Triad DamSurge Valve Manual de usuario
1
Operator Manual
www.damsurgevalve.com
D
Flood Irrigation
amSurge Va lv
e
2
ASSEMBLING THE SYSTEM .........................................................................PAGE 2
MAIN STATUS SCREEN..................................................................................PAGE 3
BASIC PROGRAMMING..................................................................................PAGE 6
PROFESSIONAL PROGRAMMING..............................................................PAGE 8
PRO-ELITE PROGRAMMING........................................................................ PAGE 11
WARRANTY....................................................................................................... PAGE 13
3
The SurgeSmart Controller
The SurgeSmart Controller can be mounted using the provided hardware. Your unit will include
(4) 1/4”-20 X 3/4” screws.
The On/Off switch ( 1 ) is located on the bottom of the unit, directly below the touchscreen. In order
to conserve battery power when the unit is not in use, the switch must be moved to the “Off” position.
This unit includes a rechargeable lithium ion battery and a solar panel. The unit must be in direct
sunlight in order for the solar panel to recharge the battery. This unit is also equip with external
charging ports. The external charging ports are located on the bottom of the unit on either side of
the On/Off switch. The positive post ( 2 ) is marked by a Gold colored fastener and the negative post
( 3 ) is marked with a black colored fastener. The unit can be charged using a small trickle charger
if needed.
3
3
-
1
1
22
+
^
^
^
^
^
^
Top
Bottom
4
M S
S
On the Main Status Screen you are able to see the status of currently running programs.
At the top of the screen there are 2 arrows to indicate what direction the water is currently owing.
If the water is owing right, the top right “Flow Direction” arrow will be green. If the water is
owing left, the top left “Flow Direction” arrow will be green.
In between the “Flow Direction” arrows at the top of the screen there is a number eld. This will
display how many cycles are remaining in the program.
The number elds to the left of the “Press to Start” button display how many hours and minutes are
remaining for the current cycle
5
M S
S
The “Press to Start” button activates the programs and/or times entered into the “Basic”,
“Professional” “Pro Elite” settings.
The “Left Jog” and “Right Jog” arrows are used to manually turn the buttery from left to right.
To change the display language from English or Spanish, simply press and hold the button in the
bottom left corner until the menu appearance changes to the desired language.
At the bottom of the screen are 3 program options, “Basic”, “Professional” and “Pro Elite”. Select
the desired program and enter your preferences based on the parameters of the selected program.
Sleep Mode
The touch screen will go into sleep mode if inactive for 1 min. Tap the screen or close then open
the cover to wake the screen.
When the cover is closed the screen will automatically go into sleep mode. When the cover is
opened the screen will come on if the switch on the bottom of the Controller is “On”.
6
P
Y S
3 LEVELS OF PROGRAMMING OPTIONS
BASIC PAGE
Basic allows you to select the right and left side of your eld and manually enter the amount of time
you wish to water each side. Enter the number of minutes you want in the “Left Flow” and “Right
Flow” boxes.
The system will default to start on the Right Flow. If you wish to start on the Left Flow select the
“Left Start” button in the bottom left of the screen.
7
Select the red “Enter” button between the two boxes once you have entered the time for each side.
P
Y S
When you nish imputing your preferred settings, select the “Back” button to return to the main
status screen then select the “Press to Start” button.
^
^
8
P
Y S
PROFESSIONAL PAGE
Professional allows you to select individual Surge and Soak programs based on individual eld
requirements.
Enter the desired program number from the charts on the next page into the “Surge Program” and
“Soak Program” elds.
You may also enter the percentages for the left and right ows. The default setting is 50% left and
50% right. When you enter a percentage into the “Right Percent” eld, the system will automatically
calculate the remaining percentage for the “Left Percent” eld. This feature is for elds that
are different sizes on each side of the valve.
9
P
Y S
PROFESSIONAL PAGE
The system will automatically calculate and adjust the times for each side based on the Surge and
Soak programs selected and the left and right ow percentages entered.
The programs will start on the right side as default. If you wish to start on the left side, select the
“Left Start” button in the bottom left corner of the screen.
When you return to the Main Status Screen, select the “Press to Start” button.
Then press the “Back” button at the bottom of the screen.
Once you have entered your preferences press the “Enter” button in the center of the screen.
10
P
Y S
The following charts list the times for each program. The times listed are in hours and
minutes (hh:mm, 1:18 = 1hr and 18min). The program numbers to be entered in the “Surge
Program and “Soak Program” elds are highlighted in yellow.
PROFESSIONAL PAGE
Tabla de contenidos
Manuales populares de Sistema de riego de otras marcas
Hunter
Hunter Institutional Series Manual de usuario
Cellfast
Cellfast 52-305 Manual de usuario
Tyco Fire Product
Tyco Fire Product Star Galaxy SGQR Manual de usuario
Tyco Fire Product
Tyco Fire Product CENTRAL A Manual de usuario
Oral Care Technologies
Oral Care Technologies Hydro Floss Manual de usuario
Reliable
Reliable F1-300 Manual de usuario
