
3951 Westerre Parkway, Suite 350
Richmond, Virginia 23233 USA
NPB-LON Option
INSTALLATION SHEET
NPB-LON Option Installation Sheet
Part Number 10620 Rev. 2 Updated:May29, 2009 1
Information and specifications published here are current as of the date of publication of this document. Tridium, Inc. reserves the right to change or modify
specifications without prior notice. The latest product specifications can be found by contacting our corporate headquarters, Richmond, Virginia. Products or
features contained herein may be covered by one or more U.S. or foreign patents. © 2009 Tridium, Inc.
Thisdocumentcoversthemountingandwiringofthe
NPB‐LON1optioncardinaVykon®JACEcontroller
(JACE‐200/600,SEC‐J‐x01,orJ‐202‐XPRseries).
RefertotheappropriateJACE®mountingandwiring
documentforfurtherJACEinstallationdetails.
Included in this Package
Includedinthispackageyoushouldfindthe
followingitems:
•NPB‐LONoptioncard,connectorendplate.
•one2‐positionterminalplug,forwiringtoan
FTT‐10LonWorks®network
•ThisNPB‐LONOptionInstallationSheet,Part
Number10620Rev.2
Material and Tools Required
Thefollowingtoolsandsuppliesmayberequiredfor
installation:
•#2phillipsscrewdriver:toinstalltheNPB‐LON.
•Smallflat‐bladescrewdriver:tomakewiring
connectionstotheFTT‐10Lonworksnetwork.
•#1phillipsscrewdriver:toremoveandrefasten
J‐202‐XPRcovers(ifapplicable).
Figure 1 NPB-LON option.
Mounting
Warning PowertotheJACEmustbeOFFwhen
installingorremovingoptioncards,or
damagewilloccur!Also,youmustbevery
carefultopluganyoptioncardintoits
connectorproperly(pinsaligned).
MounttheNPB‐LONoptioncardineitherofthe
optioncardslotsoftheJACE,asneeded.Notethe
J‐202‐XPRserieshasonlyoneoptioncardslot.
Procedure 1 Mounting NPB-LON option card on a JACE.
1.
Remove powerfromtheJACE—seetheprevious
Warning.WaitforallLEDsontheunittobeOff.
2.
RemovetheJACEcoverorcovers(J‐202‐XPR).
ForallbuttheJ‐202‐XPR,pressinthefourtabson
bothendsoftheunit,andliftthecoveroff.
Note Ifaccessorymodulesarepluggedintothe
JACE,youmayneedtoslidethemawayfrom
theunittogettothecovertabs.
FortheJ‐202‐XPR,firstremovetherightcover,
thentheleftcover,retainingthetwoscrewsthat
secureeachcover.
1. LON and LonWorks are registered trademarks of the Echelon
Corporation.
Table 1 NPB-LON option description.
Description Notes / LON Port Assignments
FTT-10A LON
(LonWorks)
adapter with a
2-position
removable
screw-terminal
connector
plug.
Up to 2 LON®option cards may be installed
(note that the J-202-XPR series controller
accepts only one option card).
•If one LON option, it operates as LON1,
regardless of Option slot.
•If two LON options, LON1 is Option slot 1,
LON2 is Option slot 2.
See Figure 2 on page 2 for location of
Option Slots 1 and 2 on a JACE-200/600.
NOL
XTXR