The small “hand” symbol represents an instruction
option for the model 90-0123 Handsfree Set.
Making an Outgoing Call
Each TalkTo 7032 Set user has access to each of
the ten outside lines (unless programmed otherwise) by
pressing a line select key. If a line indicator lamp is On,
that line is in use.
On-~-lool~ Dialing (with the handset in the cradle)
n Press the line key of an unused outside line.
n Dial the telephone number.
n When the call is answered, lift the handset.
I-
t:i11). j
~‘! ii! Handsfree Sets may remain on-hook provided
the microphone indicator is On.
n If the call is unanswered, press the speaker key.
o~~~~-i~osl;Diaiing (Ln.iEkhehe handsel liAed)
n Lift the handset.
n Press the line key of an unused outside line.
n Dial the telephone number.
Answering an Incoming Call
-1‘a Answer- ai7 hxming Call
n Lift the handset.
; ,t’ij Handsfree Sets may remain on-hook provided
the microphone indicator is On.
w Press the appropriate line key.
Last Number Redial
The last number dialed at your Set is automatically
saved and can be redialed on any line, either with the
handset on-hook or off-hook.
m+1690E( Dialiq-J
n Press the line key of an unused outside line.
I Press the redial key.
n When the call is answered, lift the handset.
Handsfree Sets may remain on-hook provided
the microphone indicator is On.
OM-I-IQ& Dialjng
n Lift the handset.
n Press the line key of an unused outside line.
n Press the redial key.
Call Hold
I-0 1’6ace ai? cJJ~,si& Call 012/-l&i
n Press the hold key (line indicator flashes). The
handset may be placed on-hook.
To Retrieve the Call at Any Set
n Lift the handset.
m Handsfree Sets may remain on-hook provided
the microphone indicator is On.
n Press the appropriate line key.
Call Transfer
To Transfer a Call to Another Set
n Press the hold key (line indicator flashes).
n Press and release the hook&itch (a continuous tone
is heard).
lT!il Handsfree Sets may remain on-hook.
Ensure the microphone indicator is On.
Press the speaker key.
n Dial the number of the desired station (one tone
burst is heard) and announce which line the call is
on.
H If the called party is not available, press the key of
the line on hold to retrieve the call.
Exclusive Call Hold
Exclusive Call Hold allows the call to be retrieved
only at the Set which placed the call on Exclusive Hold.
To Place
a Call on Exclusive Weld
n Press the hold key twice (line indicator flashes
quickly).
The handset may be placed on-hook.
T0 Retrieve a Call on Exclusive
Hold
n Lift the handset.
m Handsfree Sets may remain on-hook provided
the microphone indicator is On.
n Press the appropriate line key.
Line Monitoring
If you are put on hold during an outside call you can
monitor the outside line through the speaker while you
are waiting.
0 Press the speaker key.
Audio from the outside line is now heard through the
speaker.
n Replace the handset.
When you hear the caller return, lift the handset and
continue the call.,
Conference Calls
An external or an internal call may be added to an
existing call to form:
n a one external and two internal party conference.
9
