trinityhighway.com 4 Revision D September 2019
Safety Symbols
This section describes the safety symbols that appear in this manual. Read the manual for
complete safety, assembly, operating, maintenance, repair, and service information.
Symbol Meaning
Safety Alert Symbol:
Indicates Important, Caution, Warning, or Danger. Failure
to read and follow the Important, Caution, Warning, or Danger indicators could
result in serious injury or death to the workers and/or bystanders.
Warning:
Read safety instructions thoroughly and follow the assembly directions
and suggested safe practices before assembling, maintaining, or repairing the
QuadGuard
®
II. It is the responsibility of the installer to follow these warnings.
Failure to comply with these warnings could result in increased risk of serious injury
or death in the event of a vehicle impact with a system.
Important:
Please keep up-to-date instructions for later use and reference by
anyone involved in the assembly of the product.
Safety Rules for Assembly
* Important Safety Instructions *
This manual must be kept in a location where it is readily available to persons who are skilled and
experienced in the assembly, maintenance, or repair of the QuadGuard
®
II. Additional copies of
this manual are available from Trinity Highway by calling (888) 323-6374, or by email at
[email protected],
or
at
trinityhighway.com. Please contact Trinity Highway if you have any questions concerning the information in this manual or about the QuadGuard
®
II.
It is the responsibility of the installer to use appropriate safety precautions when operating power
equipment, mixing chemicals, and when moving heavy equipment or QuadGuard
®
II components.
Safety articles including but not necessarily limited to work gloves, eye protection, safety-toe
shoes, and back support should be used.
Warning:
It is the responsibility of the installer to use all safety measures
incorporating appropriate traffic control devices specified by the highway authority.
These measures must be used to protect all personnel while at the assembly,
maintenance, or repair site.
Warning:
Failure to comply with these warnings could result in increased risk of
serious injury or death in the event of a vehicle impact with a system that has not
been accepted by the FHWA.
Warning:
Use only Trinity Highway parts on the QuadGuard
®
II for assembly,
maintenance, or repair. The use of component parts not specified herein is strictly
prohibited. The QuadGuard
®
II assembled with Trinity Highway parts has been
tested, approved, and accepted for state use by the FHWA. A QuadGuard
®
II using
parts other than those specified herein has not been tested,approved, or accepted
for state use by the FHWA. Failure to follow this warning could result in increased
risk of serious injury or death in the event of a vehicle impact.
