
included
in the box
Initial Check
The Open 4 Series is shipped in two (2) oversized boxes. Within these boxes you will nd Two (2)
crossover boxes. Upon receiving the boxes please check their condition and ensure the arrows
on the box are pointing upward. If any of the packaging is or even appears to be damaged, please
report it to the shipping company immediately for insurance verication. We always suggest
keeping the original packing for maximum resale value or for safely moving the equipment to a
different location. Please ll out the warranty card.
The serial numbers for the speakers are located at the bottom of the speakers.
The following items are recommended for this procedure:
• Spirit Level
• Digital Measuring Tool
Removing the Speaker from the Box
A minimum of two strong adults is required to set up the Open 4 Speakers. Locate the two largest
boxes. These contain the bafe enclosures and are the rst components of the system to unpack.
Note: These speaker enclosures are very heavy, and care should be taken to prevent injury.
1. With the arrow labels facing up, carefully cut or remove the binding tape.
Gently remove the lid.
2. Select the speaker by lifting it by grasping any one of the holes and secure it. Pay mind not to
squeeze any wiring and do not touch the drivers.
3. Firmly grasp the back of wood panel with both hands. Carefully, so as not to hit the speaker
on the side of the box, carefully lift the enclosure out of the box.
4. Ensure that you place the speakers on the oor carefully positioning them in their cradle feet.