Install Gateway Editor on your PC or laptop
Gateway Configuration Editor is the Windows application used to
create or edit the configuration which governs how the panels
are arranged, what type of keys are present and the membership
of groups, conferences and IFBs. Gateway also manages the
deployment of your revised configuration to the Messenger
system. Gateway should not be installed on the Messenger
matrix itself.
Insert the supplied CD into your PC and from the menu, select the
option to “Install Software”. Only one components should be
installed - “Gateway Configuration Editor”. As we will explain in
the following section, the database resides on Messenger. You
should normally accept all other default options.
When prompted for the address of the database, enter the IP
address of the Messenger Windows Host as recorded above.
When complete, close the installation program. Before removing
the CD, use Windows Explorer to browse the CD and to copy the
documents and configurations to your PC.
Windows firewall
In order to allow your PC to connect to the database, a number of
ports must be opened on the PC firewall. We can supply scripts to
automate this process for Microsoft Windows Firewall: for other
firewalls please consult the documentation supplied with that
product.
To carry out the task manually, the following ports must be
opened to allow inbound access:
•TCP 12005 management database data
•TCP 12006 management database control
•TCP 13001 management database supervisor
