Tripp Lite SRCOOL3KTP Manual de usuario

Owner’s Manual

Top-of-Rack Precision

Air Conditioning System

DX Air-Cooled, ~9U, Self-Contained, 60 Hz, UL

Model: SRCOOL3KTP

(Series Number: AG-054D)

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

WARRANTY REGISTRATION

automatically entered to win an ISOBAR®

surge protector in our monthly drawing!

tripplite.com/warranty

Español 25 • Français 49

1. Important Safety Information 3

1.1 Handling Information 4

2. Introduction 5

3. General Information 6

3.1 External Features 6

3.2 Physical 7

3.3 Environment 8

3.4 Unpacking 8

4. Installation 9

4.1 Installing the Unit on a Rack 10

4.2 LCD Screen Mounting 10

(SR25UBAC or SR33UBAC

Models Only)

4.3 Electrical Installation 12

4.4 Communications 13

4.5 Condensate Drainage 14

5. Operation 15

5.1 Start Up 15

5.2 Homepage 16

5.3 Settings 17

5.4 Maintenance Mode 18

5.5 Data Menu 19

5.6 Graphs Menu 20

5.7 Alarm Menu 20

6. Maintenance 21

7. Troubleshooting 22

8. Optional Accessories 23

9. Warranty and 24

Product Registration

Table Of Contents

1. Important Safety Information

Only those who are properly trained or qualiﬁed to use this appliance should do so. Anyone who is not trained or qualiﬁed

should not use this device unless it is under the supervision of someone who is properly trained or qualiﬁed to do so. Children

must be supervised to ensure that they do not use the appliance as a toy. This appliance is classiﬁed as APPLIANCE NOT

ACCESSIBLE TO THE GENERAL PUBLIC. If the supply cord is damaged, it must be replaced by the manufacturer, its service

agent or similarly qualiﬁed persons in order to avoid a hazard. The appliance should be installed in accordance with national

wiring regulations GWP for R410A (R32/125: 50/50): 2087.5. An all-pole disconnection device which has at least 3 mm

separation distance in all pole and a residual current device (RCD) with the rating of above 10mA shall be incorporated in the

ﬁxed wiring according to the national rule.

Explanation of Symbols

The following symbols illustrate messages to warn of potential danger and need for caution and attention.

This symbol indicates that with failure to comply with the instructions, there will be a risk of electric shock resulting in

injury, as noted in the “DANGER” or “WARNING” safety labels.

This is a safety alert symbol used to warn of potential personal injury hazards. Follow all safety information to avoid

personal injury or death that may arise.

DANGER

DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

SAVE THESE INSTRUCTIONS

Prior to installation, operation, maintenance, or servicing of this equipment, read this manual thoroughly.

Keep in mind the following symbols that may appear so as to warn of potential danger or attention.

WARNING

WARNING indicates a potentially hazardous situation which, if not avoided, can result in death or serious injury.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, can result in minor or moderate injury.

NOTICE

NOTICE addresses practices not related to physical injury including certain environmental hazards, potential

damage or loss of data.

1. Important Safety Information

WARNING

Hazard from moving parts

• Keep hands, clothing and jewelry away from moving parts. Check the equipment for foreign objects before

closing the doors and starting the equipment.

Failure to observe this warning may result in death or serious injury.

CAUTION

Hazard to equipment or personnel

• All work must be performed only by qualiﬁed personnel.

Failure to observe this warning may result in death or serious injury.

WARNING

Hazard of equipment falling over

• Always use two or more persons to move or turn this equipment.

Failure to observe this warning may result in serious injury or equipment damage.

CAUTION

Hazard to equipment or personnel

• Make sure no spare parts or tools are in the equipment before handling the equipment.

Failure to observe this warning may result in serious injury or equipment damage.

CAUTION

Refrigerant high pressure and hazard to equipment

• This unit operates under high pressure. Observe proper safety precautions when operation or servicing the unit.

• The equipment is to be charged with R-410A only.

Failure to observe this warning may result in serious injury or equipment damage.

1.1 Handling Information

Read handling information prior to installing, operating, servicing or maintaining the equipment. Comply with local regulations

and laws when handling refrigerant.

DANGER

Hazard of electric shock, explosion or arc ﬂash

• Apply appropriate personal protective equipment (PPE) and follow safe electrical work practices.

• This equipment must be installed and serviced by qualiﬁed personnel only.

• Comply with all local and national wiring and safety regulations applicable where unit will be installed.

• Turn off all power supplying this equipment before working on or inside of the equipment.

• Always use a properly rated voltage sensing device to conﬁrm power is off.

• Replace all devices, doors and covers before turning on power to this equipment.

Failure to observe this warning may result in death or serious injury.

2. Introduction

The SRCOOL3KTP Top-of-Rack Air Conditioning Systems are precision, self-contained, DX air-cooled systems.

These systems do not require piping from indoor to outdoor, nor do they require any special cooling infrastructure (an optional

duct is available to supplement smaller environments). As a result, these dedicated cooling systems’ design enables them to

operate independently of the building’s HVAC/comfort cooling system.

For safety and protection, the cooler includes internal leak detection to prevent condensate from entering the rack below by

turning off the cooling system.

The unit arrives ready for use and does NOT require charging with refrigerant.

Notes:

• These are cooling-only devices with no heating capability.

• For maximum efﬁciency, the AC unit is intended for use with Tripp Lite SR25UBAC and SR33UBAC racks, but can be used with other racks

as well.

• The AC unit requires at least 2U of open space in the uppermost U spaces for proper air clearance.

• The system design is for edge environments and network closets. It is not designed for harsh or dirty environments.

• For maximum cooling performance, ensure all U spaces without equipment have blanking panels installed.

3.1 External Features

3. General Information

1Condenser fan

2Condenser

3Front panel

4Nameplate

5Emergency airﬂow access panel

3.2 Physical

3. General Information

Net weight – lb. (kg) 160 (73)

Shipping weight – lb. (kg) 192 (87)

Figure 3-3: Rear

Figure 3-5: Top

Figure 3-2: Front

Figure 3-4: Bottom

Figure 3-6: Side

3. General Information

3.3 Environment

Maximum Operating Temperature

• Inside rack: up to 100°F (37°C)

• Outside rack: up to 95°F (35°C)*

* Cooling performance will be reduced if the outside rack temperature reaches 95~113°F (35 ~ 45°C).

If the outside rack temperature is greater than 113°F (45°C), the system will go into protection mode (standby).

Performance-Rated Conditions

• Inside rack: 64.0-98.6°F (17.7~37°C), 20%~80%

• Outside rack: 55.4-95°F (13~35°C)

Minimum/maximum air temperature cooling mode test conducted at:

• Min: inside rack 55°F (12.8°C), outside rack 46.4°F (8°C)

• Max: inside rack 116.6°F (47°C), outside rack 113°F (45 °C)

3.4 Unpacking

Use care when unpacking the unit. The unit should be placed on its pallet as close to the ﬁnal installation location as possible

to minimize having to move the unit at a later time.

4. Installation

The SRCOOL3KTP is designed to work in conjunction with Tripp Lite’s SR25UBAC or SR33UBAC rack enclosures, but it can also

be used with any standard rack with an open top to deliver precision cooling to installed equipment.

When installing the SRCOOL3KTP on a non-Tripp Lite rack, please consider the following:

• The amount of space available near the top of the rack. The SRCOOL3KTP requires that the ﬁrst 4U of space below the

cooler is open for proper air ﬂow.

• Access to the electrical connections for power and the connector for the display needs to be provided.

• The spacing for the mounting holes to secure the SRCOOL3KTP is ﬁxed and should not be modiﬁed. If the

mounting holes do not work with the rack, consider replacing the rack with a SR25UBAC or SR33UBAC.

• Due to the weight of the SRCOOL3KTP, it is not recommended to install the unit on a rack that exceeds 33U in

height.

• A mount for the display used for the SRCOOL3KTP is not provided. It is upon the discretion of the end user to

determine a mounting means suitable for the rack in use. Alternately, the SRCOOL3KTPDISBKT accessory can be used to

mount the display to most rack doors, both vented and non-vented.

• The SRCOOL3KTP is supplied with 4 M8-20 mm bolts, lock washers and ﬂat washers to secure the unit to the top

of the rack. Only the provided hardware and mounting locations should be used. For reference, the mounting pattern is:

19.13 in. / 486 mm

37.26 in. / 946 mm

4. Installation

4.1 Installing the Unit on a Rack

Using a platform jack or forklift capable of reaching a parallel height with the rack, lift the unit next to the rack. Carefully slide

the unit onto the top of the rack. To access the mounting holes, remove the rear cover and front cover of the unit. Using the

supplied hardware, bolt the unit into place on the top of the rack.

Figure 4-1: Install AC unit to rack (SR25UBAC rack shown.)

4.2 LCD Screen Mounting (SR25UBAC or SR33UBAC Models Only)

An opening for the LCD display is provided in the door of the SR25UBAC and SR33UBAC rack enclosures.

To install the LCD:

• Place the LCD screen into the metal bezel to protect the glass edge of the LCD.

• Place the LCD screen into the opening in the rack door.

• Place the supplied fasteners into the slots only into the top two slots of the LCD panel.

• Hand tighten the screws until they make contact with the door.

• Torque the screws to 5 inch pounds (0.56 N-m). Do not exceed 6.17 inch pounds (0.7 N-m), or the glass may crack.

Note: The bottom two screws are

not used.

Tabla de contenidos

Idiomas:

Otros manuales de Acondicionador de aire de Tripp Lite

Tripp Lite

Tripp Lite SRXCOOL7KRM Manual de usuario

Tripp Lite

Tripp Lite SRXCOOL12KB Manual de usuario

Tripp Lite

Tripp Lite SRXCOOL33K Manual de instalación y operación

Tripp Lite

Tripp Lite SRCOOL33K Manual de usuario

Tripp Lite

Tripp Lite SRCOOL33K Manual de usuario

Tripp Lite

Tripp Lite SRCOOLDXRW12OD Manual de usuario

Tripp Lite

Tripp Lite SRCOOLDXRW12 Manual de usuario

Tripp Lite

Tripp Lite AG-054D Manual de usuario

Tripp Lite

Tripp Lite SRCOOL12K Manual de usuario

Tripp Lite

Tripp Lite SRCOOL12K Instrucciones de instalación y funcionamiento

Tripp Lite

Tripp Lite SRXCOOL12KA Manual de usuario

Tripp Lite

Tripp Lite SRCOOL12K Manual de usuario

Tripp Lite

Tripp Lite AG-0548 Series Manual de usuario

Tripp Lite

Tripp Lite SRCOOLDXRW25OD Manual de usuario

Tripp Lite

Tripp Lite SRXCOOL12K Manual de usuario

Tripp Lite

Tripp Lite SRCOOL12KWT Series Manual de usuario

Tripp Lite

Tripp Lite SRCOOL2KWM Manual de usuario

Tripp Lite

Tripp Lite AG-0677 SRXCOOL12KEU Manual de usuario

Tripp Lite

Tripp Lite SRXCOOL33K Manual de usuario

Tripp Lite

Tripp Lite SRCOOL7KRM Manual de usuario

Tripp Lite

Tripp Lite SRCOOL33K Manual de usuario

Tripp Lite

Tripp Lite SRCOOL33K Manual de usuario

Tripp Lite

Tripp Lite SRCOOL12K Manual de usuario

Tripp Lite

Tripp Lite SRXCOOL33K Manual de usuario

Manuales populares de Acondicionador de aire de otras marcas

Spheros

Spheros CC 355 Manual de usuario

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manual de usuario

Panasonic

Panasonic CS-E12HKEW Manual de usuario

nedis

nedis ACMB1WT7 Manual de usuario

Samsung

Samsung AR KV Series Guía

Daikin

Daikin FCFV50A Manual de usuario

Fujitsu

Fujitsu Inverter ASBA30JFC Manual de usuario

Toshiba

Toshiba RAS-M10SMUV-E Manual de usuario

Daikin

Daikin FXLQ20MAVE Manual de usuario

Hitachi

Hitachi RAS-E24CAK Manual de usuario

CIAT

CIAT Magister 2 Series Guía

Bestron

Bestron AAC6000 Manual de usuario

Hisense

Hisense 7K Manual técnico

Frigidaire

Frigidaire FFRE0533S1E0 Manual de usuario

Samsung

Samsung AS09HM3N Manual de usuario

Frigidaire

Frigidaire CRA073PU11 Manual del propietario

Soleus Air

Soleus Air GB-PAC-08E4 Manual de usuario

McQuay

McQuay MCK020A Manual de usuario