROSENSE User Manual

1-2 Locate MAC Address: The 12-digit MAC address (000667xxxxxx) is located on

the SRCOOLNET2.

Installation

2 – Installation

2-1 Insert the SRCOOLNET2 into the front SNMP accessory slot on the

SRCOOL7KRM or SRCOOL18K (Figure 1 in section 4-2).

2-2 Connect SRCOOLNET2 to Network: Connect a standard Ethernet patch cable

to the RJ45 Ethernet port on the SRCOOLNET2. Note: This port does not

support PoE (Power over Ethernet) applications.

2-3 Determine Network Installation Method: If your network's DHCP server will

assign a dynamic IP address to the SRCOOLNET2 automatically, proceed to

3 - Dynamic IP Address Assignment. If you will assign a static IP address to

the SRCOOLNET2 manually, proceed to 4 - Static IP Address Assignment. If

you are uncertain which method to use, contact your network administrator for

assistance before continuing the installation process.

15-02-247-93342E.indb 2 4/9/2015 9:52:07 AM

Installation

3 - Dynamic IP Address Assignment

3-1 Connect SRCOOLNET2 to Network: By default, the SRCOOLNET2 will attempt

to obtain an IP address via DHCP. This may take as long as several minutes,

depending on your network environment.

3-2 Discover IP Address: Contact your network administrator to determine which IP

address has been assigned to the SRCOOLNET2 by the DHCP server. The card

can be identified on the DHCP server by referring to its MAC address (see Step

1-2). You may wish to request a long-term lease period for the IP address,

depending on your application. After you have discovered the IP address,

proceed to 5 - Test and Configure.

Note: If you prefer, you can determine the DHCP address during boot-up.

Connect a computer running a terminal emulation program to the SRCOOLNET2

using the configuration cable and reset the SRCOOLNET2.

15-02-247-93342E.indb 3 4/9/2015 9:52:07 AM

Installation

4 - Static IP Address Assignment/Terminal Menu

Configuration Settings

4-1 Determine IP Information: Before assigning a static IP address, you'll need to

know the IP address, gateway address and subnet mask. If you do not have this

information, contact your network administrator for assistance.

4-2 Connect SRCOOLNET2 to Computer: Use the included mini-DIN to DB9

configuration cable (part number 73-1025) to connect the SRCOOLNET2 to the

computer. The circular connector Aat one end of the cable attaches to the

8-pin mini-DIN serial port (labeled CONFIG) Bon the SRCOOLNET2 (align the

connector carefully to avoid damaging the pins). The DB9 connector Cat the

other end of the cable connects to the computer’s serial port D.

SRCOOL7KRM SRCOOL18K

Figure 1

15-02-247-93342E.indb 4 4/9/2015 9:52:08 AM

Installation

4-3 Configure Terminal Emulation Program: Open a VT100-compatible terminal

emulation program (such as Tera Term) on a computer with an available DB9

serial port. The example below illustrates the use of a Tripp Lite USB-to-Serial

converter.

4-3.1

Set the terminal emulation program to use the COM port that corresponds to the

DB9 serial port.

15-02-247-93342E.indb 5 4/9/2015 9:52:08 AM

Installation

4-3.2

Specify the parameters required to communicate with the SRCOOLNET2 terminal

interface. Click Setup, then select Serial Port.

15-02-247-93342E.indb 6 4/9/2015 9:52:08 AM

Installation

Press A to Accept the settings,

or M to Modify? m

Enter the root password: *********

Reset configuration and root password to default values? n

For each of the following questions, you can press <Return> to select the value

shown in braces, or you can enter a new value.

ETHERNET INTERFACE SETTINGS:

Obtain IPv4 settings automatically using DHCP for Ethernet interface [Y]? n

IP address [10.1.0.165]? 192.168.1.2

IP address IP address is 192.168.1.2

Subnet mask [255.255.255.0]?

Gateway address [10.0.0.1]? 192.168.1.1

Gateway address IP address is 192.168.1.1

Enable DHCPv6 for the Ethernet interface [N]?

Enable static IPv6 for the Ethernet interface [N]? y

4-4 Configure SRCOOLNET2 in Terminal Mode: Note: The SRCOOLNET2 must be

reinitialized by pressing the reset button (located between the "Link" and "Status"

descriptions under the RJ45 port on the SRCOOLNET2), for 3 seconds. After the

reset, an initialization page should appear in the terminal emulation program.

When the message below appears, press any key on the keyboard within 5

seconds. If the 5-second period has elapsed, you can reinitialize the

SRCOOLNET2.

Press any key in 5 seconds to change these settings.

Follow the sequence of responses below in order to assign a static IP address to

the SRCOOLNET2.

The default root password is TrippLite. Sample IP settings are shown – supply

your own IPv4 or IPv6 information when you configure your SRCOOLNET2.

When the message below appears, enter ‘m’ to modify the SRCOOLNET2's

settings.

15-02-247-93342E.indb 7 4/9/2015 9:52:08 AM

IPv6 address [2001:DB8::1:58:4F43:4849:544C]? fd36:a66d:8c61:8e65:19af:94e9:d8

8c:1

Network prefix length [64]?

IPv6 gateway [::]? fd36:a66d:8c61:8e65::1

DNS server [8.8.8.8]?

This card's host name [poweralert-0641576753151]?

This card's domain []?

For each of the remaining questions, you can press <Return> to select the

value shown in braces, or you can enter a new value. Tripp Lite recommends

against changing the default settings unless you are an advanced user with a

specific purpose.

After you have finished entering settings, the SRCOOLNET2 will save changes to

NV memory and reboot (this may take several minutes).

Saving the changes in NV memory...Done.

After the SRCOOLNET2 reboots, the initialization page should display the new

static IP settings.

PLATFORM: trippliteSnmpCard9210_H_16_32 16M/32M

------------------------------------------------------------------------------

NETWORK INTERFACE PARAMETERS:

FQDN poweralert-0641576753151

IP address on LAN is 192.168.1.2

LAN interface's subnet mask is 255.255.255.0

IP address of default gateway to other networks is 192.168.1.1

IPv6 static address on LAN is FD36:A66D:8C61:8E65:19AF:94E9:D88C:1 prefixlen 64

IPv6 gateway on LAN is FD36:A66D:8C61:8E65::1

DNS server is 8.8.8.8

Time is supplied by SNTP at an interval of 360 minutes

Primary SNTP Server host is 0.pool.ntp.org

Secondary SNTP Server host is 1.pool.ntp.org

Time zone is set to -6:00 from GMT, DST Enabled

Installation

15-02-247-93342E.indb 8 4/9/2015 9:52:08 AM

Installation

5 - Test and Configure

5-1 Test Network Connection: After an IP address has been assigned to the

SRCOOLNET2, try to access it with a Web browser that supports Java™. Open a

Web browser on a computer connected to the LAN and enter the SRCOOLNET2’s

IP address. The user name is localadmin and the default password is localadmin.

After you enter the user name and password, the PowerAlert Status page will

appear in the browser window. For more information about configuration and

operation of the managed device, refer to the Owner’s Manual, available for

download at www.tripplite.com.

Note: When using the SRCOOLNET2 with the SRCOOL7KRM or SRCOOL18K, do

not use the cooling unit’s manual control panel.

4-5 Remove Configuration Cable: Remove the configuration cable that connects

the SRCOOLNET2 to the computer.

15-02-247-93342E.indb 9 4/9/2015 9:52:08 AM

Installation

6 - Using ENVIROSENSE®and Remote Temperature

Setpoint Control

SRCOOLNET2 supports the use of the ENVIROSENSE environmental sensor (included)

to control the unit instead of the default temperature sensor in the AC unit’s return

airstream. The ENVIROSENSE sensor can be located in the area you wish to control to

the specific setpoint.

6-1 Configuring SRCOOLNET2 for Remote Setpoint Usage

To use the Remote Temperature Setpoint mode of operation, ensure that the

ENVIROSENSE device is installed and connected to the SRCOOLNET2 A.

ENVIROSENSE

MODULE

SRCOOLNET2

ENVIROSENSE

MODULE

SRCOOLNET2

15-02-247-93342E.indb 10 4/9/2015 9:52:09 AM

Tabla de contenidos

Idiomas:

Otros manuales de Mando a distancia de Tripp Lite

Tripp Lite

Tripp Lite PINVRM Manual de usuario

Tripp Lite

Tripp Lite APS/PV Manual de usuario

Tripp Lite

Tripp Lite B051-000 Manual de usuario

Tripp Lite

Tripp Lite Keyspan URM-15T Manual de usuario

Tripp Lite

Tripp Lite PR-PRO4 Manual de usuario

Tripp Lite

Tripp Lite PR-PRO4 Manual de usuario

Tripp Lite

Tripp Lite TVI-PRO1 Manual de usuario

Tripp Lite

Tripp Lite B051-000 Manual de usuario

Tripp Lite

Tripp Lite ER-V2 Manual de usuario

Tripp Lite

Tripp Lite TuneView RF Manual de usuario

Tripp Lite

Tripp Lite B051-000 Manual de usuario

Tripp Lite

Tripp Lite APSRMSW Manual de usuario

Tripp Lite

Tripp Lite TVI-PRO1 Manual de usuario

Tripp Lite

Tripp Lite Pro Gyro PR-PR04 Manual de usuario

Tripp Lite

Tripp Lite ER-V2 Manual de usuario

Tripp Lite

Tripp Lite URM-17A Manual de usuario

Tripp Lite

Tripp Lite TVI-200C Manual de usuario

Tripp Lite

Tripp Lite PR-EZ1 Manual de usuario

Tripp Lite

Tripp Lite PR-PRO3 Manual de usuario

Tripp Lite

Tripp Lite Keyspan Wireless Presentation Remote PR-US2 Manual de usuario

Tripp Lite

Tripp Lite TVUSB-PRO5 Manual de usuario

Tripp Lite

Tripp Lite PR-US2 Manual de usuario

Tripp Lite

Tripp Lite ER-RF1 Manual de usuario

Tripp Lite

Tripp Lite TuneView TVU-200C Manual de usuario

Manuales populares de Mando a distancia de otras marcas

Panasonic

Panasonic EUR7622KB0 Manual de usuario

Bang & Olufsen

Bang & Olufsen Beo4 Manual de usuario

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manual de usuario

Multiplex

Multiplex PROFI TX 9 Manual de usuario

One Remote

One Remote RMB4 Manual de usuario

FUTABA

FUTABA 9ZAP - PART2 Manual de usuario

HR Matic

HR Matic HR MULTI 3 Manual de usuario

Yamaha

Yamaha ACC-GNRST-30-20 Manual de usuario

EisSound

EisSound KBSOUND Manual de usuario

Marantz

Marantz RC101 Manual de usuario

Conrad

Conrad FS20 TC6 Manual de usuario

Anritsu

Anritsu MP1777A Manual de usuario

Niles

Niles WVC100 Guía de solución de problemas

RCA

RCA RCU1300 Manual de usuario

Bang & Olufsen

Bang & Olufsen BEO6 Manual de usuario

GE 94901 Manual de usuario

Onbon

Onbon YQ1-75 Manual de usuario

FUTABA

FUTABA R7108SB Instrucciones de instalación