Triplett CamView W35v Manual de usuario
CamView W35v
Wrist Mounted Test
Monitor with 3.5” LCD
Instruction Manual
1-12
CamView W35v
Page 1
• Thank you for purchasing the Triplett CamView W35v CCTV Monitor.
Please read the complete manual carefully before using the product.
• To assure safe use of this product, please read the section on Safety
carefully, and observe any Cautions or Warnings posted there and
throughout this manual.
• Please keep this manual for future reference.
Page 2
Table of Contents
Safety Information .......................................................................1
Introduction ...................................................................................2
Features ...........................................................................................3
Included Items ...............................................................................4
Controls and Indicators ...............................................................5
Battery Information .....................................................................6
Installing and Charging the Batteries .....................................7
General Instructions .....................................................................8
Troubleshooting ..........................................................................10
Warranty .........................................................................................11
9
.
Page 3
1: Safety Information
Dear Customer:
For greatest safety and reliable operation, please follow these guide
lines for use and care of the product. Please retain these instructions
for future reference.
1. Do not expose the product to excessive dust or dirt, intense
vibration, extreme humidity, or high temperatures.
2. If the product is damaged, there is a burnt smell, or smoke comes
out of the case, immediately turn it o, take out the batteries, and
the user.
3. Do not take the product apart. Modifying the internal electronics
4. Do not use the product with damaged cables or a damaged charger.
5. Do not pull or stress the cables plugged into the product. Doing so
may damage the cables or the connectors on the product.
6. Do not use the product in a manner in which it may fall and be
damaged.
7. Use only the rechargeable batteries provided with the product, or
approved equivalents.
Page 4
8. Do not drop, strike, bend, or crush the batteries. Do not place the
batteries in a metal container. Failure to observe this precaution
9. Use only the charger provided with the product. Use of a dierent
10. Do not exceed the input voltage rating of the charger
(110~240 VAC / 50/60 Hz).
11. If battery leaks, avoid any contact with your eyes, skin, or clothing.
contact a doctor for additional instructions.
12. Clean the monitor with a damp cloth and mild detergent. Do not
use solvents as they may damage the product’s case or LCD
screen.
13. When the product will not be used for more than 1 month,
disconnect it from the charger and remove the batteries for
storage.
14. When the batteries are charged, disconnect the charger to prevent
overcharging.
15. Do not get the product wet. Do not submerge it in water. Injury or
shock may result.
Page 5
16. Do not leave the product exposed to direct sunlight.
17. Do not allow children to use the product.
18. It is normal for the product to heat up while being used.
19. It is normal for the product to heat up while its batteries are
charging. If possible, place the product in a ventilated area while
the batteries are charging.
Wash hands with soap and water. Flush eyes with water.
21. This product may interfere with sensitive electronic equipment.
Do not use in areas where prohibited (such as airplanes or
hospitals).
Page 6
2: Introduction
The Triplett CamView W35v is a portable battery operated video monitor
designed to aid CCTV and Security electronics installers and mainte -
nance technicians. It’s high contrast 3.5” LCD screen provides a large
image that is especially useful for adjusting camera setup, focus, and
positioning, as well as viewing the video signal from DVR’s, DVD’s,
VCR’s, or other video equipment. It is provided with an adjustable
band for use as a wrist monitor, and it also includes a built-in stand for
input and output connections. The rugged yet lightweight construction
and ergonomic design maximizes convenience and portability, and the
6 hour NiMH rechargeable battery delivers extended runtime. All video
settings (Brightness, Contrast, Saturation, Sharpness) are adjustable
saving test tool that will enhance any professional tool kit.
via an On Screen Menu. The Triplett CamView W35v is an ecient time
desktop operation. A 12VDC (350mA) output is provided to power a
typical video camera, allowing complete camera setup before the rest
of the installation has been completed. BNC video input and output
jacks allow video to be ‘Looped Thru’ the CamView for local as well
as remote display. Audio is supported with a built in speaker and audio
Page 7
3: Features
• 3.5” High Contrast Active Matrix TFT LCD Screen
• High Brightness Daylight Viewable Display
• Wrist Mount or Desktop Use
• 6 Hour Rechargeable Batteries Included
• BNC Video Input Jack
• On Screen Display of Video Settings
• Audio Support (built in speaker)
• Auto NTSC/PAL Operation
• Auto Standby Mode Saves Battery Power
• Tripod Thread
• SilkGrip Finish
• Carrying Case Included
• Cables Included
• 1 Year Warranty
4: Included Items
• CamView W35v
• NiMH Batteries
• Battery Charger
• Adjustable Wrist Strap
• BNC Jumper Cable
• RCA Audio/Video Input Cable
• RCA Audio/Video Output Cable
• Instruction Manual
• Storage Box
• BNC Video Output Jack (Loop Thru)
• 12VDC (350mA) Output to Power Video Camera
• 12V Power Cable with 5.5mm
Coaxial Connector
• Carrying Case
Page 8
5: Controls and Indicators
1. Built-in 1 Watt speaker
2. Power / Charging Indicator, Bi-color LED (Red, Green)
3. MENU / Select Button
4. Increase Setting
5. Decrease Setting
6. MENU OFF
7. Charger Input (Power in)
8. Power Switch (OFF / ON)
9. Audio/Video Input (Camera in)
10. Audio/Video Output (AV out)
11. BNC Video Input
14. ¼ x 20 Mounting Thread
DC12V out
CamView W35v
POWER
MENU
MENU OFF
13. 12VDC Camera Power
12. BNC Video Output
2
3
4
5
6
1
14
12
13
Page 9
6: Battery Information
or explosion, observe the following instructions and warnings.
• If the product is unused for several weeks, the batteries will slowly
discharge by themselves. Recharge the batteries before use.
• It is normal for batteries to heat up while charging or discharging.
• Battery performance is reduced at low temperatures. If cold, allow
the batteries to warm gradually. Do not warm the batteries with a
heater or oven. This could cause the batteries to explode.
• It is normal for batteries to age and exhibit reduced performance
after several hundred charging cycles. If the batteries won’t operate
the product for the stated time (6 hours) or the batteries do not hold
a charge, replace the batteries with equivalent types.
• If the product will not be used for some time, remove the
batteries and store them in a dry location with moderate
temperature and humidity.
To obtain the maximum battery life and aviod battery leaks, fire
Tabla de contenidos
Otros manuales de Monitor de Triplett
